+// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP ZCU102 RevA
*
- * (C) Copyright 2015, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
#include <dt-bindings/phy/phy.h>
/ {
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
+ xlnx,eeprom = &eeprom;
};
memory@0 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
sw19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- linux,code = <108>; /* down */
- gpio-key,wakeup;
+ linux,code = <KEY_DOWN>;
+ wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+ };
};
&can1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_default>;
};
&dcc {
status = "okay";
};
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
};
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gem3_default>;
- phy0: phy@21 {
+ phy0: ethernet-phy@21 {
reg = <21>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
};
};
&gpio {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_default>;
};
&gpu {
&i2c0 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c0_default>;
- pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
tca6416_u97: gpio@20 {
- /*
- * Enable all GTs to out from U-Boot
- * i2c mw 20 6 0 - setup IO to output
- * i2c mw 20 2 ef - setup output values on pins 0-7
- * i2c mw 20 3 ff - setup output values on pins 10-17
- */
compatible = "ti,tca6416";
reg = <0x20>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - PS_GTR_LAN_SEL0
- * 1 - PS_GTR_LAN_SEL1
- * 2 - PS_GTR_LAN_SEL2
- * 3 - PS_GTR_LAN_SEL3
- * 4 - PCI_CLK_DIR_SEL
- * 5 - IIC_MUX_RESET_B
- * 6 - GEM3_EXP_RESET_B
- * 7, 10 - 17 - not connected
- */
-
- gtr_sel0 {
+ gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+ "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+ "", "", "", "", "", "", "", "", "";
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
};
};
- tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ tca6416_u61: gpio@21 {
compatible = "ti,tca6416";
reg = <0x21>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - VCCPSPLL_EN
- * 1 - MGTRAVCC_EN
- * 2 - MGTRAVTT_EN
- * 3 - VCCPSDDRPLL_EN
- * 4 - MIO26_PMU_INPUT_LS
- * 5 - PL_PMBUS_ALERT
- * 6 - PS_PMBUS_ALERT
- * 7 - MAXIM_PMBUS_ALERT
- * 10 - PL_DDR4_VTERM_EN
- * 11 - PL_DDR4_VPP_2V5_EN
- * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
- * 13 - PS_DIMM_SUSPEND_EN
- * 14 - PS_DDR4_VTERM_EN
- * 15 - PS_DDR4_VPP_2V5_EN
- * 16 - 17 - not connected
- */
+ gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+ "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+ "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+ "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
};
- i2cswitch@75 { /* u60 */
+ i2c-mux@75 { /* u60 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
- i2c@0 { /* i2c mw 75 0 1 */
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
};
- i2c@1 { /* i2c mw 75 0 1 */
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
};
- i2c@2 { /* i2c mw 75 0 1 */
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* MAXIM_PMBUS - 00 */
max15301@a { /* u46 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0xa>;
};
max15303@b { /* u4 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0xb>;
};
max15303@10 { /* u13 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x10>;
};
max15301@13 { /* u47 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0x13>;
};
max15303@14 { /* u7 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x14>;
};
max15303@15 { /* u6 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x15>;
};
max15303@16 { /* u10 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x16>;
};
max15303@17 { /* u9 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x17>;
};
max15301@18 { /* u63 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0x18>;
};
max15303@1a { /* u49 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x1a>;
};
max15303@1d { /* u18 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x1d>;
};
max15303@20 { /* u8 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
status = "disabled"; /* unreachable */
reg = <0x20>;
};
-
-/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
-*/
- max20751@72 { /* u95 FIXME - not detected */
- compatible = "max20751";
+ max20751@72 { /* u95 */
+ compatible = "maxim,max20751";
reg = <0x72>;
};
- max20751@73 { /* u96 FIXME - not detected */
- compatible = "max20751";
+ max20751@73 { /* u96 */
+ compatible = "maxim,max20751";
reg = <0x73>;
};
};
/* Bus 3 is not connected */
};
-
- /* FIXME PMOD - j160 */
- /* FIXME MSP430F - u41 - not detected */
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-
- /* FIXME PL i2c via PCA9306 - u45 */
- /* FIXME MSP430 - u41 - not detected */
- i2cswitch@74 { /* u34 */
+
+ /* PL i2c via PCA9306 - u45 */
+ i2c-mux@74 { /* u34 */
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
- i2c@0 { /* i2c mw 74 0 1 */
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
* 768B - 1024B address 0x57
*/
eeprom: eeprom@54 { /* u23 */
- compatible = "at,24c08";
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};
- i2c@1 { /* i2c mw 74 0 2 */
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- si5341: clock-generator1@36 { /* SI5341 - u69 */
- compatible = "si5341";
+ si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
};
};
- i2c@2 { /* i2c mw 74 0 4 */
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ si570_1: clock-generator@5d { /* USER SI570 - u42 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
- i2c@3 { /* i2c mw 74 0 8 */
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
- si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
- i2c@4 { /* i2c mw 74 0 10 */
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator4@69 {/* SI5328 - u20 */
+ si5328: clock-generator@69 {/* SI5328 - u20 */
compatible = "silabs,si5328";
reg = <0x69>;
/*
/* 5 - 7 unconnected */
};
- i2cswitch@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9548"; /* u135 */
