# We only enable the clocks for the GPIO banks that a given board requies.
config OMAP3_GPIO_2
bool
+ default y if CMD_GPIO
config OMAP3_GPIO_3
bool
+ default y if CMD_GPIO
config OMAP3_GPIO_4
bool
+ default y if CMD_GPIO
config OMAP3_GPIO_5
bool
+ default y if CMD_GPIO
config OMAP3_GPIO_6
bool
+ default y if CMD_GPIO
choice
prompt "OMAP3 board select"
config TARGET_AM3517_EVM
bool "AM3517 EVM"
-
-config TARGET_MT_VENTOUX
- bool "TeeJet Mt.Ventoux"
- select OMAP3_GPIO_4
- select OMAP3_GPIO_5 if USB_EHCI_HCD
+ select DM
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_5
select OMAP3_GPIO_6
+ imply CMD_DM
config TARGET_CM_T35
bool "CompuLab CM-T3530 and CM-T3730 boards"
select OMAP3_GPIO_5
select OMAP3_GPIO_6 if LED_STATUS
-config TARGET_CM_T3517
- bool "CompuLab CM-T3517 boards"
- select OMAP3_GPIO_2
- select OMAP3_GPIO_5
- select OMAP3_GPIO_6 if LED_STATUS
-
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_OMAP3_EVM
bool "TI OMAP3 EVM"
+ select DM
+ select DM_GPIO
+ select DM_SERIAL
+ select OMAP3_GPIO_3
+ imply CMD_DM
config TARGET_OMAP3_IGEP00X0
bool "IGEP"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_5
select OMAP3_GPIO_6
+ imply CMD_DM
config TARGET_OMAP3_OVERO
bool "OMAP35xx Gumstix Overo"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
+ imply CMD_DM
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_AM3517_CRANE
bool "am3517_crane"
select OMAP3_GPIO_4
select OMAP3_GPIO_6
-config TARGET_ECO5PK
- bool "ECO5PK"
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_TRICORDER
bool "Tricorder"
select OMAP3_GPIO_2
-config TARGET_MCX
- bool "MCX"
- select BOARD_LATE_INIT
- select OMAP3_GPIO_2 if USB_EHCI_HCD
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_6
+ imply CMD_DM
config TARGET_NOKIA_RX51
bool "Nokia RX51"
select OMAP3_GPIO_5
select OMAP3_GPIO_6
-config TARGET_TWISTER
- bool "Twister"
- select OMAP3_GPIO_2
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_SNIPER
bool "LG Optimus Black"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
+ imply CMD_DM
endchoice
+choice
+ prompt "Memory Controller"
+ default SDRC
+
+config SDRC
+ bool "SDRC controller"
+ help
+ The default memory controller on most OMAP3 boards is SDRC.
+
+config EMIF4
+ bool "EMIF4 controller"
+ help
+ Enable this on boards like AM3517 which use EMIF4 controller
+endchoice
+
+config SPL_OMAP3_ID_NAND
+ bool "Support OMAP3-specific ID and MFR function"
+ help
+ Support for an OMAP3-specific set of functions to return the
+ ID and MFR of the first attached NAND chip, if present.
+
config SYS_SOC
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
-source "board/teejet/mt_ventoux/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
-source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
source "board/logicpd/zoom1/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
-source "board/8dtech/eco5pk/Kconfig"
source "board/corscience/tricorder/Kconfig"
-source "board/htkw/mcx/Kconfig"
source "board/logicpd/omap3som/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
-source "board/technexion/twister/Kconfig"
source "board/quipos/cairo/Kconfig"
source "board/lg/sniper/Kconfig"