+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* Header file for the Marvell's Feroceon CPU core.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _MVEBU_SOC_H
#define SOC_88F6810_ID 0x6810
#define SOC_88F6820_ID 0x6820
#define SOC_88F6828_ID 0x6828
+#define SOC_98DX3236_ID 0xf410
+#define SOC_98DX3336_ID 0xf400
+#define SOC_98DX4251_ID 0xfc00
/* A375 revisions */
#define MV_88F67XX_A0_ID 0x3
/* A38x revisions */
#define MV_88F68XX_Z1_ID 0x0
#define MV_88F68XX_A0_ID 0x4
+#define MV_88F68XX_B0_ID 0xa
/* TCLK Core Clock definition */
#ifndef CONFIG_SYS_TCLK
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
#endif
-/* Armada XP PLL frequency (used for NAND clock generation) */
-#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
-
/* SOC specific definations */
#define INTREG_BASE 0xd0000000
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700)
/*
* The SPL U-Boot version still runs with the default
* address for the internal registers, configured by
* required for the Linux kernel.
*/
#define SOC_REGS_PHY_BASE 0xd0000000
+#elif defined(CONFIG_ARMADA_8K)
+#define SOC_REGS_PHY_BASE 0xf0000000
#else
#define SOC_REGS_PHY_BASE 0xf1000000
#endif
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
+#define MVEBU_REG_PCIE0_BASE (MVEBU_REGISTER(0x80000))
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
#define BOOTROM_ERR_MODE_OFFS 28
#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS)
#define BOOTROM_ERR_MODE_UART 0x6
+#define BOOTROM_ERR_CODE_OFFS 0
+#define BOOTROM_ERR_CODE_MASK (0xf << BOOTROM_ERR_CODE_OFFS)
#if defined(CONFIG_ARMADA_375)
/* SAR values for Armada 375 */
#define BOOT_DEV_SEL_OFFS 4
#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
+#define BOOT_FROM_NAND 0x0A
#define BOOT_FROM_UART 0x28
+#define BOOT_FROM_UART_ALT 0x3f
#define BOOT_FROM_SPI 0x32
#define BOOT_FROM_MMC 0x30
#define BOOT_FROM_MMC_ALT 0x31