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* SYSMON */
};
- i2c@3 { /* i2c mw 75 0 8 */
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
- dev@19 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x19>;
- };
- dev@30 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x30>;
- };
- dev@35 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x35>;
- };
- dev@36 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x36>;
- };
- dev@51 { /* u-boot detection - maybe SPD */
- compatible = "xxx";
- reg = <0x51>;
- };
};
i2c@4 {
#address-cells = <1>;
};
};
-&pinctrl0 {
- status = "okay";
- pinctrl_i2c0_default: i2c0-default {
- mux {
- groups = "i2c0_3_grp";
- function = "i2c0";
- };
-
- conf {
- groups = "i2c0_3_grp";
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c0_gpio: i2c0-gpio {
- mux {
- groups = "gpio0_14_grp", "gpio0_15_grp";
- function = "gpio0";
- };
-
- conf {
- groups = "gpio0_14_grp", "gpio0_15_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c1_default: i2c1-default {
- mux {
- groups = "i2c1_4_grp";
- function = "i2c1";
- };
-
- conf {
- groups = "i2c1_4_grp";
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c1_gpio: i2c1-gpio {
- mux {
- groups = "gpio0_16_grp", "gpio0_17_grp";
- function = "gpio0";
- };
-
- conf {
- groups = "gpio0_16_grp", "gpio0_17_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_uart0_default: uart0-default {
- mux {
- groups = "uart0_4_grp";
- function = "uart0";
- };
-
- conf {
- groups = "uart0_4_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO18";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO19";
- bias-disable;
- };
- };
-
- pinctrl_uart1_default: uart1-default {
- mux {
- groups = "uart1_5_grp";
- function = "uart1";
- };
-
- conf {
- groups = "uart1_5_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO21";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO20";
- bias-disable;
- };
- };
-
- pinctrl_usb0_default: usb0-default {
- mux {
- groups = "usb0_0_grp";
- function = "usb0";
- };
-
- conf {
- groups = "usb0_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO52", "MIO53", "MIO55";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
- "MIO60", "MIO61", "MIO62", "MIO63";
- bias-disable;
- };
- };
-
- pinctrl_gem3_default: gem3-default {
- mux {
- function = "ethernet3";
- groups = "ethernet3_0_grp";
- };
-
- conf {
- groups = "ethernet3_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
- "MIO75";
- bias-high-impedance;
- low-power-disable;
- };
-
- conf-tx {
- pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
- "MIO69";
- bias-disable;
- low-power-enable;
- };
-
- mux-mdio {
- function = "mdio3";
- groups = "mdio3_0_grp";
- };
-
- conf-mdio {
- groups = "mdio3_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- bias-disable;
- };
- };
-
- pinctrl_can1_default: can1-default {
- mux {
- function = "can1";
- groups = "can1_6_grp";
- };
-
- conf {
- groups = "can1_6_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO25";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO24";
- bias-disable;
- };
- };
-
- pinctrl_sdhci1_default: sdhci1-default {
- mux {
- groups = "sdio1_0_grp";
- function = "sdio1";
- };
-
- conf {
- groups = "sdio1_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- bias-disable;
- };
-
- mux-cd {
- groups = "sdio1_0_cd_grp";
- function = "sdio1_cd";
- };
-
- conf-cd {
- groups = "sdio1_0_cd_grp";
- bias-high-impedance;
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- mux-wp {
- groups = "sdio1_0_wp_grp";
- function = "sdio1_wp";
- };
-
- conf-wp {
- groups = "sdio1_0_wp_grp";
- bias-high-impedance;
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_gpio_default: gpio-default {
- mux-sw {
- function = "gpio0";
- groups = "gpio0_22_grp", "gpio0_23_grp";
- };
-
- conf-sw {
- groups = "gpio0_22_grp", "gpio0_23_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- mux-msp {
- function = "gpio0";
- groups = "gpio0_13_grp", "gpio0_38_grp";
- };
-
- conf-msp {
- groups = "gpio0_13_grp", "gpio0_38_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-pull-up {
- pins = "MIO22", "MIO23";
- bias-pull-up;
- };
-
- conf-pull-none {
- pins = "MIO13", "MIO38";
- bias-disable;
- };
- };
-};
-
&pcie {
status = "okay";
};
status = "okay";
is-dual = <1>;
flash@0 {
- compatible = "m25p80"; /* 32MB */
+ compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
- partition@qspi-fsbl-uboot { /* for testing purpose */
+ partition@0 { /* for testing purpose */
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
- partition@qspi-linux { /* for testing purpose */
+ partition@100000 { /* for testing purpose */
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
- partition@qspi-device-tree { /* for testing purpose */
+ partition@600000 { /* for testing purpose */
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
- partition@qspi-rootfs { /* for testing purpose */
+ partition@620000 { /* for testing purpose */
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdhci1_default>;
- no-1-8-v; /* for 1.0 silicon */
- xlnx,mio_bank = <1>;
+ /*
+ * 1.0 revision has level shifter and this property should be
+ * removed for supporting UHS mode
+ */
+ no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&serdes {
&uart0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_default>;
};
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0_default>;
};
&dwc3_0 {
status = "okay";
};
-&xilinx_drm {
- status = "okay";
- clocks = <&si570_1>;
-};
-
-&xlnx_dp {
- status = "okay";
-};
-
-&xlnx_dp_sub {
+&zynqmp_dpsub {
status = "okay";
- xlnx,vid-clk-pl;
};
-&xlnx_dp_snd_pcm0 {
+&zynqmp_dp_snd_codec0 {
status = "okay";
};
-&xlnx_dp_snd_pcm1 {
+&zynqmp_dp_snd_pcm0 {
status = "okay";
};
-&xlnx_dp_snd_card {
+&zynqmp_dp_snd_pcm1 {
status = "okay";
};
-&xlnx_dp_snd_codec0 {
+&zynqmp_dp_snd_card0 {
status = "okay";
};