#include <config.h>
#include <asm-offsets.h>
#include <linux/linkage.h>
+#ifdef CONFIG_CPU_V7M
+#include <asm/armv7m.h>
+#endif
/*
* This file handles the target-independent stages of the U-Boot
* the GD ('global data') structure, both located in some readily
* available RAM (SRAM, locked cache...). In this context, VARIABLE
* global data, initialized or not (BSS), are UNAVAILABLE; only
- * CONSTANT initialized data are available.
+ * CONSTANT initialized data are available. GD should be zeroed
+ * before board_init_f() is called.
*
* 2. Call board_init_f(). This function prepares the hardware for
* execution from system RAM (DRAM, DDR...) As system RAM may not
* data include the relocation destination, the future stack, and
* the future GD location.
*
- * (the following applies only to non-SPL builds)
- *
* 3. Set up intermediate environment where the stack and GD are the
* ones allocated by board_init_f() in system RAM, but BSS and
* initialized non-const data are still not available.
*
- * 4. Call relocate_code(). This function relocates U-Boot from its
- * current location into the relocation destination computed by
- * board_init_f().
+ * 4a.For U-Boot proper (not SPL), call relocate_code(). This function
+ * relocates U-Boot from its current location into the relocation
+ * destination computed by board_init_f().
+ *
+ * 4b.For SPL, board_init_f() just returns (to crt0). There is no
+ * code relocation in SPL.
*
* 5. Set up final environment for calling board_init_r(). This
* environment has BSS (initialized to 0), initialized non-const
* data (initialized to their intended value), and stack in system
- * RAM. GD has retained values set by board_init_f(). Some CPUs
- * have some work left to do at this point regarding memory, so
- * call c_runtime_cpu_setup.
+ * RAM (for SPL moving the stack and GD into RAM is optional - see
+ * CONFIG_SPL_STACK_R). GD has retained values set by board_init_f().
+ *
+ * 6. For U-Boot proper (not SPL), some CPUs have some work left to do
+ * at this point regarding memory, so call c_runtime_cpu_setup.
*
- * 6. Branch to board_init_r().
+ * 7. Branch to board_init_r().
+ *
+ * For more information see 'Board Initialisation Flow in README.
*/
/*
#else
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
#endif
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
mov r2, sp
sub sp, sp, #GD_SIZE /* allocate one GD above SP */
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
mov r9, sp /* GD is above SP */
mov r1, sp
mov r0, #0
clr_gd:
cmp r1, r2 /* while not at end of GD */
+#if defined(CONFIG_CPU_V7M)
+ itt lo
+#endif
strlo r0, [r1] /* clear 32-bit GD word */
addlo r1, r1, #4 /* move to next */
blo clr_gd
-#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
sub sp, sp, #CONFIG_SYS_MALLOC_F_LEN
str sp, [r9, #GD_MALLOC_BASE]
#endif
*/
ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
ldr r9, [r9, #GD_BD] /* r9 = gd->bd */
sub r9, r9, #GD_SIZE /* new GD is below bd */
adr lr, here
ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
+#if defined(CONFIG_CPU_V7M)
+ orr lr, #1 /* As required by Thumb-only */
+#endif
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
/* Set up final (full) environment */
bl c_runtime_cpu_setup /* we still call old routine here */
-
+#endif
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_FRAMEWORK)
+# ifdef CONFIG_SPL_BUILD
+ /* Use a DRAM stack for the rest of SPL, if requested */
+ bl spl_relocate_stack_gd
+ cmp r0, #0
+ movne sp, r0
+# endif
ldr r0, =__bss_start /* this is auto-relocated! */
- ldr r1, =__bss_end /* this is auto-relocated! */
+#ifdef CONFIG_USE_ARCH_MEMSET
+ ldr r3, =__bss_end /* this is auto-relocated! */
+ mov r1, #0x00000000 /* prepare zero to clear BSS */
+
+ subs r2, r3, r0 /* r2 = memset len */
+ bl memset
+#else
+ ldr r1, =__bss_end /* this is auto-relocated! */
mov r2, #0x00000000 /* prepare zero to clear BSS */
clbss_l:cmp r0, r1 /* while not at end of BSS */
+#if defined(CONFIG_CPU_V7M)
+ itt lo
+#endif
strlo r2, [r0] /* clear 32-bit BSS word */
addlo r0, r0, #4 /* move to next */
blo clbss_l
+#endif
+#if ! defined(CONFIG_SPL_BUILD)
bl coloured_LED_init
bl red_led_on
-
+#endif
/* call board_init_r(gd_t *id, ulong dest_addr) */
mov r0, r9 /* gd_t */
ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */
ldr pc, =board_init_r /* this is auto-relocated! */
/* we should not return here. */
-
#endif
ENDPROC(_main)