config SYS_CONFIG_NAME
default "uniphier"
-config ARCH_UNIPHIER_PH1_SLD3
- bool "UniPhier PH1-sLD3 SoC"
- help
- This enables support for UniPhier PH1-sLD3 SoC.
+config ARCH_UNIPHIER_32BIT
+ bool
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select ARMV7_NONSEC
+ select ARCH_SUPPORT_PSCI
-config ARCH_UNIPHIER_PH1_LD4
- bool "UniPhier PH1-LD4 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3
- help
- This enables support for UniPhier PH1-LD4 SoC.
+choice
+ prompt "UniPhier SoC select"
+ default ARCH_UNIPHIER_PRO4
-config ARCH_UNIPHIER_PH1_PRO4
- bool "UniPhier PH1-Pro4 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3 && \
- !ARCH_UNIPHIER_PH1_LD4 && \
- !ARCH_UNIPHIER_PH1_SLD8
- help
- This enables support for UniPhier PH1-Pro4 SoC.
+config ARCH_UNIPHIER_SLD3
+ bool "UniPhier sLD3 SoC"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PH1_SLD8
- bool "UniPhier PH1-sLD8 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3
- help
- This enables support for UniPhier PH1-sLD8 SoC.
+config ARCH_UNIPHIER_LD4_SLD8
+ bool "UniPhier LD4/sLD8 SoCs"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PH1_PRO5
- bool "UniPhier PH1-Pro5 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3 && \
- !ARCH_UNIPHIER_PH1_LD4 && \
- !ARCH_UNIPHIER_PH1_SLD8
- help
- This enables support for UniPhier PH1-Pro5 SoC.
+config ARCH_UNIPHIER_PRO4
+ bool "UniPhier Pro4 SoC"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PROXSTREAM2
- bool "UniPhier ProXstream2 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3 && \
- !ARCH_UNIPHIER_PH1_LD4 && \
- !ARCH_UNIPHIER_PH1_SLD8
- help
- This enables support for UniPhier ProXstream2 SoC.
+config ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ bool "UniPhier Pro5/PXs2/LD6b SoCs"
+ select ARCH_UNIPHIER_32BIT
+
+config ARCH_UNIPHIER_V8_MULTI
+ bool "UniPhier V8 SoCs"
+ depends on !SPL
+ select ARM64
+ select CMD_UNZIP
+
+endchoice
+
+config ARCH_UNIPHIER_LD4
+ bool "Enable UniPhier LD4 SoC support"
+ depends on ARCH_UNIPHIER_LD4_SLD8
+ default y
+
+config ARCH_UNIPHIER_SLD8
+ bool "Enable UniPhier sLD8 SoC support"
+ depends on ARCH_UNIPHIER_LD4_SLD8
+ default y
+
+config ARCH_UNIPHIER_PRO5
+ bool "Enable UniPhier Pro5 SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
-config ARCH_UNIPHIER_PH1_LD6B
- bool "UniPhier PH1-LD6b SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3 && \
- !ARCH_UNIPHIER_PH1_LD4 && \
- !ARCH_UNIPHIER_PH1_SLD8
+config ARCH_UNIPHIER_PXS2
+ bool "Enable UniPhier Pxs2 SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
+
+config ARCH_UNIPHIER_LD6B
+ bool "Enable UniPhier LD6b SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
+
+config ARCH_UNIPHIER_LD11
+ bool "Enable UniPhier LD11 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config ARCH_UNIPHIER_LD20
+ bool "Enable UniPhier LD20 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ select OF_BOARD_SETUP
+ default y
+
+config ARCH_UNIPHIER_PXS3
+ bool "Enable UniPhier PXs3 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier L2 cache controller"
+ depends on ARCH_UNIPHIER_32BIT
+ select SYS_CACHE_SHIFT_7
+ default y
help
- This enables support for UniPhier PH1-LD6b SoC.
+ This option allows to use the UniPhier System Cache as L2 cache.
config MICRO_SUPPORT_CARD
bool "Use Micro Support Card"
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
- depends on ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4 || \
- ARCH_UNIPHIER_PH1_SLD8
+ depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+ ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
+ default y
help
The command "ddrphy" shows the resulting parameters of DDR PHY
training; it is useful for the evaluation of DDR PHY training.
config CMD_DDRMPHY_DUMP
bool "Enable dump command of DDR Multi PHY parameters"
- depends on ARCH_UNIPHIER_PROXSTREAM2 || ARCH_UNIPHIER_PH1_LD6B
+ depends on ARCH_UNIPHIER_PXS2 || ARCH_UNIPHIER_LD6B
+ default y
help
The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
training; it is useful for the evaluation of DDR Multi PHY training.