Convert CONFIG_USB_OHCI_NEW et al to Kconfig

[platform/kernel/u-boot.git] / arch / arm / include / asm / arch-lpc32xx / config.h

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index 8f6426b..32d68cb 100644 (file)
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -1,59 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common definitions for LPC32XX board configurations
  *
- * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
  */
 
 #ifndef _LPC32XX_CONFIG_H
 #define _LPC32XX_CONFIG_H
 
-/* Basic CPU architecture */
-#define CONFIG_ARCH_CPU_INIT
 
-#define CONFIG_NR_DRAM_BANKS_MAX       2
+/* Basic CPU architecture */
 
 /* UART configuration */
-#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_CONS_INDEX              (CONFIG_SYS_LPC32XX_UART - 2)
-#elif  (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
-       (CONFIG_SYS_LPC32XX_UART == 7)
+#if    (CONFIG_CONS_INDEX == 1) || (CONFIG_CONS_INDEX == 2) || \
+       (CONFIG_CONS_INDEX == 7)
+#if !defined(CONFIG_LPC32XX_HSUART)
 #define CONFIG_LPC32XX_HSUART
-#else
-#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
 #endif
-
-#if defined(CONFIG_SYS_NS16550_SERIAL)
-#define CONFIG_SYS_NS16550
-
-#define CONFIG_SYS_NS16550_REG_SIZE    -4
-#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
-
-#define CONFIG_SYS_NS16550_COM1                UART3_BASE
-#define CONFIG_SYS_NS16550_COM2                UART4_BASE
-#define CONFIG_SYS_NS16550_COM3                UART5_BASE
-#define CONFIG_SYS_NS16550_COM4                UART6_BASE
 #endif
 
-#if defined(CONFIG_LPC32XX_HSUART)
-#if    CONFIG_SYS_LPC32XX_UART == 1
-#define HS_UART_BASE                   HS_UART1_BASE
-#elif  CONFIG_SYS_LPC32XX_UART == 2
-#define HS_UART_BASE                   HS_UART2_BASE
-#else  /* CONFIG_SYS_LPC32XX_UART == 7 */
-#define HS_UART_BASE                   HS_UART7_BASE
-#endif
+#if !defined(CONFIG_SYS_NS16550_CLK)
+#define CONFIG_SYS_NS16550_CLK         13000000
 #endif
 
 #define CONFIG_SYS_BAUDRATE_TABLE      \
                { 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
 
+/* Ethernet */
+#define LPC32XX_ETH_BASE ETHERNET_BASE
+
+/* NAND */
+#if defined(CONFIG_NAND_LPC32XX_SLC)
+#define NAND_LARGE_BLOCK_PAGE_SIZE     0x800
+#define NAND_SMALL_BLOCK_PAGE_SIZE     0x200
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_ECCPOS         { 10, 11, 12, 13, 14, 15, }
+#else
+#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
+#endif
+
+#define CONFIG_SYS_NAND_ECCSIZE                0x100
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#endif /* CONFIG_NAND_LPC32XX_SLC */
+
 /* NOR Flash */
-#if defined(CONFIG_SYS_FLASH_CFI)
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_PROTECTION
+
+/* USB OHCI */
+#if defined(CONFIG_USB_OHCI_LPC32XX)
+#define CONFIG_SYS_USB_OHCI_REGS_BASE          USB_BASE
 #endif
 
 #endif /* _LPC32XX_CONFIG_H */