/* return the current oscillator clock frequency */
enum clock_osc_freq clock_get_osc_freq(void);
+/* return the clk_m frequency */
+unsigned int clk_m_get_rate(unsigned int parent_rate);
+
/**
* Start PLL using the provided configuration parameters.
*
unsigned divisor);
/**
+ * Returns the current parent clock ID of a given peripheral. This can be
+ * useful in order to call clock_*_periph_*() from generic code that has no
+ * specific knowledge of system-level clock tree structure.
+ *
+ * @param periph_id peripheral to query
+ * @return clock ID of the peripheral's current parent clock
+ */
+enum clock_id clock_get_periph_parent(enum periph_id periph_id);
+
+/**
* Start a peripheral PLL clock at the given rate. This also resets the
* peripheral.
*
/* Initialize the PLLs */
void clock_early_init(void);
+/* @return true if hardware indicates that clock_early_init() was called */
+bool clock_early_init_done(void);
+
/* Returns a pointer to the clock source register for a peripheral */
u32 *get_periph_source_reg(enum periph_id periph_id);
/* Returns a pointer to the given 'simple' PLL */
struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid);
+/*
+ * Given a peripheral ID, determine where the mux bits are in the peripheral
+ * clock's register, the number of divider bits the clock has, and the SoC-
+ * specific clock type.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id peripheral to query
+ * @param mux_bits Set to number of bits in mux register
+ * @param divider_bits Set to the relevant MASK_BITS_* value
+ * @param type Set to the SoC-specific clock type
+ * @return 0 on success, -1 on error
+ */
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type);
+
+/*
+ * Given a peripheral ID and clock source mux value, determine the clock_id
+ * of that peripheral's parent.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id peripheral to query
+ * @param source raw clock source mux value
+ * @return the CLOCK_ID_* value @source represents
+ */
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source);
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
void tegra30_set_up_pllp(void);
+/* Number of PLL-based clocks (i.e. not OSC, MCLK or 32KHz) */
+#define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 3)
+
+struct clk_pll_info {
+ u32 m_shift:5; /* DIVM_SHIFT */
+ u32 n_shift:5; /* DIVN_SHIFT */
+ u32 p_shift:5; /* DIVP_SHIFT */
+ u32 kcp_shift:5; /* KCP/cpcon SHIFT */
+ u32 kvco_shift:5; /* KVCO/lfcon SHIFT */
+ u32 lock_ena:6; /* LOCK_ENABLE/EN_LOCKDET shift */
+ u32 rsvd:1;
+ u32 m_mask:10; /* DIVM_MASK */
+ u32 n_mask:12; /* DIVN_MASK */
+ u32 p_mask:10; /* DIVP_MASK or VCO_MASK */
+ u32 kcp_mask:10; /* KCP/CPCON MASK */
+ u32 kvco_mask:10; /* KVCO/LFCON MASK */
+ u32 lock_det:6; /* LOCK_DETECT/LOCKED shift */
+ u32 rsvd2:6;
+};
+extern struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT];
+
+struct periph_clk_init {
+ enum periph_id periph_id;
+ enum clock_id parent_clock_id;
+};
+extern struct periph_clk_init periph_clk_init_table[];
+
/**
* Enable output clock for external peripherals
*