Merge tag 'efi-2020-01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

[platform/kernel/u-boot.git] / arch / arm / mach-sunxi / board.c

diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index ac456ca..db50636 100644 (file)
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
  *
@@ -6,8 +7,6 @@
  * Tom Cubie <tangliang@allwinnertech.com>
  *
  * Some init for sunxi platform.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -53,7 +52,7 @@ static struct mm_region sunxi_mem_map[] = {
                /* RAM */
                .virt = 0x40000000UL,
                .phys = 0x40000000UL,
-               .size = 0x80000000UL,
+               .size = 0xC0000000UL,
                .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
                         PTE_BLOCK_INNER_SHARE
        }, {
@@ -66,6 +65,7 @@ struct mm_region *mem_map = sunxi_mem_map;
 
 static int gpio_init(void)
 {
+       __maybe_unused uint val;
 #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
 #if defined(CONFIG_MACH_SUN4I) || \
     defined(CONFIG_MACH_SUN7I) || \
@@ -108,6 +108,10 @@ static int gpio_init(void)
        sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0);
        sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H6)
+       sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0);
+       sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0);
+       sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
        sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
@@ -136,6 +140,14 @@ static int gpio_init(void)
 #error Unsupported console port number. Please fix pin mux settings in board.c
 #endif
 
+#ifdef CONFIG_MACH_SUN50I_H6
+       /* Update PIO power bias configuration by copy hardware detected value */
+       val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+       writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+       val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+       writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+#endif
+
        return 0;
 }
 
@@ -208,9 +220,6 @@ void s_init(void)
        eth_init_board();
 }
 
-#ifdef CONFIG_SPL_BUILD
-#endif
-
 /* The sunxi internal brom will try to loader external bootloader
  * from mmc0, nand flash, mmc2.
  */
@@ -240,10 +249,12 @@ uint32_t sunxi_get_boot_device(void)
        boot_source = readb(SPL_ADDR + 0x28);
        switch (boot_source) {
        case SUNXI_BOOTED_FROM_MMC0:
+       case SUNXI_BOOTED_FROM_MMC0_HIGH:
                return BOOT_DEVICE_MMC1;
        case SUNXI_BOOTED_FROM_NAND:
                return BOOT_DEVICE_NAND;
        case SUNXI_BOOTED_FROM_MMC2:
+       case SUNXI_BOOTED_FROM_MMC2_HIGH:
                return BOOT_DEVICE_MMC2;
        case SUNXI_BOOTED_FROM_SPI:
                return BOOT_DEVICE_SPI;
@@ -286,10 +297,15 @@ void reset_cpu(ulong addr)
                /* sun5i sometimes gets stuck without this */
                writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
        }
-#elif defined(CONFIG_SUNXI_GEN_SUN6I)
+#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_MACH_SUN50I_H6)
+       /* WDOG is broken for some H6 rev. use the R_WDOG instead */
        static const struct sunxi_wdog *wdog =
-                ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
+               (struct sunxi_wdog *)SUNXI_R_WDOG_BASE;
+#else
+       static const struct sunxi_wdog *wdog =
+               ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+#endif
        /* Set the watchdog for its shortest interval (.5s) and wait */
        writel(WDT_CFG_RESET, &wdog->cfg);
        writel(WDT_MODE_EN, &wdog->mode);
@@ -298,7 +314,7 @@ void reset_cpu(ulong addr)
 #endif
 }
 
-#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
 void enable_caches(void)
 {
        /* Enable D-cache. I-cache is already enabled in start.S */