stm32mp: remove redundant SYS_TEXT_BASE prompt

[platform/kernel/u-boot.git] / arch / arm / mach-stm32mp / Kconfig

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index abceede..bf8a18a 100644 (file)
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -5,6 +5,7 @@ config SPL
        select SPL_CLK
        select SPL_DM
        select SPL_DM_SEQ_ALIAS
+       select SPL_DRIVERS_MISC_SUPPORT
        select SPL_FRAMEWORK
        select SPL_GPIO_SUPPORT
        select SPL_LIBCOMMON_SUPPORT
@@ -13,36 +14,76 @@ config SPL
        select SPL_OF_TRANSLATE
        select SPL_PINCTRL
        select SPL_REGMAP
-       select SPL_RESET_SUPPORT
+       select SPL_DM_RESET
        select SPL_SERIAL_SUPPORT
+       select SPL_SPI_LOAD
        select SPL_SYSCON
-       select SPL_DRIVERS_MISC_SUPPORT
+       select SPL_WATCHDOG_SUPPORT if WATCHDOG
+       imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
+       imply SPL_BOOTSTAGE if BOOTSTAGE
+       imply SPL_DISPLAY_PRINT
        imply SPL_LIBDISK_SUPPORT
 
 config SYS_SOC
        default "stm32mp"
 
+config SYS_MALLOC_LEN
+       default 0x2000000
+
+config ENV_SIZE
+       default 0x2000
+
 config TARGET_STM32MP1
        bool "Support stm32mp1xx"
-       select ARCH_SUPPORT_PSCI
+       select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
        select CPU_V7A
-       select CPU_V7_HAS_NONSEC
+       select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
        select CPU_V7_HAS_VIRT
+       select OF_BOARD_SETUP
        select PINCTRL_STM32
+       select STM32_RCC
        select STM32_RESET
+       select STM32_SERIAL
        select SYS_ARCH_TIMER
-       select SYSRESET_SYSCON
+       imply BOOTCOUNT_LIMIT
+       imply CMD_BOOTCOUNT
+       imply CMD_CLS if CMD_BMP
+       imply DISABLE_CONSOLE
+       imply PRE_CONSOLE_BUFFER
+       imply SILENT_CONSOLE
+       imply SYSRESET_PSCI if STM32MP1_TRUSTED
+       imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
        help
                target STMicroelectronics SOC STM32MP1 family
+               STM32MP157, STM32MP153 or STM32MP151
                STMicroelectronics MPU with core ARMv7
+               dual core A7 for STM32MP157/3, monocore for STM32MP151
+
+config STM32MP1_TRUSTED
+       bool "Support trusted boot with TF-A"
+       default y if !SPL
+       select ARM_SMCCC
+       help
+               Say Y here to enable boot with TF-A
+               Trusted boot chain is :
+               BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
+               TF-A monitor provides proprietary SMC to manage secure devices
+
+config STM32MP1_OPTEE
+       bool "Support trusted boot with TF-A and OP-TEE"
+       depends on STM32MP1_TRUSTED
+       default n
+       help
+               Say Y here to enable boot with TF-A and OP-TEE
+               Trusted boot chain is :
+               BootRom => TF-A.stm32 (clock & DDR) => OP-TEE => U-Boot.stm32
+               OP-TEE monitor provides ST SMC to access to secure resources
 
 config SYS_TEXT_BASE
-       prompt "U-Boot base address"
        default 0xC0100000
-       help
-               configure the U-Boot base address
-               when DDR driver is used:
-                 DDR + 1MB (0xC0100000)
+
+config NR_DRAM_BANKS
+       default 1
 
 config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
        hex "Partition on MMC2 to use to load U-Boot from"
@@ -52,9 +93,40 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
          Partition on the second MMC to load U-Boot from when the MMC is being
          used in raw mode
 
-source "board/st/stm32mp1/Kconfig"
+config STM32_ETZPC
+       bool "STM32 Extended TrustZone Protection"
+       depends on TARGET_STM32MP1
+       default y
+       help
+         Say y to enable STM32 Extended TrustZone Protection
+
+config CMD_STM32KEY
+       bool "command stm32key to fuse public key hash"
+       default y
+       depends on CMD_FUSE
+       help
+               fuse public key hash in corresponding fuse used to authenticate
+               binary.
+
+
+config PRE_CON_BUF_ADDR
+       default 0xC02FF000
+
+config PRE_CON_BUF_SZ
+       default 4096
+
+config BOOTSTAGE_STASH_ADDR
+       default 0xC3000000
+
+if BOOTCOUNT_LIMIT
+config SYS_BOOTCOUNT_SINGLEWORD
+       default y
+
+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
+config SYS_BOOTCOUNT_ADDR
+       default 0x5C00A154
+endif
 
-# currently activated for debug / should be deactivated for real product
 if DEBUG_UART
 
 config DEBUG_UART_BOARD_INIT
@@ -69,4 +141,6 @@ config DEBUG_UART_CLOCK
        default 64000000
 endif
 
+source "board/st/stm32mp1/Kconfig"
+
 endif