rockchip: rk3399: add board_debug_uart_init()

[platform/kernel/u-boot.git] / arch / arm / mach-rockchip / rk3399-board-spl.c

diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index 54a4b84..800ca80 100644 (file)
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -127,53 +127,6 @@ void secure_timer_init(void)
        writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
 }
 
-void board_debug_uart_init(void)
-{
-#define GRF_BASE       0xff770000
-#define GPIO0_BASE     0xff720000
-#define PMUGRF_BASE    0xff320000
-       struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
-#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-       struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
-       struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
-#endif
-
-#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
-       /* Enable early UART0 on the RK3399 */
-       rk_clrsetreg(&grf->gpio2c_iomux,
-                    GRF_GPIO2C0_SEL_MASK,
-                    GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
-       rk_clrsetreg(&grf->gpio2c_iomux,
-                    GRF_GPIO2C1_SEL_MASK,
-                    GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
-#else
-# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-       rk_setreg(&grf->io_vsel, 1 << 0);
-
-       /*
-        * Let's enable these power rails here, we are already running the SPI
-        * Flash based code.
-        */
-       spl_gpio_output(gpio, GPIO(BANK_B, 2), 1);  /* PP1500_EN */
-       spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
-
-       spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);  /* PP3000_EN */
-       spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
-#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
-
-       /* Enable early UART2 channel C on the RK3399 */
-       rk_clrsetreg(&grf->gpio4c_iomux,
-                    GRF_GPIO4C3_SEL_MASK,
-                    GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
-       rk_clrsetreg(&grf->gpio4c_iomux,
-                    GRF_GPIO4C4_SEL_MASK,
-                    GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
-       /* Set channel C as UART2 input */
-       rk_clrsetreg(&grf->soc_con7,
-                    GRF_UART_DBG_SEL_MASK,
-                    GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
-#endif
-}
 
 void board_init_f(ulong dummy)
 {
@@ -183,8 +136,7 @@ void board_init_f(ulong dummy)
        struct rk3399_grf_regs *grf;
        int ret;
 
-#define EARLY_UART
-#ifdef EARLY_UART
+#ifdef CONFIG_DEBUG_UART
        debug_uart_init();
 
 # ifdef CONFIG_TARGET_CHROMEBOOK_BOB