+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2007 Michal Simek
* (C) Copyright 2004 Atmark Techno, Inc.
*
* Michal SIMEK <monstr@monstr.eu>
* Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#include <asm-offsets.h>
.text
.global _start
_start:
- /*
- * reserve registers:
- * r10: Stores little/big endian offset for vectors
- * r2: Stores imm opcode
- * r3: Stores brai opcode
- */
-
mts rmsr, r0 /* disable cache */
+
+ addi r8, r0, _end
+ mts rslr, r8
+
+#if defined(CONFIG_SPL_BUILD)
+ addi r1, r0, CONFIG_SPL_STACK
+#else
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
+#endif
+
addi r1, r1, -4 /* Decrement SP to top of memory */
+ /* Call board_init_f_alloc_reserve with the current stack pointer as
+ * parameter. */
+ add r5, r0, r1
+ bralid r15, board_init_f_alloc_reserve
+ nop
+
+ /* board_init_f_alloc_reserve returns a pointer to the allocated area
+ * in r3. Set the new stack pointer below this area. */
+ add r1, r0, r3
+ mts rshr, r1
+ addi r1, r1, -4
+
+ /* Call board_init_f_init_reserve with the address returned by
+ * board_init_f_alloc_reserve as parameter. */
+ add r5, r0, r3
+ bralid r15, board_init_f_init_reserve
+ nop
+
+#if !defined(CONFIG_SPL_BUILD)
+ /* Setup vectors with pre-relocation symbols */
+ or r5, r0, r0
+ bralid r15, __setup_exceptions
+ nop
+#endif
+
+ /* Flush cache before enable cache */
+ addik r5, r0, 0
+ addik r6, r0, XILINX_DCACHE_BYTE_SIZE
+ bralid r15, flush_cache
+ nop
+
+ /* enable instruction and data cache */
+ mfs r12, rmsr
+ ori r12, r12, 0x1a0
+ mts rmsr, r12
+
+clear_bss:
+ /* clear BSS segments */
+ addi r5, r0, __bss_start
+ addi r4, r0, __bss_end
+ cmp r6, r5, r4
+ beqi r6, 3f
+2:
+ swi r0, r5, 0 /* write zero to loc */
+ addi r5, r5, 4 /* increment to next loc */
+ cmp r6, r5, r4 /* check if we have reach the end */
+ bnei r6, 2b
+3: /* jumping to board_init */
+#ifdef CONFIG_DEBUG_UART
+ bralid r15, debug_uart_init
+ nop
+#endif
+#ifndef CONFIG_SPL_BUILD
+ or r5, r0, r0 /* flags - empty */
+ brai board_init_f
+#else
+ brai board_init_r
+#endif
+1: bri 1b
+
+#ifndef CONFIG_SPL_BUILD
+ .text
+ .ent __setup_exceptions
+ .align 2
+/*
+ * Set up reset, interrupt, user exception and hardware exception vectors.
