return;
}
clk_set_rate(phy_ref_clk, 19200000);
- clk_enable(phy_ref_clk);
+ clk_prepare_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init and reset phy+hub */
ret = gpio_request_array(panda_ehci_gpios,
};
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- /* PANDA ref clock is 38.4 MHz */
- .board_ref_clock = 2,
+ .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
static struct twl6040_codec_data twl6040_codec = {
.audpwron_gpio = 127,
};
+static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl6040", 0x4b),
+ .irq = 119 + OMAP44XX_IRQ_GIC_START,
+ .platform_data = &twl6040_data,
+ },
+};
+
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
TWL_COMMON_REGULATOR_CLK32KG |
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
- omap4_pmic_init("twl6030", &omap4_panda_twldata,
- &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
+ omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
+ ARRAY_SIZE(panda_i2c_1_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ /* GPIO_127 for twl6040 */
+ OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* McPDM */
+ OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ /* McBSP1 */
+ OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};