CLOCK_OSC_FREQ_COUNT,
};
+/*
+ * Note that no Tegra clock register actually uses all of bits 31:28 as
+ * the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in
+ * those cases, nothing is stored in the bits about the mux field, so it's
+ * safe to pretend that the mux field extends all the way to the end of the
+ * register. As such, the U-Boot clock driver is currently a bit lazy, and
+ * doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps
+ * them all together and pretends they're all 31:28.
+ */
+enum {
+ MASK_BITS_31_30,
+ MASK_BITS_31_29,
+ MASK_BITS_31_28,
+};
+
#include <asm/arch/clock-tables.h>
/* PLL stabilization delay in usec */
#define CLOCK_PLL_STABLE_DELAY_US 300
enum crc_reset_id {
/* Things we can hold in reset for each CPU */
crc_rst_cpu = 1,
- crc_rst_de = 1 << 2, /* What is de? */
- crc_rst_watchdog = 1 << 3,
- crc_rst_debug = 1 << 4,
+ crc_rst_de = 1 << 4, /* What is de? */
+ crc_rst_watchdog = 1 << 8,
+ crc_rst_debug = 1 << 12,
};
/**
void clock_ll_set_source(enum periph_id periph_id, unsigned source);
/**
+ * This function is similar to clock_ll_set_source() except that it can be
+ * used for clocks with more than 2 mux bits.
+ *
+ * @param periph_id peripheral to adjust
+ * @param mux_bits number of mux bits for the clock
+ * @param source source clock (0-15 depending on mux_bits)
+ */
+int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits,
+ unsigned source);
+
+/**
* Set the source and divisor for a peripheral clock. This sets the
* clock rate. You need to look up the datasheet to see the meaning of the
* source parameter as it changes for each peripheral.
/* Returns a pointer to the clock source register for a peripheral */
u32 *get_periph_source_reg(enum periph_id periph_id);
+/* Returns a pointer to the given 'simple' PLL */
+struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid);
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
/* SoC-specific TSC init */
void arch_timer_init(void);
+void tegra30_set_up_pllp(void);
+
+/**
+ * Enable output clock for external peripherals
+ *
+ * @param clk_id Clock ID to output (1, 2 or 3)
+ * @return 0 if OK. -ve on error
+ */
+int clock_external_output(int clk_id);
+
#endif /* _TEGRA_CLOCK_H_ */