* Copyright (C) 2009, DENX Software Engineering
* Author: John Rigby <jcrigby@gmail.com
*
- * Based on arch-mx31/mx31-regs.h
+ * Based on arch-mx31/imx-regs.h
* Copyright (C) 2009 Ilya Yanok,
* Emcraft Systems <yanok@emcraft.com>
* and arch-mx27/imx-regs.h
#ifndef _IMX_REGS_H
#define _IMX_REGS_H
-#ifndef __ASSEMBLY__
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
#ifdef CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
#endif
u32 cdlyl; /* delay line cycle length debug */
};
-/* GPIO registers */
-struct gpio_regs {
- u32 dr; /* data */
- u32 dir; /* direction */
- u32 psr; /* pad satus */
- u32 icr1; /* interrupt config 1 */
- u32 icr2; /* interrupt config 2 */
- u32 imr; /* interrupt mask */
- u32 isr; /* interrupt status */
- u32 edge_sel; /* edge select */
-};
-
/* General Purpose Timer (GPT) registers */
struct gpt_regs {
u32 ctrl; /* control */
u32 iim_srev;
u32 iim_prog_p;
u32 res1[0x1f5];
- u32 iim_bank_area0[0x20];
- u32 res2[0xe0];
- u32 iim_bank_area1[0x20];
- u32 res3[0xe0];
- u32 iim_bank_area2[0x20];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_25[0x1a];
+ u32 mac_addr[6];
+};
+
+/* Multi-Layer AHB Crossbar Switch (MAX) registers */
+struct max_regs {
+ u32 mpr0;
+ u32 pad00[3];
+ u32 sgpcr0;
+ u32 pad01[59];
+ u32 mpr1;
+ u32 pad02[3];
+ u32 sgpcr1;
+ u32 pad03[59];
+ u32 mpr2;
+ u32 pad04[3];
+ u32 sgpcr2;
+ u32 pad05[59];
+ u32 mpr3;
+ u32 pad06[3];
+ u32 sgpcr3;
+ u32 pad07[59];
+ u32 mpr4;
+ u32 pad08[3];
+ u32 sgpcr4;
+ u32 pad09[251];
+ u32 mgpcr0;
+ u32 pad10[63];
+ u32 mgpcr1;
+ u32 pad11[63];
+ u32 mgpcr2;
+ u32 pad12[63];
+ u32 mgpcr3;
+ u32 pad13[63];
+ u32 mgpcr4;
+};
+
+/* AHB <-> IP-Bus Interface (AIPS) */
+struct aips_regs {
+ u32 mpr_0_7;
+ u32 mpr_8_15;
};
+
#endif
+#define ARCH_MXC
+
/* AIPS 1 */
#define IMX_AIPS1_BASE (0x43F00000)
#define IMX_MAX_BASE (0x43F04000)
#define IMX_I2C3_BASE (0x43F84000)
#define IMX_CAN1_BASE (0x43F88000)
#define IMX_CAN2_BASE (0x43F8C000)
-#define IMX_UART1_BASE (0x43F90000)
-#define IMX_UART2_BASE (0x43F94000)
+#define UART1_BASE (0x43F90000)
+#define UART2_BASE (0x43F94000)
#define IMX_I2C2_BASE (0x43F98000)
#define IMX_OWIRE_BASE (0x43F9C000)
#define IMX_CSPI1_BASE (0x43FA4000)
/* SPBA */
#define IMX_SPBA_BASE (0x50000000)
#define IMX_CSPI3_BASE (0x50004000)
-#define IMX_UART4_BASE (0x50008000)
-#define IMX_UART3_BASE (0x5000C000)
+#define UART4_BASE (0x50008000)
+#define UART3_BASE (0x5000C000)
#define IMX_CSPI2_BASE (0x50010000)
#define IMX_SSI2_BASE (0x50014000)
#define IMX_ESAI_BASE (0x50018000)
#define IMX_ATA_DMA_BASE (0x50020000)
#define IMX_SIM1_BASE (0x50024000)
#define IMX_SIM2_BASE (0x50028000)
-#define IMX_UART5_BASE (0x5002C000)
+#define UART5_BASE (0x5002C000)
#define IMX_TSC_BASE (0x50030000)
#define IMX_SSI1_BASE (0x50034000)
#define IMX_FEC_BASE (0x50038000)
/* 128K Internal Static RAM */
#define IMX_RAM_BASE (0x78000000)
+#define IMX_RAM_SIZE (128 * 1024)
/* SDRAM BANKS */
#define IMX_SDRAM_BANK0_BASE (0x80000000)
#define WSR_UNLOCK1 0x5555
#define WSR_UNLOCK2 0xAAAA
-/* FUSE bank offsets */
-#define IIM0_MAC 0x1a
+/* Names used in GPIO driver */
+#define GPIO1_BASE_ADDR IMX_GPIO1_BASE
+#define GPIO2_BASE_ADDR IMX_GPIO2_BASE
+#define GPIO3_BASE_ADDR IMX_GPIO3_BASE
+#define GPIO4_BASE_ADDR IMX_GPIO4_BASE
+
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+#define CHIP_REV_1_2 0x12
#endif /* _IMX_REGS_H */
projects / platform / kernel / u-boot.git / blobdiff