+// SPDX-License-Identifier: GPL-2.0+
/*
- * dts file for Xilinx ZynqMP ZCU102
+ * dts file for Xilinx ZynqMP ZCU102 RevA
*
- * (C) Copyright 2015, Xilinx, Inc.
+ * (C) Copyright 2015 - 2018, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU102 RevA";
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
sw19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- linux,code = <108>; /* down */
+ linux,code = <KEY_DOWN>;
gpio-key,wakeup;
autorepeat;
};
compatible = "gpio-leds";
heartbeat_led {
label = "heartbeat";
- gpios = <&gpio 23 0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
status = "okay";
};
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
- xlnx,overfetch; /* for testing purpose */
- xlnx,ratectrl = <0>; /* for testing purpose */
- xlnx,src-issue = <31>;
};
&fpd_dma_chan2 {
status = "okay";
- xlnx,ratectrl = <100>; /* for testing purpose */
- xlnx,src-issue = <4>; /* for testing purpose */
};
&fpd_dma_chan3 {
&fpd_dma_chan4 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan5 {
&fpd_dma_chan6 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan7 {
&fpd_dma_chan8 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&gem3 {
status = "okay";
- local-mac-address = [00 0a 35 00 02 90];
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: phy@21 {
clock-frequency = <400000>;
tca6416_u97: gpio@20 {
- /*
- * Enable all GTs to out from U-Boot
- * i2c mw 20 6 0 - setup IO to output
- * i2c mw 20 2 ef - setup output values on pins 0-7
- * i2c mw 20 3 ff - setup output values on pins 10-17
- */
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
gtr_sel0 {
gpio-hog;
gpios = <0 0>;
- output-high; /* PCIE = 0, DP = 1 */
+ output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
gtr_sel1 {
};
};
- tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ tca6416_u61: gpio@21 {
compatible = "ti,tca6416";
reg = <0x21>;
gpio-controller;
*/
};
- i2cswitch@75 { /* u60 */
+ i2c-mux@75 { /* u60 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
- i2c@0 { /* i2c mw 75 0 1 */
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
shunt-resistor = <5000>;
};
};
- i2c@1 { /* i2c mw 75 0 1 */
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
shunt-resistor = <5000>;
};
};
- i2c@2 { /* i2c mw 75 0 1 */
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* MAXIM_PMBUS - 00 */
max15301@a { /* u46 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0xa>;
};
max15303@b { /* u4 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0xb>;
};
max15303@10 { /* u13 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x10>;
};
max15301@13 { /* u47 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0x13>;
};
max15303@14 { /* u7 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x14>;
};
max15303@15 { /* u6 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x15>;
};
max15303@16 { /* u10 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x16>;
};
max15303@17 { /* u9 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x17>;
};
max15301@18 { /* u63 */
- compatible = "max15301";
+ compatible = "maxim,max15301";
reg = <0x18>;
};
max15303@1a { /* u49 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x1a>;
};
max15303@1d { /* u18 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
reg = <0x1d>;
};
max15303@20 { /* u8 */
- compatible = "max15303";
+ compatible = "maxim,max15303";
status = "disabled"; /* unreachable */
reg = <0x20>;
};
-/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
-*/
- max20751@72 { /* u95 FIXME - not detected */
- compatible = "max20751";
+ max20751@72 { /* u95 */
+ compatible = "maxim,max20751";
reg = <0x72>;
};
- max20751@73 { /* u96 FIXME - not detected */
- compatible = "max20751";
+ max20751@73 { /* u96 */
+ compatible = "maxim,max20751";
reg = <0x73>;
};
};
/* Bus 3 is not connected */
};
-
- /* FIXME PMOD - j160 */
- /* FIXME MSP430F - u41 - not detected */
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
- /* FIXME PL i2c via PCA9306 - u45 */
- /* FIXME MSP430 - u41 - not detected */
- i2cswitch@74 { /* u34 */
+
+ /* PL i2c via PCA9306 - u45 */
+ i2c-mux@74 { /* u34 */
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
- i2c@0 { /* i2c mw 74 0 1 */
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
* 512B - 768B address 0x56
* 768B - 1024B address 0x57
*/
- eeprom@54 { /* u23 */
- compatible = "at,24c08";
+ eeprom: eeprom@54 { /* u23 */
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};
- i2c@1 { /* i2c mw 74 0 2 */
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- si5341: clock-generator1@36 { /* SI5341 - u69 */
- compatible = "si5341";
+ si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
};
};
- i2c@2 { /* i2c mw 74 0 4 */
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ si570_1: clock-generator@5d { /* USER SI570 - u42 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
- i2c@3 { /* i2c mw 74 0 8 */
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
- si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
- i2c@4 { /* i2c mw 74 0 10 */
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator4@69 {/* SI5328 - u20 */
+ si5328: clock-generator@69 {/* SI5328 - u20 */
compatible = "silabs,si5328";
reg = <0x69>;
+ /*
+ * Chip has interrupt present connected to PL
+ * interrupt-parent = <&>;
+ * interrupts = <>;
+ */
};
};
/* 5 - 7 unconnected */
};
- i2cswitch@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9548"; /* u135 */
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* SYSMON */
};
- i2c@3 { /* i2c mw 75 0 8 */
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
- dev@19 { /* u-boot detection */
- compatible = "xxx";
+ dev@19 {
reg = <0x19>;
};
- dev@30 { /* u-boot detection */
- compatible = "xxx";
+ dev@30 {
reg = <0x30>;
};
- dev@35 { /* u-boot detection */
- compatible = "xxx";
+ dev@35 {
reg = <0x35>;
};
- dev@36 { /* u-boot detection */
- compatible = "xxx";
+ dev@36 {
reg = <0x36>;
};
- dev@51 { /* u-boot detection - maybe SPD */
- compatible = "xxx";
+ dev@51 {
reg = <0x51>;
};
};
};
&pcie {
-/* status = "okay"; */
+ status = "okay";
};
&qspi {
status = "okay";
is-dual = <1>;
flash@0 {
- compatible = "m25p80"; /* 32MB */
+ compatible = "m25p80", "spi-flash"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
};
/* SD1 with level shifter */
xlnx,mio_bank = <1>;
};
+&serdes {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
&dwc3_0 {
status = "okay";
dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+ maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
};
&xilinx_drm {