Merge tag 'u-boot-imx-20200825' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / arch / arm / dts / zynqmp-zc1751-xm015-dc1.dts

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 8824f5c..e2428ec 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm015-dc1
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -75,7 +75,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };
@@ -108,19 +108,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };
@@ -148,14 +148,17 @@
 &sdhci0 {
        status = "okay";
        bus-width = <8>;
-       xlnx,mio_bank = <0>;
+       xlnx,mio-bank = <0>;
 };
 
 /* SD1 with level shifter */
 &sdhci1 {
        status = "okay";
-       no-1-8-v;       /* for 1.0 silicon */
-       xlnx,mio_bank = <1>;
+       /*
+        * This property should be removed for supporting UHS mode
+        */
+       no-1-8-v;
+       xlnx,mio-bank = <1>;
 };
 
 &uart0 {
@@ -172,32 +175,23 @@
        dr_mode = "host";
 };
 
-&xilinx_drm {
+&zynqmp_dpsub {
        status = "okay";
 };
 
-&xlnx_dp {
+&zynqmp_dp_snd_pcm0 {
        status = "okay";
 };
 
-&xlnx_dp_sub {
+&zynqmp_dp_snd_pcm1 {
        status = "okay";
-       xlnx,vid-clk-pl;
 };
 
-&xlnx_dp_snd_pcm0 {
+&zynqmp_dp_snd_card0 {
        status = "okay";
 };
 
-&xlnx_dp_snd_pcm1 {
-       status = "okay";
-};
-
-&xlnx_dp_snd_card {
-       status = "okay";
-};
-
-&xlnx_dp_snd_codec0 {
+&zynqmp_dp_snd_codec0 {
        status = "okay";
 };