*/
struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
/*
- * T124: same as T114, some deviations from T2x/T30.
+ * T124: same as T114, some deviations from T2x/T30. Adds PLLDP.
* NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
* If lock_ena or lock_det are >31, they're not used in that PLL.
*/
.lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */
{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLS (RESERVED) */
+ { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0xF,
+ .lock_ena = 30, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLDP */
};
/*
}
}
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
+{
+ enum periphc_internal_id internal_id;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
+
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
+
+ *mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+ if (*type == CLOCK_TYPE_PC2CC3M_T16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
-
- internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
+ int mux, err;
- *mux_bits = clock_source[type][CLOCK_MAX_MUX];
-
- if (type == CLOCK_TYPE_PC2CC3M_T16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
writel(reg, reset);
}
-#ifdef CONFIG_OF_CONTROL
+#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
return clk_id;
}
}
-#endif /* CONFIG_OF_CONTROL */
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{
tegra30_set_up_pllp();
+ /* clear IDDQ before accessing any other PLLC registers */
+ pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+ clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ);
+ udelay(2);
+
/*
* PLLC output frequency set to 600Mhz
* PLLD output frequency set to 925Mhz
udelay(2);
}
+/*
+ * clock_early_init_done - Check if clock_early_init() has been called
+ *
+ * Check a register that we set up to see if clock_early_init() has already
+ * been called.
+ *
+ * @return true if clock_early_init() was called, false if not
+ */
+bool clock_early_init_done(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 val;
+
+ val = readl(&clkrst->crc_sclk_brst_pol);
+
+ return val == 0x20002222;
+}
+
void arch_timer_init(void)
{
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
u32 freq, val;
- freq = clock_get_rate(CLOCK_ID_OSC);
- debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
+ freq = clock_get_rate(CLOCK_ID_CLK_M);
+ debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
/* ARM CNTFRQ */
asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
return NULL;
}
+
+struct periph_clk_init periph_clk_init_table[] = {
+ { PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
+ { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+ { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
+ { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+ { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+ { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+ { PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+ { PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+ { PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+ { PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
+ { PERIPH_ID_I2C5, CLOCK_ID_PERIPH },
+ { PERIPH_ID_I2C6, CLOCK_ID_PERIPH },
+ { -1, },
+};
projects / platform / kernel / u-boot.git / blobdiff