#include <asm/types.h>
#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h>
+
/*
* L4 Peripherals - L4 Wakeup and L4 Core now
*/
#define CONTROL_CORE_ID_CODE 0x4A002204
#define CONTROL_WKUP_ID_CODE 0x4AE0C204
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#if defined(CONFIG_DRA7XX)
#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
#else
#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
#endif
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX)
#define DRA7_USB_OTG_SS1_BASE 0x48890000
#define DRA7_USB_OTG_SS1_GLUE_BASE 0x48880000
#define DRA7_USB3_PHY1_PLL_CTRL 0x4A084C00
#define DRA7_USB_OTG_SS2_BASE 0x488D0000
#define DRA7_USB_OTG_SS2_GLUE_BASE 0x488C0000
#define DRA7_USB2_PHY2_POWER 0x4A002E74
+#else
+#define OMAP5XX_USB_OTG_SS_BASE 0x4A030000
+#define OMAP5XX_USB_OTG_SS_GLUE_BASE 0x4A020000
+#define OMAP5XX_USB3_PHY_PLL_CTRL 0x4A084C00
+#define OMAP5XX_USB3_PHY_POWER 0x4A002370
+#define OMAP5XX_USB2_PHY_POWER 0x4A002300
#endif
/* To be verified */
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F
+#define DRA752_CONTROL_ID_CODE_ES2_0 0x2B99002F
#define DRA722_CONTROL_ID_CODE_ES1_0 0x0B9BC02F
+#define DRA722_CONTROL_ID_CODE_ES2_0 0x1B9BC02F
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define DEVICE_TYPE_SHIFT 0x6
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
-#define DEVICE_GP 0x3
/* Output impedance control */
#define ds_120_ohm 0x0
* much larger) and do not, at this time, make use of the additional
* space.
*/
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#if defined(CONFIG_DRA7XX)
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END 0x4037C000
#else
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END 0x4031E000
#endif
-#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000
+#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
/* ABB tranxdone mask */
#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
+#define OMAP_ABB_MM_TXDONE_MASK (0x1 << 31)
+#define OMAP_ABB_IVA_TXDONE_MASK (0x1 << 30)
+#define OMAP_ABB_EVE_TXDONE_MASK (0x1 << 29)
+#define OMAP_ABB_GPU_TXDONE_MASK (0x1 << 28)
/* ABB efuse masks */
#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24)
u32 ctrl_ddr_ctrl_ext_0;
};
+void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits);
+
#endif /* __ASSEMBLY__ */
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+ unsigned int boot_message;
+ unsigned int boot_device_descriptor;
+ unsigned char boot_device;
+ unsigned char reset_reason;
+ unsigned char ch_flags;
+};
+#endif
+
#endif