Merge git://git.denx.de/u-boot-usb

[platform/kernel/u-boot.git] / arch / arm / include / asm / imx-common / iomux-v3.h

diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index dec11a1..2581019 100644 (file)
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -111,23 +111,36 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_DSE_40ohm      (6 << 3)
 #define PAD_CTL_DSE_34ohm      (7 << 3)
 
+#if defined CONFIG_MX6SL
+#define PAD_CTL_LVE            (1 << 1)
+#define PAD_CTL_LVE_BIT                (1 << 22)
+#endif
+
 #elif defined(CONFIG_VF610)
 
 #define PAD_MUX_MODE_SHIFT     20
 
+#define PAD_CTL_INPUT_DIFFERENTIAL (1 << 16)
+
 #define PAD_CTL_SPEED_MED      (1 << 12)
 #define PAD_CTL_SPEED_HIGH     (3 << 12)
 
+#define PAD_CTL_SRE            (1 << 11)
+
+#define PAD_CTL_DSE_150ohm     (1 << 6)
 #define PAD_CTL_DSE_50ohm      (3 << 6)
 #define PAD_CTL_DSE_25ohm      (6 << 6)
 #define PAD_CTL_DSE_20ohm      (7 << 6)
 
 #define PAD_CTL_PUS_47K_UP     (1 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PUS_100K_UP    (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP     (3 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PKE            (1 << 3)
 #define PAD_CTL_PUE            (1 << 2 | PAD_CTL_PKE)
 
 #define PAD_CTL_OBE_IBE_ENABLE (3 << 0)
+#define PAD_CTL_OBE_ENABLE     (1 << 1)
+#define PAD_CTL_IBE_ENABLE     (1 << 0)
 
 #else
 
@@ -169,5 +182,41 @@ typedef u64 iomux_v3_cfg_t;
 void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
                                     unsigned count);
+/*
+* Set bits for general purpose registers
+*/
+void imx_iomux_set_gpr_register(int group, int start_bit,
+                                        int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+                               unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+                               u32 *gpio_state);
+#endif
+
+/* macros for declaring and using pinmux array */
+#if defined(CONFIG_MX6QDL)
+#define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x)
+#define SETUP_IOMUX_PAD(def)                                   \
+if (is_cpu_type(MXC_CPU_MX6Q)) {                               \
+       imx_iomux_v3_setup_pad(MX6Q_##def);                     \
+} else {                                                       \
+       imx_iomux_v3_setup_pad(MX6DL_##def);                    \
+}
+#define SETUP_IOMUX_PADS(x)                                    \
+       imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2)
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define IOMUX_PADS(x) MX6Q_##x
+#define SETUP_IOMUX_PAD(def)                                   \
+       imx_iomux_v3_setup_pad(MX6Q_##def);
+#define SETUP_IOMUX_PADS(x)                                    \
+       imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#else
+#define IOMUX_PADS(x) MX6DL_##x
+#define SETUP_IOMUX_PAD(def)                                   \
+       imx_iomux_v3_setup_pad(MX6DL_##def);
+#define SETUP_IOMUX_PADS(x)                                    \
+       imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#endif
 
 #endif /* __MACH_IOMUX_V3_H__*/