*
*/
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <image.h>
#include <spl.h>
#include <asm/arch/clock_manager.h>
-#include <asm/arch/firewall_s10.h>
+#include <asm/arch/firewall.h>
#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/misc.h>
#include <asm/arch/reset_manager.h>
-#include <asm/arch/sdram_s10.h>
#include <asm/arch/system_manager.h>
#include <watchdog.h>
+#include <dm/uclass.h>
DECLARE_GLOBAL_DATA_PTR;
-static struct socfpga_system_manager *sysmgr_regs =
- (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-
u32 spl_boot_device(void)
{
/* TODO: Get from SDM or handoff */
}
#ifdef CONFIG_SPL_MMC_SUPPORT
-u32 spl_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(const u32 boot_device)
{
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
}
#endif
-void spl_disable_firewall_l4_per(void)
-{
- const struct socfpga_firwall_l4_per *firwall_l4_per_base =
- (struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
- u32 i;
- const u32 *addr[] = {
- &firwall_l4_per_base->nand,
- &firwall_l4_per_base->nand_data,
- &firwall_l4_per_base->usb0,
- &firwall_l4_per_base->usb1,
- &firwall_l4_per_base->spim0,
- &firwall_l4_per_base->spim1,
- &firwall_l4_per_base->emac0,
- &firwall_l4_per_base->emac1,
- &firwall_l4_per_base->emac2,
- &firwall_l4_per_base->sdmmc,
- &firwall_l4_per_base->gpio0,
- &firwall_l4_per_base->gpio1,
- &firwall_l4_per_base->i2c0,
- &firwall_l4_per_base->i2c1,
- &firwall_l4_per_base->i2c2,
- &firwall_l4_per_base->i2c3,
- &firwall_l4_per_base->i2c4,
- &firwall_l4_per_base->timer0,
- &firwall_l4_per_base->timer1,
- &firwall_l4_per_base->uart0,
- &firwall_l4_per_base->uart1
- };
-
- /*
- * The following lines of code will enable non-secure access
- * to nand, usb, spi, emac, sdmmc, gpio, i2c, timers and uart. This
- * is needed as most OS run in non-secure mode. Thus we need to
- * enable non-secure access to these peripherals in order for the
- * OS to use these peripherals.
- */
- for (i = 0; i < ARRAY_SIZE(addr); i++)
- writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
-}
-
-void spl_disable_firewall_l4_sys(void)
-{
- const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
- (struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
- u32 i;
- const u32 *addr[] = {
- &firwall_l4_sys_base->dma_ecc,
- &firwall_l4_sys_base->emac0rx_ecc,
- &firwall_l4_sys_base->emac0tx_ecc,
- &firwall_l4_sys_base->emac1rx_ecc,
- &firwall_l4_sys_base->emac1tx_ecc,
- &firwall_l4_sys_base->emac2rx_ecc,
- &firwall_l4_sys_base->emac2tx_ecc,
- &firwall_l4_sys_base->nand_ecc,
- &firwall_l4_sys_base->nand_read_ecc,
- &firwall_l4_sys_base->nand_write_ecc,
- &firwall_l4_sys_base->ocram_ecc,
- &firwall_l4_sys_base->sdmmc_ecc,
- &firwall_l4_sys_base->usb0_ecc,
- &firwall_l4_sys_base->usb1_ecc,
- &firwall_l4_sys_base->clock_manager,
- &firwall_l4_sys_base->io_manager,
- &firwall_l4_sys_base->reset_manager,
- &firwall_l4_sys_base->system_manager,
- &firwall_l4_sys_base->watchdog0,
- &firwall_l4_sys_base->watchdog1,
- &firwall_l4_sys_base->watchdog2,
- &firwall_l4_sys_base->watchdog3
- };
-
- for (i = 0; i < ARRAY_SIZE(addr); i++)
- writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
-}
-
void board_init_f(ulong dummy)
{
const struct cm_config *cm_default_cfg = cm_get_default_config();
int ret;
-#ifdef CONFIG_HW_WATCHDOG
+ ret = spl_early_init();
+ if (ret)
+ hang();
+
+ socfpga_get_managers_addr();
+
/* Ensure watchdog is paused when debugging is happening */
- writel(SYSMGR_WDDBG_PAUSE_ALL_CPU, &sysmgr_regs->wddbg);
+ writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
+ socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
+#ifdef CONFIG_HW_WATCHDOG
/* Enable watchdog before initializing the HW */
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
debug_uart_init();
#endif
- ret = spl_early_init();
- if (ret) {
- debug("spl_early_init() failed: %d\n", ret);
- hang();
- }
preloader_console_init();
+ print_reset_info();
cm_print_clock_quick_summary();
- /* enable non-secure interface to DMA330 DMA and peripherals */
- writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS, &sysmgr_regs->dma);
- writel(SYSMGR_DMAPERIPH_ALL_NS, &sysmgr_regs->dma_periph);
-
- spl_disable_firewall_l4_per();
-
- spl_disable_firewall_l4_sys();
-
- /* disable lwsocf2fpga and soc2fpga bridge security */
- writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
- writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
-
- /* disable SMMU security */
- writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU);
+ firewall_setup();
/* disable ocram security at CCU for non secure access */
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADMASK_MEM_RAM0),
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADMASK_MEM_RAM0),
CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
- debug("DDR: Initializing Hard Memory Controller\n");
- if (sdram_mmr_init_full(0)) {
- puts("DDR: Initialization failed.\n");
- hang();
- }
-
- gd->ram_size = sdram_calculate_size();
- printf("DDR: %d MiB\n", (int)(gd->ram_size >> 20));
+#if CONFIG_IS_ENABLED(ALTERA_SDRAM)
+ struct udevice *dev;
- /* Sanity check ensure correct SDRAM size specified */
- debug("DDR: Running SDRAM size sanity check\n");
- if (get_ram_size(0, gd->ram_size) != gd->ram_size) {
- puts("DDR: SDRAM size check failed!\n");
- hang();
- }
- debug("DDR: SDRAM size check passed!\n");
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ hang();
+ }
+#endif
mbox_init();