Merge branch 'master' of git://git.denx.de/u-boot-mmc

[platform/kernel/u-boot.git] / arch / arm / mach-omap2 / omap5 / Kconfig

diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index 22259dc..1a66abd 100644 (file)
--- a/arch/arm/mach-omap2/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
@@ -1,45 +1,18 @@
 if OMAP54XX
 
-config SPL_EXT_SUPPORT
-       default y
-
-config SPL_FAT_SUPPORT
-       default y
-
-config SPL_GPIO_SUPPORT
-       default y
-
-config SPL_I2C_SUPPORT
-       default y
-
-config SPL_LIBCOMMON_SUPPORT
-       default y
-
-config SPL_LIBDISK_SUPPORT
-       default y
-
-config SPL_LIBGENERIC_SUPPORT
-       default y
-
-config SPL_MMC_SUPPORT
-       default y
-
-config SPL_NAND_SUPPORT
-       default y
-
-config SPL_POWER_SUPPORT
-       default y
-
-config SPL_SERIAL_SUPPORT
-       default y
-
-config SPL_DISPLAY_PRINT
-       default y
+config DRA7XX
+       bool
+       help
+         DRA7xx is an OMAP based SOC with Dual Core A-15s.
 
 choice
        prompt "OMAP5 board select"
        optional
 
+config TARGET_CL_SOM_AM57X
+       bool "CompuLab CL-SOM-AM57x"
+       select DRA7XX
+
 config TARGET_CM_T54
        bool "CompuLab CM-T54"
 
@@ -48,11 +21,15 @@ config TARGET_OMAP5_UEVM
 
 config TARGET_DRA7XX_EVM
        bool "TI DRA7XX"
+       select BOARD_LATE_INIT
+       select DRA7XX
        select TI_I2C_BOARD_DETECT
        select PHYS_64BIT
 
 config TARGET_AM57XX_EVM
        bool "AM57XX"
+       select BOARD_LATE_INIT
+       select DRA7XX
        select TI_I2C_BOARD_DETECT
 
 endchoice
@@ -86,6 +63,117 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
          using hardware memory firewalls. This value must be smaller than the
          TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
 
+config OMAP_PLATFORM_RESET_TIME_MAX_USEC
+       int "Something"
+       range 0  31219
+       default 31219
+       help
+         Most OMAPs' provide a way to specify the time for which the reset
+         should be held low while the voltages and Oscillator outputs
+         stabilize.
+         This time is mostly board and PMIC dependent. Hence the boards are
+         expected to specify a pre-computed time using the above option.
+         This value can be computed using a summation of the below 3
+         parameters
+         1: Time taken by the Osciallator to stop and restart
+         2: PMIC OTP time
+         3: Voltage ramp time, which can be derived using the PMIC slew rate
+            and value of voltage ramp needed.
+
+if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
+menu "Voltage Domain OPP selections"
+
+choice
+       prompt "MPU Voltage Domain"
+       default DRA7_MPU_OPP_NOM
+        help
+         Select the Operating Performance Point(OPP) for the MPU voltage
+         domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_MPU_OPP_NOM
+       bool "OPP NOM"
+       help
+         This config option enables Normal OPP for MPU. This is the safest
+         option for booting.
+
+endchoice
+
+choice
+       prompt "DSPEVE Voltage Domain"
+        help
+         Select the Operating Performance Point(OPP) for the DSPEVE voltage
+         domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_DSPEVE_OPP_NOM
+       bool "OPP NOM"
+       help
+         This config option enables Normal OPP for DSPEVE. This is the safest
+         option for booting and choose this when unsure about other OPPs .
+
+config DRA7_DSPEVE_OPP_OD
+       bool "OPP OD"
+       help
+         This config option enables Over drive OPP for DSPEVE.
+
+config DRA7_DSPEVE_OPP_HIGH
+       bool "OPP HIGH"
+       help
+         This config option enables High OPP for DSPEVE.
+
+endchoice
+
+choice
+       prompt "IVA Voltage Domain"
+        help
+         Select the Operating Performance Point(OPP) for the IVA voltage
+         domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_IVA_OPP_NOM
+       bool "OPP NOM"
+       help
+         This config option enables Normal OPP for IVA. This is the safest
+         option for booting and choose this when unsure about other OPPs .
+
+config DRA7_IVA_OPP_OD
+       bool "OPP OD"
+       help
+         This config option enables Over drive OPP for IVA.
+
+config DRA7_IVA_OPP_HIGH
+       bool "OPP HIGH"
+       help
+         This config option enables High OPP for IVA.
+
+endchoice
+
+choice
+       prompt "GPU Voltage Domain"
+        help
+         Select the Operating Performance Point(OPP) for the GPU voltage
+         domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_GPU_OPP_NOM
+       bool "OPP NOM"
+       help
+         This config option enables Normal OPP for GPU. This is the safest
+         option for booting and choose this when unsure about other OPPs .
+
+config DRA7_GPU_OPP_OD
+       bool "OPP OD"
+       help
+         This config option enables Over drive OPP for GPU.
+
+config DRA7_GPU_OPP_HIGH
+       bool "OPP HIGH"
+       help
+         This config option enables High OPP for GPU.
+
+endchoice
+
+endmenu
+endif
+
+source "board/compulab/cl-som-am57x/Kconfig"
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"