{
unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
+ u32 mmc_index = ((reg >> 11) & 0x03);
/*
* Check for BMODE if serial downloader is enabled
/* SD/eSD: 8.5.3, Table 8-15 */
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
- return BOOT_DEVICE_MMC1;
- /* MMC/eMMC: 8.5.3 */
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
- return BOOT_DEVICE_MMC1;
+ if (mmc_index == 1)
+ return BOOT_DEVICE_MMC2;
+ else
+ return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2, Table 8-10 */
case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
return BOOT_DEVICE_NAND;
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+ /* QSPI boot */
+ case IMX6_BMODE_QSPI:
+ return BOOT_DEVICE_SPI;
+#endif
}
return BOOT_DEVICE_NONE;
}
-#elif defined(CONFIG_MX7) || defined(CONFIG_MX8M)
-/* Translate iMX7/MX8M boot device to the SPL boot device enumeration */
+#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8)
+/* Translate iMX7/i.MX8M boot device to the SPL boot device enumeration */
u32 spl_boot_device(void)
{
#if defined(CONFIG_MX7)
enum boot_device boot_device_spl = get_boot_device();
switch (boot_device_spl) {
+#if defined(CONFIG_MX7)
case SD1_BOOT:
case MMC1_BOOT:
case SD2_BOOT:
case SD3_BOOT:
case MMC3_BOOT:
return BOOT_DEVICE_MMC1;
+#elif defined(CONFIG_IMX8)
+ case MMC1_BOOT:
+ return BOOT_DEVICE_MMC1;
+ case SD2_BOOT:
+ return BOOT_DEVICE_MMC2_2;
+ case SD3_BOOT:
+ return BOOT_DEVICE_MMC1;
+ case FLEXSPI_BOOT:
+ return BOOT_DEVICE_SPI;
+#elif defined(CONFIG_IMX8M)
+ case SD1_BOOT:
+ case MMC1_BOOT:
+ return BOOT_DEVICE_MMC1;
+ case SD2_BOOT:
+ case MMC2_BOOT:
+ return BOOT_DEVICE_MMC2;
+#endif
case NAND_BOOT:
return BOOT_DEVICE_NAND;
case SPI_NOR_BOOT:
return BOOT_DEVICE_NONE;
}
}
-#endif /* CONFIG_MX6 || CONFIG_MX7 || CONFIG_MX8M */
+#endif /* CONFIG_MX7 || CONFIG_IMX8M || CONFIG_IMX8 */
-#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
+#ifdef CONFIG_SPL_USB_GADGET
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM + 0xfff, &dev->idProduct);
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
u32 spl_boot_mode(const u32 boot_device)
{
+/*
+ * When CONFIG_SPL_FORCE_MMC_BOOT is defined the 'boot_device' is used
+ * unconditionally to decide about device to use for booting.
+ * This is crucial for falcon boot mode, when board boots up (i.e. ROM
+ * loads SPL) from slow SPI-NOR memory and afterwards the SPL's 'falcon' boot
+ * mode is used to load Linux OS from eMMC partition.
+ */
+#ifdef CONFIG_SPL_FORCE_MMC_BOOT
+ switch (boot_device) {
+#else
switch (spl_boot_device()) {
+#endif
/* for MMC return either RAW or FAT mode */
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
-#if defined(CONFIG_SPL_FAT_SUPPORT)
+ case BOOT_DEVICE_MMC2_2:
+#if defined(CONFIG_SPL_FS_FAT)
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
debug("image entry point: 0x%lX\n", spl_image->entry_point);
- /* HAB looks for the CSF at the end of the authenticated data therefore,
- * we need to subtract the size of the CSF from the actual filesize */
- offset = spl_image->size - CONFIG_CSF_SIZE;
- if (!imx_hab_authenticate_image(spl_image->load_addr,
- offset + IVT_SIZE + CSF_PAD_SIZE,
- offset)) {
+ if (spl_image->flags & SPL_FIT_FOUND) {
image_entry();
} else {
+ /*
+ * HAB looks for the CSF at the end of the authenticated
+ * data therefore, we need to subtract the size of the
+ * CSF from the actual filesize
+ */
+ offset = spl_image->size - CONFIG_CSF_SIZE;
+ if (!imx_hab_authenticate_image(spl_image->load_addr,
+ offset + IVT_SIZE +
+ CSF_PAD_SIZE, offset)) {
+ image_entry();
+ } else {
+ puts("spl: ERROR: image authentication fail\n");
+ hang();
+ }
+ }
+}
+
+#if !defined(CONFIG_SPL_FIT_SIGNATURE)
+ulong board_spl_fit_size_align(ulong size)
+{
+ /*
+ * HAB authenticate_image requests the IVT offset is
+ * aligned to 0x1000
+ */
+
+ size = ALIGN(size, 0x1000);
+ size += CONFIG_CSF_SIZE;
+
+ return size;
+}
+
+void board_spl_fit_post_load(ulong load_addr, size_t length)
+{
+ u32 offset = length - CONFIG_CSF_SIZE;
+
+ if (imx_hab_authenticate_image(load_addr,
+ offset + IVT_SIZE + CSF_PAD_SIZE,
+ offset)) {
puts("spl: ERROR: image authentication unsuccessful\n");
hang();
}
}
+#endif
#endif