*/
#include <common.h>
+#include <cpu_func.h>
+#include <image.h>
#include <spl.h>
#include "common.h"
#include <dm.h>
#include <remoteproc.h>
+#include <asm/cache.h>
#include <linux/soc/ti/ti_sci_protocol.h>
#include <fdt_support.h>
#include <asm/arch/sys_proto.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <fs_loader.h>
+#include <fs.h>
+#include <env.h>
+#include <elf.h>
struct ti_sci_handle *get_ti_sci_handle(void)
{
struct udevice *dev;
int ret;
- ret = uclass_get_device(UCLASS_FIRMWARE, 0, &dev);
+ ret = uclass_get_device_by_driver(UCLASS_FIRMWARE,
+ DM_GET_DRIVER(ti_sci), &dev);
if (ret)
panic("Failed to get SYSFW (%d)\n", ret);
return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev);
}
+void k3_sysfw_print_ver(void)
+{
+ struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+ char fw_desc[sizeof(ti_sci->version.firmware_description) + 1];
+
+ /*
+ * Output System Firmware version info. Note that since the
+ * 'firmware_description' field is not guaranteed to be zero-
+ * terminated we manually add a \0 terminator if needed. Further
+ * note that we intentionally no longer rely on the extended
+ * printf() formatter '%.*s' to not having to require a more
+ * full-featured printf() implementation.
+ */
+ strncpy(fw_desc, ti_sci->version.firmware_description,
+ sizeof(ti_sci->version.firmware_description));
+ fw_desc[sizeof(fw_desc) - 1] = '\0';
+
+ printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+ ti_sci->version.abi_major, ti_sci->version.abi_minor,
+ ti_sci->version.firmware_revision, fw_desc);
+}
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_K3_EARLY_CONS
#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
+
+void init_env(void)
+{
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ char *part;
+
+ env_init();
+ env_relocate();
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ part = env_get("bootpart");
+ env_set("storage_interface", "mmc");
+ env_set("fw_dev_part", part);
+ break;
+ case BOOT_DEVICE_SPI:
+ env_set("storage_interface", "ubi");
+ env_set("fw_ubi_mtdpart", "UBI");
+ env_set("fw_ubi_volume", "UBI0");
+ break;
+ default:
+ printf("%s from device %u not supported!\n",
+ __func__, spl_boot_device());
+ return;
+ }
+#endif
+}
+
+#ifdef CONFIG_FS_LOADER
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+ struct udevice *fsdev;
+ char *name = NULL;
+ int size = 0;
+
+ *loadaddr = 0;
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ name = env_get(name_fw);
+ *loadaddr = env_get_hex(name_loadaddr, *loadaddr);
+ break;
+ default:
+ printf("Loading rproc fw image from device %u not supported!\n",
+ spl_boot_device());
+ return 0;
+ }
+#endif
+ if (!*loadaddr)
+ return 0;
+
+ if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
+ size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr,
+ 0, 0);
+ }
+
+ return size;
+}
+#else
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+ return 0;
+}
+#endif
+
+__weak void start_non_linux_remote_cores(void)
+{
+}
+
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
struct ti_sci_handle *ti_sci = get_ti_sci_handle();
- int ret;
+ u32 loadaddr = 0;
+ int ret, size;
/* Release all the exclusive devices held by SPL before starting ATF */
ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
+ ret = rproc_init();
+ if (ret)
+ panic("rproc failed to be initialized (%d)\n", ret);
+
+ init_env();
+ start_non_linux_remote_cores();
+ size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
+ &loadaddr);
+
+
/*
* It is assumed that remoteproc device 1 is the corresponding
* Cortex-A core which runs ATF. Make sure DT reflects the same.
