* Michal SIMEK <monstr@monstr.eu>
* Yasushi SHOJI <yashi@atmark-techno.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
+#include <asm-offsets.h>
#include <config.h>
.text
.global _start
_start:
+ /*
+ * reserve registers:
+ * r10: Stores little/big endian offset for vectors
+ * r2: Stores imm opcode
+ * r3: Stores brai opcode
+ */
+
mts rmsr, r0 /* disable cache */
+
+#if defined(CONFIG_SPL_BUILD)
+ addi r1, r0, CONFIG_SPL_STACK_ADDR
+ addi r1, r1, -4 /* Decrement SP to top of memory */
+#else
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
* 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
*/
addik r6, r0, 0x2 /* BIG/LITTLE endian offset */
- swi r6, r0, 0
- lbui r10, r0, 0
- swi r6, r0, 0x40
- swi r10, r0, 0x50
-
- /* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
- addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
- swi r6, r0, 0x0 /* reset address */
- swi r6, r0, 0x8 /* user vector exception */
- swi r6, r0, 0x10 /* interrupt */
- swi r6, r0, 0x20 /* hardware exception */
-
- addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/
- swi r6, r0, 0x4 /* reset address */
- swi r6, r0, 0xC /* user vector exception */
- swi r6, r0, 0x14 /* interrupt */
- swi r6, r0, 0x24 /* hardware exception */
+ lwi r7, r0, 0x28
+ swi r6, r0, 0x28 /* used first unused MB vector */
+ lbui r10, r0, 0x28 /* used first unused MB vector */
+ swi r7, r0, 0x28
+
+ /* add opcode instruction for 32bit jump - 2 instruction imm & brai */
+ addi r2, r0, 0xb0000000 /* hex b000 opcode imm */
+ addi r3, r0, 0xb8080000 /* hew b808 opcode brai */
#ifdef CONFIG_SYS_RESET_ADDRESS
/* reset address */
+ swi r2, r0, 0x0 /* reset address - imm opcode */
+ swi r3, r0, 0x4 /* reset address - brai opcode */
+
addik r6, r0, CONFIG_SYS_RESET_ADDRESS
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0x2
- shi r6, r0, 0x6
-/*
- * Copy U-Boot code to TEXT_BASE
- * solve problem with sbrk_base
- */
-#if (CONFIG_SYS_RESET_ADDRESS != TEXT_BASE)
- addi r4, r0, __end
- addi r5, r0, __text_start
- rsub r4, r5, r4 /* size = __end - __text_start */
- addi r6, r0, CONFIG_SYS_RESET_ADDRESS /* source address */
- addi r7, r0, 0 /* counter */
-4:
- lw r8, r6, r7
- sw r8, r5, r7
- addi r7, r7, 0x4
- cmp r8, r4, r7
- blti r8, 4b
-#endif
+ lhu r7, r1, r10
+ rsubi r8, r10, 0x2
+ sh r7, r0, r8
+ rsubi r8, r10, 0x6
+ sh r6, r0, r8
#endif
#ifdef CONFIG_SYS_USR_EXCEP
/* user_vector_exception */
+ swi r2, r0, 0x8 /* user vector exception - imm opcode */
+ swi r3, r0, 0xC /* user vector exception - brai opcode */
+
addik r6, r0, _exception_handler
sw r6, r1, r0
/*
* 0xC: 0xB808XXXX
*
* then it is necessary to count address for storing the most significant
- * 16bits from _exception_handler address and copy it to
+ * 16bits from _exception_handler address and copy it to
* 0xa address. Big endian use offset in r10=0 that's why is it just
* 0xa address. The same is done for the least significant 16 bits
* for 0xe address.
sh r6, r0, r8
#endif
-#ifdef CONFIG_SYS_INTC_0
/* interrupt_handler */
+ swi r2, r0, 0x10 /* interrupt - imm opcode */
+ swi r3, r0, 0x14 /* interrupt - brai opcode */
+
addik r6, r0, _interrupt_handler
sw r6, r1, r0
lhu r7, r1, r10
sh r7, r0, r8
rsubi r8, r10, 0x16
sh r6, r0, r8
-#endif
/* hardware exception */
+ swi r2, r0, 0x20 /* hardware exception - imm opcode */
+ swi r3, r0, 0x24 /* hardware exception - brai opcode */
+
addik r6, r0, _hw_exception_handler
sw r6, r1, r0
lhu r7, r1, r10
sh r7, r0, r8
rsubi r8, r10, 0x26
sh r6, r0, r8
+#endif /* BUILD_SPL */
+
+ /* Flush cache before enable cache */
+ addik r5, r0, 0
+ addik r6, r0, XILINX_DCACHE_BYTE_SIZE
+flush: bralid r15, flush_cache
+ nop
/* enable instruction and data cache */
mfs r12, rmsr
cmp r6, r5, r4 /* check if we have reach the end */
bnei r6, 2b
3: /* jumping to board_init */
- brai board_init
+#ifndef CONFIG_SPL_BUILD
+ brai board_init_f
+#else
+ brai board_init_r
+#endif
1: bri 1b
+#ifndef CONFIG_SPL_BUILD
/*
* Read 16bit little endian
*/
rtsd r15, 8
or r0, r0, r0
.end out16
+#endif