/*
* dts file for Xilinx ZynqMP ZCU111
*
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u67 {
+ compatible = "iio-hwmon";
+ io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+ };
+ ina226-u59 {
+ compatible = "iio-hwmon";
+ io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+ };
+ ina226-u61 {
+ compatible = "iio-hwmon";
+ io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+ };
+ ina226-u60 {
+ compatible = "iio-hwmon";
+ io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+ };
+ ina226-u64 {
+ compatible = "iio-hwmon";
+ io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+ };
+ ina226-u69 {
+ compatible = "iio-hwmon";
+ io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+ };
+ ina226-u66 {
+ compatible = "iio-hwmon";
+ io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u63 {
+ compatible = "iio-hwmon";
+ io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+ };
+ ina226-u3 {
+ compatible = "iio-hwmon";
+ io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+ };
+ ina226-u71 {
+ compatible = "iio-hwmon";
+ io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u73 {
+ compatible = "iio-hwmon";
+ io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
};
&dcc {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@c {
+ phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
- ina226@40 { /* u67 */
+ u67: ina226@40 { /* u67 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u67";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u59 */
+ u59: ina226@41 { /* u59 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u59";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u61 */
+ u61: ina226@42 { /* u61 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u61";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u60 */
+ u60: ina226@43 { /* u60 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u60";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u64 */
+ u64: ina226@45 { /* u64 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u64";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u69 */
+ u69: ina226@46 { /* u69 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u69";
reg = <0x46>;
shunt-resistor = <2000>;
};
- ina226@47 { /* u66 */
+ u66: ina226@47 { /* u66 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u66";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@48 { /* u65 */
+ u65: ina226@48 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x48>;
shunt-resistor = <5000>;
};
- ina226@49 { /* u63 */
+ u63: ina226@49 { /* u63 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u63";
reg = <0x49>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u3 */
+ u3: ina226@4a { /* u3 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u3";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u71 */
+ u71: ina226@4b { /* u71 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u71";
reg = <0x4b>;
shunt-resistor = <5000>;
};
- ina226@4c { /* u77 */
+ u77: ina226@4c { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x4c>;
shunt-resistor = <5000>;
};
- ina226@4d { /* u73 */
+ u73: ina226@4d { /* u73 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u73";
reg = <0x4d>;
shunt-resistor = <5000>;
};
- ina226@4e { /* u79 */
+ u79: ina226@4e { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x4e>;
shunt-resistor = <5000>;
};
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */
- #clock-cells = <0>;
+ irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
compatible = "infineon,irps5401";
reg = <0x43>;
};
- irps5401_44: irps54012@44 { /* IRPS5401 - u55 */
- #clock-cells = <0>;
+ irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
compatible = "infineon,irps5401";
reg = <0x44>;
};
- irps5401_45: irps54012@45 { /* IRPS5401 - u57 */
- #clock-cells = <0>;
+ irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
compatible = "infineon,irps5401";
reg = <0x45>;
};
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <156250000>;
- clock-frequency = <148500000>;
+ clock-frequency = <156250000>;
clock-output-names = "si570_mgt";
};
};
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
- dev@19 { /* u-boot detection FIXME */
- compatible = "xxx";
- reg = <0x19>;
- };
- dev@30 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x30>;
- };
- dev@35 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x35>;
- };
- dev@36 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x36>;
- };
- dev@51 { /* u-boot detection - maybe SPD */
- compatible = "xxx";
- reg = <0x51>;
- };
};
i2c@4 {
#address-cells = <1>;
status = "okay";
is-dual = <1>;
flash@0 {
- compatible = "m25p80", "spi-flash"; /* 32MB */
+ compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
- partition@qspi-fsbl-uboot { /* for testing purpose */
+ partition@0 { /* for testing purpose */
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
- partition@qspi-linux { /* for testing purpose */
+ partition@100000 { /* for testing purpose */
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
- partition@qspi-device-tree { /* for testing purpose */
+ partition@600000 { /* for testing purpose */
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
- partition@qspi-rootfs { /* for testing purpose */
+ partition@620000 { /* for testing purpose */
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ /*
+ * This property should be removed for supporting UHS mode
+ */
+ no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&serdes {