static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
{ .irq = INT_35XX_UART4_IRQ, },
+ { .irq = -1 }
};
static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+ { .dma_req = -1 }
+};
+
+/*
+ * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or
+ * uart2_fck being enabled. So we add uart1_fck as an optional clock,
+ * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really
+ * should not be needed. The functional clock structure of the AM35xx
+ * UART4 is extremely unclear and opaque; it is unclear what the role
+ * of uart1/2_fck is for the UART4. Any clarification from either
+ * empirical testing or the AM3505/3517 hardware designers would be
+ * most welcome.
+ */
+static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = {
+ { .role = "softreset_uart1_fck", .clk = "uart1_fck" },
};
static struct omap_hwmod am35xx_uart4_hwmod = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .module_bit = AM35XX_EN_UART4_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_idle_bit = AM35XX_ST_UART4_SHIFT,
},
},
+ .opt_clks = am35xx_uart4_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks),
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_uart_class,
};
/* usb_otg_hs */
static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-
{ .name = "mc", .irq = 71 },
{ .irq = -1 }
};
static struct omap_hwmod_class am35xx_usbotg_class = {
.name = "am35xx_usbotg",
- .sysc = NULL,
};
static struct omap_hwmod am35xx_usbhsotg_hwmod = {
.name = "am35x_otg_hs",
.mpu_irqs = am35xx_usbhsotg_mpu_irqs,
- .main_clk = NULL,
- .prcm = {
- .omap2 = {
- },
- },
+ .main_clk = "hsotgusb_fck",
.class = &am35xx_usbotg_class,
+ .flags = HWMOD_NO_IDLEST,
};
/* MMC/SD/SDIO common */
static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
.master = &am35xx_usbhsotg_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
+ .clk = "hsotgusb_ick",
.user = OCP_USER_MPU,
};
+
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.master = &omap3xxx_l4_core_hwmod,
.pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
+ { }
};
static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_usbhsotg_hwmod,
- .clk = "l4_ick",
+ .clk = "hsotgusb_ick",
.addr = am35xx_usbhsotg_addrs,
.user = OCP_USER_MPU,
};
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* am35xx has Davinci MDIO & EMAC */
+static struct omap_hwmod_class am35xx_mdio_class = {
+ .name = "davinci_mdio",
+};
+
+static struct omap_hwmod am35xx_mdio_hwmod = {
+ .name = "davinci_mdio",
+ .class = &am35xx_mdio_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L3 directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_mdio__l3 = {
+ .master = &am35xx_mdio_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "emac_fck",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = {
+ {
+ .pa_start = AM35XX_IPSS_MDIO_BASE,
+ .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> davinci mdio */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_mdio_hwmod,
+ .clk = "emac_fck",
+ .addr = am35xx_mdio_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
+ { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
+ { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
+ { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
+ { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_class am35xx_emac_class = {
+ .name = "davinci_emac",
+};
+
+static struct omap_hwmod am35xx_emac_hwmod = {
+ .name = "davinci_emac",
+ .mpu_irqs = am35xx_emac_mpu_irqs,
+ .class = &am35xx_emac_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* l3_core -> davinci emac interface */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L3 directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_emac__l3 = {
+ .master = &am35xx_emac_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "emac_ick",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am35xx_emac_addrs[] = {
+ {
+ .pa_start = AM35XX_IPSS_EMAC_BASE,
+ .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> davinci emac */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_l4_core__emac = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_emac_hwmod,
+ .clk = "emac_ick",
+ .addr = am35xx_emac_addrs,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3_main__l4_core,
&omap3xxx_l3_main__l4_per,
&omap3xxx_l4_core__usb_tll_hs,
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
+ &am35xx_mdio__l3,
+ &am35xx_l4_core__mdio,
+ &am35xx_emac__l3,
+ &am35xx_l4_core__emac,
NULL
};
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / blobdiff