+ *
+ * Parameters:
+ * r5 - relocation offset (zero when setting up vectors before
+ * relocation, and gd->reloc_off when setting up vectors after
+ * relocation)
+ * - the relocation offset is added to the _exception_handler,
+ * _interrupt_handler and _hw_exception_handler symbols to reflect the
+ * post-relocation memory addresses
+ *
+ * Reserve registers:
+ * r10: Stores little/big endian offset for vectors
+ * r2: Stores imm opcode
+ * r3: Stores brai opcode
+ * r4: Stores the vector base address
+ */
+__setup_exceptions:
+ addik r1, r1, -32
+ swi r2, r1, 4
+ swi r3, r1, 8
+ swi r4, r1, 12
+ swi r6, r1, 16
+ swi r7, r1, 20
+ swi r8, r1, 24
+ swi r10, r1, 28
+
/* Find-out if u-boot is running on BIG/LITTLE endian platform
* There are some steps which is necessary to keep in mind:
* 1. Setup offset value to r6
* 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
*/
addik r6, r0, 0x2 /* BIG/LITTLE endian offset */
- lwi r7, r0, 0x28
- swi r6, r0, 0x28 /* used first unused MB vector */
- lbui r10, r0, 0x28 /* used first unused MB vector */
- swi r7, r0, 0x28
+ sw r6, r1, r0
+ lbu r10, r1, r0
/* add opcode instruction for 32bit jump - 2 instruction imm & brai */
addi r2, r0, 0xb0000000 /* hex b000 opcode imm */
addi r3, r0, 0xb8080000 /* hew b808 opcode brai */
-#ifdef CONFIG_SYS_RESET_ADDRESS
+ /* Store the vector base address in r4 */
+ addi r4, r0, CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR
+
/* reset address */
- swi r2, r0, 0x0 /* reset address - imm opcode */
- swi r3, r0, 0x4 /* reset address - brai opcode */
+ swi r2, r4, 0x0 /* reset address - imm opcode */
+ swi r3, r4, 0x4 /* reset address - brai opcode */
- addik r6, r0, CONFIG_SYS_RESET_ADDRESS
+ addik r6, r0, CONFIG_SYS_TEXT_BASE
sw r6, r1, r0
lhu r7, r1, r10
rsubi r8, r10, 0x2
- sh r7, r0, r8
+ sh r7, r4, r8
rsubi r8, r10, 0x6
- sh r6, r0, r8
-#endif
+ sh r6, r4, r8
-#ifdef CONFIG_SYS_USR_EXCEP
+#if CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_USR_EXCEP)
/* user_vector_exception */
- swi r2, r0, 0x8 /* user vector exception - imm opcode */
- swi r3, r0, 0xC /* user vector exception - brai opcode */
+ swi r2, r4, 0x8 /* user vector exception - imm opcode */
+ swi r3, r4, 0xC /* user vector exception - brai opcode */
- addik r6, r0, _exception_handler
+ addik r6, r5, _exception_handler
sw r6, r1, r0
/*
* BIG ENDIAN memory map for user exception
*/
lhu r7, r1, r10
rsubi r8, r10, 0xa
- sh r7, r0, r8
+ sh r7, r4, r8
rsubi r8, r10, 0xe
- sh r6, r0, r8
+ sh r6, r4, r8
#endif
/* interrupt_handler */
- swi r2, r0, 0x10 /* interrupt - imm opcode */
- swi r3, r0, 0x14 /* interrupt - brai opcode */
+ swi r2, r4, 0x10 /* interrupt - imm opcode */
+ swi r3, r4, 0x14 /* interrupt - brai opcode */
- addik r6, r0, _interrupt_handler
+ addik r6, r5, _interrupt_handler
sw r6, r1, r0
lhu r7, r1, r10
rsubi r8, r10, 0x12
- sh r7, r0, r8
+ sh r7, r4, r8
rsubi r8, r10, 0x16
- sh r6, r0, r8
+ sh r6, r4, r8
/* hardware exception */
- swi r2, r0, 0x20 /* hardware exception - imm opcode */
- swi r3, r0, 0x24 /* hardware exception - brai opcode */
+ swi r2, r4, 0x20 /* hardware exception - imm opcode */
