if ARCH_UNIPHIER
-config SPL_LIBCOMMON_SUPPORT
- default y
-
-config SPL_LIBGENERIC_SUPPORT
- default y
-
-config SPL_MMC_SUPPORT
- default y if !ARCH_UNIPHIER_64BIT
-
-config SPL_NAND_SUPPORT
- default y if !ARM64
-
-config SPL_SERIAL_SUPPORT
- default y
-
config SYS_CONFIG_NAME
default "uniphier"
select ARMV7_NONSEC
select ARCH_SUPPORT_PSCI
-config ARCH_UNIPHIER_64BIT
- bool
- select ARM64
- select SPL_SEPARATE_BSS
- select ARMV8_MULTIENTRY
- select ARMV8_SPIN_TABLE
-
choice
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_PRO4
config ARCH_UNIPHIER_SLD3
- bool "UniPhier PH1-sLD3 SoC"
+ bool "UniPhier sLD3 SoC"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_LD4_SLD8
- bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+ bool "UniPhier LD4/sLD8 SoCs"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO4
- bool "UniPhier PH1-Pro4 SoC"
+ bool "UniPhier Pro4 SoC"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO5_PXS2_LD6B
- bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
+ bool "UniPhier Pro5/PXs2/LD6b SoCs"
select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_LD11
- bool "UniPhier PH1-LD11 SoC"
- select ARCH_UNIPHIER_64BIT
-
-config ARCH_UNIPHIER_LD20
- bool "UniPhier PH1-LD20 SoC"
- select ARCH_UNIPHIER_64BIT
- select OF_BOARD_SETUP
+config ARCH_UNIPHIER_V8_MULTI
+ bool "UniPhier V8 SoCs"
+ depends on !SPL
+ select ARM64
+ select CMD_UNZIP
endchoice
config ARCH_UNIPHIER_LD4
- bool "Enable UniPhier PH1-LD4 SoC support"
+ bool "Enable UniPhier LD4 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_SLD8
- bool "Enable UniPhier PH1-sLD8 SoC support"
+ bool "Enable UniPhier sLD8 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_PRO5
- bool "Enable UniPhier PH1-Pro5 SoC support"
+ bool "Enable UniPhier Pro5 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_PXS2
- bool "Enable UniPhier ProXstream2 SoC support"
+ bool "Enable UniPhier Pxs2 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_LD6B
- bool "Enable UniPhier PH1-LD6b SoC support"
+ bool "Enable UniPhier LD6b SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
+config ARCH_UNIPHIER_LD11
+ bool "Enable UniPhier LD11 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config ARCH_UNIPHIER_LD20
+ bool "Enable UniPhier LD20 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ select OF_BOARD_SETUP
+ default y
+
+config ARCH_UNIPHIER_PXS3
+ bool "Enable UniPhier PXs3 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
config CACHE_UNIPHIER
bool "Enable the UniPhier L2 cache controller"
depends on ARCH_UNIPHIER_32BIT
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
- depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+ depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+ ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
default y
help
The command "ddrphy" shows the resulting parameters of DDR PHY