config SYS_CONFIG_NAME
default "uniphier"
+config ARCH_UNIPHIER_32BIT
+ bool
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select ARMV7_NONSEC
+ select ARCH_SUPPORT_PSCI
+
choice
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_PRO4
config ARCH_UNIPHIER_SLD3
- bool "UniPhier PH1-sLD3 SoC"
- select CPU_V7
+ bool "UniPhier sLD3 SoC"
+ select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_LD4_SLD8
- bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
- select CPU_V7
+ bool "UniPhier LD4/sLD8 SoCs"
+ select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO4
- bool "UniPhier PH1-Pro4 SoC"
- select CPU_V7
+ bool "UniPhier Pro4 SoC"
+ select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO5_PXS2_LD6B
- bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
- select CPU_V7
+ bool "UniPhier Pro5/PXs2/LD6b SoCs"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_LD11
- bool "UniPhier PH1-LD11 SoC"
+config ARCH_UNIPHIER_V8_MULTI
+ bool "UniPhier V8 SoCs"
+ depends on !SPL
select ARM64
- select SPL_SEPARATE_BSS
-
-config ARCH_UNIPHIER_LD20
- bool "UniPhier PH1-LD20 SoC"
- select ARM64
- select SPL_SEPARATE_BSS
+ select CMD_UNZIP
endchoice
config ARCH_UNIPHIER_LD4
- bool "Enable UniPhier PH1-LD4 SoC support"
+ bool "Enable UniPhier LD4 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_SLD8
- bool "Enable UniPhier PH1-sLD8 SoC support"
+ bool "Enable UniPhier sLD8 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_PRO5
- bool "Enable UniPhier PH1-Pro5 SoC support"
+ bool "Enable UniPhier Pro5 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_PXS2
- bool "Enable UniPhier ProXstream2 SoC support"
+ bool "Enable UniPhier Pxs2 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_LD6B
- bool "Enable UniPhier PH1-LD6b SoC support"
+ bool "Enable UniPhier LD6b SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
+config ARCH_UNIPHIER_LD11
+ bool "Enable UniPhier LD11 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config ARCH_UNIPHIER_LD20
+ bool "Enable UniPhier LD20 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ select OF_BOARD_SETUP
+ default y
+
+config ARCH_UNIPHIER_PXS3
+ bool "Enable UniPhier PXs3 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier L2 cache controller"
+ depends on ARCH_UNIPHIER_32BIT
+ select SYS_CACHE_SHIFT_7
+ default y
+ help
+ This option allows to use the UniPhier System Cache as L2 cache.
+
config MICRO_SUPPORT_CARD
bool "Use Micro Support Card"
help
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
- depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+ depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+ ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
default y
help
The command "ddrphy" shows the resulting parameters of DDR PHY