+ swi r3, r4, 0x24 /* hardware exception - brai opcode */
- addik r6, r0, _hw_exception_handler
+ addik r6, r5, _hw_exception_handler
sw r6, r1, r0
lhu r7, r1, r10
rsubi r8, r10, 0x22
- sh r7, r0, r8
+ sh r7, r4, r8
rsubi r8, r10, 0x26
- sh r6, r0, r8
+ sh r6, r4, r8
- /* Flush cache before enable cache */
- addik r5, r0, 0
- addik r6, r0, XILINX_DCACHE_BYTE_SIZE
-flush: bralid r15, flush_cache
- nop
-
- /* enable instruction and data cache */
- mfs r12, rmsr
- ori r12, r12, 0xa0
- mts rmsr, r12
+ lwi r10, r1, 28
+ lwi r8, r1, 24
+ lwi r7, r1, 20
+ lwi r6, r1, 16
+ lwi r4, r1, 12
+ lwi r3, r1, 8
+ lwi r2, r1, 4
+ addik r1, r1, 32
-clear_bss:
- /* clear BSS segments */
- addi r5, r0, __bss_start
- addi r4, r0, __bss_end
- cmp r6, r5, r4
- beqi r6, 3f
-2:
- swi r0, r5, 0 /* write zero to loc */
- addi r5, r5, 4 /* increment to next loc */
- cmp r6, r5, r4 /* check if we have reach the end */
- bnei r6, 2b
-3: /* jumping to board_init */
- brai board_init_f
-1: bri 1b
+ rtsd r15, 8
+ or r0, r0, r0
+ .end __setup_exceptions
/*
* Read 16bit little endian
rtsd r15, 8
or r0, r0, r0
.end out16
+
+/*
+ * Relocate u-boot
+ */
+ .text
+ .global relocate_code
+ .ent relocate_code
+ .align 2
+relocate_code:
+ /*
+ * r5 - start_addr_sp
+ * r6 - new_gd
+ * r7 - reloc_addr
+ */
+ addi r1, r5, 0 /* Start to use new SP */
+ addi r31, r6, 0 /* Start to use new GD */
+
+ add r23, r0, r7 /* Move reloc addr to r23 */
+ /* Relocate text and data - r12 temp value */
+ addi r21, r0, _start
+ addi r22, r0, _end - 4 /* Include BSS too */
+
+ rsub r6, r21, r22
+ or r5, r0, r0
+1: lw r12, r21, r5 /* Load u-boot data */
+ sw r12, r23, r5 /* Write zero to loc */
+ cmp r12, r5, r6 /* Check if we have reach the end */
+ bneid r12, 1b
+ addi r5, r5, 4 /* Increment to next loc - relocate code */
+
+ /* R23 points to the base address. */
+ add r23, r0, r7 /* Move reloc addr to r23 */
+ addi r24, r0, CONFIG_SYS_TEXT_BASE /* Get reloc offset */
+ rsub r23, r24, r23 /* keep - this is already here gd->reloc_off */
+
+ /* Setup vectors with post-relocation symbols */
+ add r5, r0, r23 /* load gd->reloc_off to r5 */
+ bralid r15, __setup_exceptions
+ nop
+
+ /* Check if GOT exist */
+ addik r21, r23, _got_start
+ addik r22, r23, _got_end
+ cmpu r12, r21, r22
+ beqi r12, 2f /* No GOT table - jump over */
+
+ /* Skip last 3 entries plus 1 because of loop boundary below */
+ addik r22, r22, -0x10
+
+ /* Relocate the GOT. */
+3: lw r12, r21, r0 /* Load entry */
+ addk r12, r12, r23 /* Add reloc offset */
+ sw r12, r21, r0 /* Save entry back */
+
+ cmpu r12, r21, r22 /* Check if this cross boundary */
+ bneid r12, 3b
+ addik r21. r21, 4
+
+ /* Update pointer to GOT */
+ mfs r20, rpc
+ addik r20, r20, _GLOBAL_OFFSET_TABLE_ + 8
+ addk r20, r20, r23
+
+ /* Flush caches to ensure consistency */
+ addik r5, r0, 0
+ addik r6, r0, XILINX_DCACHE_BYTE_SIZE
+ bralid r15, flush_cache
+ nop
+
+2: addi r5, r31, 0 /* gd is initialized in board_r.c */
+ addi r6, r0, CONFIG_SYS_TEXT_BASE
+ addi r12, r23, board_init_r
+ bra r12 /* Jump to relocated code */
+
+ .end relocate_code
+#endif
projects / platform / kernel / u-boot.git / blobdiff