Select this dram controller driver for Sun8i platforms,
for A23 SOC.
+config DRAM_SUN8I_A33
+ bool
+ help
+ Select this dram controller driver for Sun8i platforms,
+ for A33 SOC.
+
+config DRAM_SUN8I_A83T
+ bool
+ help
+ Select this dram controller driver for Sun8i platforms,
+ for A83T SOC.
+
config DRAM_SUN9I
bool
help
Select this dram controller driver for Sun9i platforms,
like A80.
+config DRAM_SUN50I_H6
+ bool
+ help
+ Select this dram controller driver for some sun50i platforms,
+ like H6.
+
config SUN6I_P2WI
bool "Allwinner sun6i internal P2WI controller"
help
with various RSB based devices, such as AXP223, AXP8XX PMICs,
and AC100/AC200 ICs.
-config SUNXI_HIGH_SRAM
- bool
- default n
+config SUNXI_SRAM_ADDRESS
+ hex
+ default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
+ default 0x20000 if MACH_SUN50I_H6
+ default 0x0
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
with the first SRAM region being located at address 0.
Some newer SoCs map the boot ROM at address 0 instead and move the
- SRAM to 64KB, just behind the mask ROM.
- Chips using the latter setup are supposed to select this option to
- adjust the addresses accordingly.
+ SRAM to a different address.
+
+config SUNXI_A64_TIMER_ERRATUM
+ bool
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
config MACH_SUNXI_H3_H5
bool
select DM_I2C
+ select PHY_SUN4I_USB
select SUNXI_DE2
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
+# TODO: try out A80's 8GiB DRAM space
+config SUNXI_DRAM_MAX_SIZE
+ hex
+ default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
+ default 0x80000000
+
choice
prompt "Sunxi SoC Variant"
optional
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
- select CPU_V7
+ select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
+ select DM_MMC if MMC
+ select DM_SCSI if SCSI
+ select PHY_SUN4I_USB
select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
- select CPU_V7
+ select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
select DRAM_SUN4I
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
imply CONS_INDEX_2 if !DM_SERIAL
config MACH_SUN6I
bool "sun6i (Allwinner A31)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN6I
+ select PHY_SUN4I_USB
select SUN6I_P2WI
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
config MACH_SUN7I
bool "sun7i (Allwinner A20)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN4I
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN8I_A23
bool "sun8i (Allwinner A23)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A23
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN8I_A33
bool "sun8i (Allwinner A33)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DRAM_SUN8I_A33
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
- select CPU_V7
+ select CPU_V7A
+ select DRAM_SUN8I_A83T
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
+ select MMC_SUNXI_HAS_MODE_SWITCH
select SUPPORT_SPL
config MACH_SUN8I_H3
bool "sun8i (Allwinner H3)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
config MACH_SUN8I_R40
bool "sun8i (Allwinner R40)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
config MACH_SUN8I_V3S
bool "sun8i (Allwinner V3s)"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
- select CPU_V7
+ select CPU_V7A
select DRAM_SUN9I
select SUN6I_PRCM
- select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
select SUN8I_RSB
select SUPPORT_SPL
bool "sun50i (Allwinner A64)"
select ARM64
select DM_I2C
+ select PHY_SUN4I_USB
+ select SUN6I_PRCM
select SUNXI_DE2
select SUNXI_GEN_SUN6I
- select SUNXI_HIGH_SRAM
+ select MMC_SUNXI_HAS_NEW_MODE
select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
select FIT
select SPL_LOAD_FIT
+ select SUNXI_A64_TIMER_ERRATUM
config MACH_SUN50I_H5
bool "sun50i (Allwinner H5)"
select ARM64
select MACH_SUNXI_H3_H5
- select SUNXI_HIGH_SRAM
select FIT
select SPL_LOAD_FIT
+config MACH_SUN50I_H6
+ bool "sun50i (Allwinner H6)"
+ select ARM64
+ select SUPPORT_SPL
+ select FIT
+ select SPL_LOAD_FIT
+ select DRAM_SUN50I_H6
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
MACH_SUN8I_V3S
default 672 if MACH_SUN50I
+ default 744 if MACH_SUN50I_H6
---help---
Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
must be a multiple of 24. For the sun9i (A80), the tested values
default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default 127 if MACH_SUN7I
default 14779 if MACH_SUN8I_V3S
- default 3881979 if MACH_SUN8I_R40
+ default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6
default 4145117 if MACH_SUN9I
default 3881915 if MACH_SUN50I
---help---
config DRAM_ODT_EN
bool "sunxi dram odt enable"
- default n if !MACH_SUN8I_A23
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_R40
default y if MACH_SUN50I
+ default y if MACH_SUN50I_H6
---help---
Select this to enable dram odt (on die termination).
default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
default 1008000000 if MACH_SUN8I
default 1008000000 if MACH_SUN9I
+ default 888000000 if MACH_SUN50I_H6
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
+ default "sun50i" if MACH_SUN50I_H6
config SYS_BOARD
default "sunxi"
depends on !MACH_SUN8I_V3S
depends on !MACH_SUN9I
depends on !MACH_SUN50I
+ depends on !MACH_SUN50I_H6
select VIDEO
imply VIDEO_DT_SIMPLEFB
default y
default 0x4fe00000 if MACH_SUN8I
default 0x2fe00000 if MACH_SUN9I
default 0x4fe00000 if MACH_SUN50I
+ default 0x4fe00000 if MACH_SUN50I_H6
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
sunxi SPI Flash. It uses the same method as the boot ROM, so does
not need any extra configuration.
+config PINE64_DT_SELECTION
+ bool "Enable Pine64 device tree selection code"
+ depends on MACH_SUN50I
+ help
+ The original Pine A64 and Pine A64+ are similar but different
+ boards and can be differed by the DRAM size. Pine A64 has
+ 512MiB DRAM, and Pine A64+ has 1GiB or 2GiB. By selecting this
+ option, the device tree selection code specific to Pine64 which
+ utilizes the DRAM size will be enabled.
+
endif