#define CR_EE (1 << 25) /* Exception (Big) Endian */
#define PGTABLE_SIZE (0x10000)
+/* 2MB granularity */
+#define MMU_SECTION_SHIFT 21
#ifndef __ASSEMBLY__
+enum dcache_option {
+ DCACHE_OFF = 0x3,
+};
+
#define isb() \
({asm volatile( \
"isb" : : : "memory"); \
void __asm_flush_dcache_range(u64 start, u64 end);
void __asm_invalidate_tlb_all(void);
void __asm_invalidate_icache_all(void);
+int __asm_flush_l3_cache(void);
void armv8_switch_to_el2(void);
void armv8_switch_to_el1(void);
void gic_init(void);
void gic_send_sgi(unsigned long sgino);
void wait_for_wakeup(void);
+void protect_secure_region(void);
void smp_kick_all_cpus(void);
void flush_l3_cache(void);
#ifndef __ASSEMBLY__
+/**
+ * save_boot_params() - Save boot parameters before starting reset sequence
+ *
+ * If you provide this function it will be called immediately U-Boot starts,
+ * both for SPL and U-Boot proper.
+ *
+ * All registers are unchanged from U-Boot entry. No registers need be
+ * preserved.
+ *
+ * This is not a normal C function. There is no stack. Return by branching to
+ * save_boot_params_ret.
+ *
+ * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
+ */
+
+/**
+ * save_boot_params_ret() - Return from save_boot_params()
+ *
+ * If you provide save_boot_params(), then you should jump back to this
+ * function when done. Try to preserve all registers.
+ *
+ * If your implementation of save_boot_params() is in C then it is acceptable
+ * to simply call save_boot_params_ret() at the end of your function. Since
+ * there is no link register set up, you cannot just exit the function. U-Boot
+ * will return to the (initialised) value of lr, and likely crash/hang.
+ *
+ * If your implementation of save_boot_params() is in assembler then you
+ * should use 'b' or 'bx' to return to save_boot_params_ret.
+ */
+void save_boot_params_ret(void);
+
#define isb() __asm__ __volatile__ ("" : : : "memory")
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
static inline unsigned int get_cr(void)
{
unsigned int val;
- asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc");
+ asm volatile("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc");
return val;
}
isb();
}
+#ifdef CONFIG_ARMV7
+/* Short-Descriptor Translation Table Level 1 Bits */
+#define TTB_SECT_NS_MASK (1 << 19)
+#define TTB_SECT_NG_MASK (1 << 17)
+#define TTB_SECT_S_MASK (1 << 16)
+/* Note: TTB AP bits are set elsewhere */
+#define TTB_SECT_TEX(x) ((x & 0x7) << 12)
+#define TTB_SECT_DOMAIN(x) ((x & 0xf) << 5)
+#define TTB_SECT_XN_MASK (1 << 4)
+#define TTB_SECT_C_MASK (1 << 3)
+#define TTB_SECT_B_MASK (1 << 2)
+#define TTB_SECT (2 << 0)
+
+/* options available for data cache on each page */
+enum dcache_option {
+ DCACHE_OFF = TTB_SECT_S_MASK | TTB_SECT_DOMAIN(0) |
+ TTB_SECT_XN_MASK | TTB_SECT,
+ DCACHE_WRITETHROUGH = DCACHE_OFF | TTB_SECT_C_MASK,
+ DCACHE_WRITEBACK = DCACHE_WRITETHROUGH | TTB_SECT_B_MASK,
+ DCACHE_WRITEALLOC = DCACHE_WRITEBACK | TTB_SECT_TEX(1),
+};
+#else
/* options available for data cache on each page */
enum dcache_option {
DCACHE_OFF = 0x12,
DCACHE_WRITEBACK = 0x1e,
DCACHE_WRITEALLOC = 0x16,
};
+#endif
/* Size of an MMU section */
enum {
MMU_SECTION_SIZE = 1 << MMU_SECTION_SHIFT,
};
-/**
- * Change the cache settings for a region.
- *
- * \param start start address of memory region to change
- * \param size size of memory region to change
- * \param option dcache option to select
- */
-void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
- enum dcache_option option);
+#ifdef CONFIG_ARMV7
+/* TTBR0 bits */
+#define TTBR0_BASE_ADDR_MASK 0xFFFFC000
+#define TTBR0_RGN_NC (0 << 3)
+#define TTBR0_RGN_WBWA (1 << 3)
+#define TTBR0_RGN_WT (2 << 3)
+#define TTBR0_RGN_WB (3 << 3)
+/* TTBR0[6] is IRGN[0] and TTBR[0] is IRGN[1] */
+#define TTBR0_IRGN_NC (0 << 0 | 0 << 6)
+#define TTBR0_IRGN_WBWA (0 << 0 | 1 << 6)
+#define TTBR0_IRGN_WT (1 << 0 | 0 << 6)
+#define TTBR0_IRGN_WB (1 << 0 | 1 << 6)
+#endif
/**
* Register an update to the page tables, and flush the TLB
*/
void mmu_page_table_flush(unsigned long start, unsigned long stop);
+#ifdef CONFIG_SYS_NONCACHED_MEMORY
+void noncached_init(void);
+phys_addr_t noncached_alloc(size_t size, size_t align);
+#endif /* CONFIG_SYS_NONCACHED_MEMORY */
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
#endif /* CONFIG_ARM64 */
+#ifndef __ASSEMBLY__
+/**
+ * Change the cache settings for a region.
+ *
+ * \param start start address of memory region to change
+ * \param size size of memory region to change
+ * \param option dcache option to select
+ */
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+ enum dcache_option option);
+
+#endif /* __ASSEMBLY__ */
+
#endif