Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

[platform/kernel/u-boot.git] / arch / arm / mach-omap2 / omap3 / board.c

diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c
index 658ef8c..8b70251 100644 (file)
--- a/arch/arm/mach-omap2/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
@@ -16,7 +16,9 @@
  *
  */
 #include <common.h>
+#include <command.h>
 #include <dm.h>
+#include <init.h>
 #include <spl.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
@@ -33,10 +35,10 @@ extern omap3_sysinfo sysinfo;
 static void omap3_invalidate_l2_cache_secure(void);
 #endif
 
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 /* Manually initialize GPIO banks when OF_CONTROL doesn't */
-static const struct omap_gpio_platdata omap34xx_gpio[] = {
+static const struct omap_gpio_plat omap34xx_gpio[] = {
        { 0, OMAP34XX_GPIO1_BASE },
        { 1, OMAP34XX_GPIO2_BASE },
        { 2, OMAP34XX_GPIO3_BASE },
@@ -45,7 +47,7 @@ static const struct omap_gpio_platdata omap34xx_gpio[] = {
        { 5, OMAP34XX_GPIO6_BASE },
 };
 
-U_BOOT_DEVICES(omap34xx_gpios) = {
+U_BOOT_DRVINFOS(omap34xx_gpios) = {
        { "gpio_omap", &omap34xx_gpio[0] },
        { "gpio_omap", &omap34xx_gpio[1] },
        { "gpio_omap", &omap34xx_gpio[2] },
@@ -69,12 +71,20 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
 
 #endif
 
+void early_system_init(void)
+{
+       hw_data_init();
+}
+
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+       !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
+
 /******************************************************************************
  * Routine: secure_unlock
  * Description: Setup security registers for access
  *              (GP Device only)
  *****************************************************************************/
-void secure_unlock_mem(void)
+static void secure_unlock_mem(void)
 {
        struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM;
        struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM;
@@ -112,7 +122,7 @@ void secure_unlock_mem(void)
  *             configure secure registers and exit secure world
  *              general use.
  *****************************************************************************/
-void secureworld_exit(void)
+static void secureworld_exit(void)
 {
        unsigned long i;
 
@@ -143,7 +153,7 @@ void secureworld_exit(void)
  * Description: If chip is GP/EMU(special) type, unlock the SRAM for
  *              general use.
  *****************************************************************************/
-void try_unlock_memory(void)
+static void try_unlock_memory(void)
 {
        int mode;
        int in_sdram = is_running_in_sdram();
@@ -172,11 +182,6 @@ void try_unlock_memory(void)
        return;
 }
 
-void early_system_init(void)
-{
-       hw_data_init();
-}
-
 /******************************************************************************
  * Routine: s_init
  * Description: Does early system init of muxing and clocks.
@@ -205,6 +210,7 @@ void s_init(void)
        ehci_clocks_enable();
 #endif
 }
+#endif
 
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
@@ -279,7 +285,8 @@ void abort(void)
 /******************************************************************************
  * OMAP3 specific command to switch between NAND HW and SW ecc
  *****************************************************************************/
-static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_switch_ecc(struct cmd_tbl *cmdtp, int flag, int argc,
+                        char *const argv[])
 {
        int hw, strength = 1;