* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/of_platform.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7790.h>
+#include <linux/platform_data/rcar-du.h>
+
#include <asm/mach/arch.h>
-static void __init lager_add_standard_devices(void)
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+ {
+ .type = RCAR_DU_ENCODER_VGA,
+ .output = RCAR_DU_OUTPUT_DPAD0,
+ }, {
+ .type = RCAR_DU_ENCODER_NONE,
+ .output = RCAR_DU_OUTPUT_LVDS1,
+ .connector.lvds.panel = {
+ .width_mm = 210,
+ .height_mm = 158,
+ .mode = {
+ .pixelclock = 65000000,
+ .hactive = 1024,
+ .hfront_porch = 20,
+ .hback_porch = 160,
+ .hsync_len = 136,
+ .vactive = 768,
+ .vfront_porch = 3,
+ .vback_porch = 29,
+ .vsync_len = 6,
+ },
+ },
+ },
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+ .encoders = lager_du_encoders,
+ .num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+ DEFINE_RES_MEM(0xfeb00000, 0x70000),
+ DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+ DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+ DEFINE_RES_IRQ(gic_spi(256)),
+ DEFINE_RES_IRQ(gic_spi(268)),
+ DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
{
-#ifdef CONFIG_COMMON_CLK
- /*
- * This is a really crude hack to provide clkdev support to the SCIF
- * and CMT devices until they get moved to DT.
- */
- static const char * const scif_names[] = {
- "scifa0", "scifa1", "scifb0", "scifb1",
- "scifb2", "scifa2", "scif0", "scif1",
- "hscif0", "hscif1",
+ struct platform_device_info info = {
+ .name = "rcar-du-r8a7790",
+ .id = -1,
+ .res = du_resources,
+ .num_res = ARRAY_SIZE(du_resources),
+ .data = &lager_du_pdata,
+ .size_data = sizeof(lager_du_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
};
- struct clk *clk;
- unsigned int i;
- for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
- clk = clk_get(NULL, scif_names[i]);
- if (clk) {
- clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
- clk_put(clk);
- }
- }
+ platform_device_register_full(&info);
+}
- clk = clk_get(NULL, "cmt0");
- if (clk) {
- clk_register_clkdev(clk, NULL, "sh_cmt.0");
- clk_put(clk);
- }
-#else
- r8a7790_clock_init();
-#endif
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+ { "du0", "du.0", "rcar-du-r8a7790" },
+ { "du1", "du.1", "rcar-du-r8a7790" },
+ { "du2", "du.2", "rcar-du-r8a7790" },
+ { "lvds0", "lvds.0", "rcar-du-r8a7790" },
+ { "lvds1", "lvds.1", "rcar-du-r8a7790" },
+};
- r8a7790_add_dt_devices();
+static void __init lager_add_standard_devices(void)
+{
+ shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ lager_add_du_device();
}
static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
.dt_compat = lager_boards_compat_dt,
MACHINE_END