*/
- ret = rproc_dev_init(1);
- if (ret)
- panic("%s: ATF failed to initialize on rproc (%d)\n", __func__,
- ret);
-
ret = rproc_load(1, spl_image->entry_point, 0x200);
if (ret)
panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret);
ret = rproc_start(1);
if (ret)
panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
+ if (!(size > 0 && valid_elf_image(loadaddr))) {
+ debug("Shutting down...\n");
+ release_resources_for_core_shutdown();
- debug("Releasing resources...\n");
- release_resources_for_core_shutdown();
+ while (1)
+ asm volatile("wfe");
+ }
+
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t)load_elf_image_phdr(loadaddr);
- debug("Finalizing core shutdown...\n");
- while (1)
- asm volatile("wfe");
+ image_entry();
}
#endif
offs = fdt_path_offset(blob, node_path);
if (offs < 0) {
- debug("Node %s not found.\n", node_path);
- return 0;
+ printf("Node %s not found.\n", node_path);
+ return offs;
}
ret = fdt_setprop_string(blob, offs, "status", "disabled");
if (ret < 0) {
u32 soc, rev;
char *name;
- soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) &
- DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT;
+ soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+ JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
rev = (readl(CTRLMMR_WKUP_JTAG_ID) &
JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
printf("SoC: ");
switch (soc) {
- case AM654:
- name = "AM654";
+ case AM65X:
+ name = "AM65x";
break;
case J721E:
name = "J721E";
name = "Unknown Silicon";
};
- printf("%s PG ", name);
+ printf("%s SR ", name);
switch (rev) {
case REV_PG1_0:
name = "1.0";
return 0;
}
#endif
+
+#ifdef CONFIG_ARM64
+void board_prep_linux(bootm_headers_t *images)
+{
+ debug("Linux kernel Image start = 0x%lx end = 0x%lx\n",
+ images->os.start, images->os.end);
+ __asm_flush_dcache_range(images->os.start,
+ ROUND(images->os.end,
+ CONFIG_SYS_CACHELINE_SIZE));
+}
+#endif
+
+#ifdef CONFIG_CPU_V7R
+void disable_linefill_optimization(void)
+{
+ u32 actlr;
+
+ /*
+ * On K3 devices there are 2 conditions where R5F can deadlock:
+ * 1.When software is performing series of store operations to
+ * cacheable write back/write allocate memory region and later
+ * on software execute barrier operation (DSB or DMB). R5F may
+ * hang at the barrier instruction.
+ * 2.When software is performing a mix of load and store operations
+ * within a tight loop and store operations are all writing to
+ * cacheable write back/write allocates memory regions, R5F may
+ * hang at one of the load instruction.
+ *
+ * To avoid the above two conditions disable linefill optimization
+ * inside Cortex R5F.
+ */
+ asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (actlr));
+ actlr |= (1 << 13); /* Set DLFO bit */
+ asm("mcr p15, 0, %0, c1, c0, 1" : : "r" (actlr));
+}
+#endif
+
+void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size)
+{
+ struct ti_sci_msg_fwl_region region;
+ struct ti_sci_fwl_ops *fwl_ops;
+ struct ti_sci_handle *ti_sci;
+ size_t i, j;
+
+ ti_sci = get_ti_sci_handle();
+ fwl_ops = &ti_sci->ops.fwl_ops;
+ for (i = 0; i < fwl_data_size; i++) {
+ for (j = 0; j < fwl_data[i].regions; j++) {
+ region.fwl_id = fwl_data[i].fwl_id;
+ region.region = j;
+ region.n_permission_regs = 3;
+
+ fwl_ops->get_fwl_region(ti_sci, ®ion);
+
+ if (region.control != 0) {
+ pr_debug("Attempting to disable firewall %5d (%25s)\n",
+ region.fwl_id, fwl_data[i].name);
+ region.control = 0;
+
+ if (fwl_ops->set_fwl_region(ti_sci, ®ion))
+ pr_err("Could not disable firewall %5d (%25s)\n",
+ region.fwl_id, fwl_data[i].name);
+ }
+ }
+ }
+}