Merge tag 'u-boot-imx-20200825' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / arch / arm / dts / uniphier-ld20-ref.dts

diff --git a/arch/arm/dts/uniphier-ld20-ref.dts b/arch/arm/dts/uniphier-ld20-ref.dts
index 2bcab96..39ee279 100644 (file)
--- a/arch/arm/dts/uniphier-ld20-ref.dts
+++ b/arch/arm/dts/uniphier-ld20-ref.dts
@@ -1,16 +1,14 @@
-/*
- * Device Tree Source for UniPhier LD20 Reference Board
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 /dts-v1/;
-/include/ "uniphier-ld20.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
 
 / {
        model = "UniPhier LD20 Reference Board";
@@ -22,7 +20,7 @@
 
        aliases {
                serial0 = &serial0;
-               serial1 = &serial1;
+               serial1 = &serialsc;
                serial2 = &serial2;
                serial3 = &serial3;
                i2c0 = &i2c0;
@@ -31,6 +29,7 @@
                i2c3 = &i2c3;
                i2c4 = &i2c4;
                i2c5 = &i2c5;
+               ethernet0 = &eth;
        };
 
        memory@80000000 {
@@ -40,22 +39,48 @@
 };
 
 &ethsc {
-       interrupts = <0 48 4>;
+       interrupts = <0 8>;
+};
+
+&serialsc {
+       interrupts = <0 8>;
 };
 
 &serial0 {
        status = "okay";
 };
 
+&gpio {
+       xirq0 {
+               gpio-hog;
+               gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+               input;
+       };
+};
+
 &i2c0 {
        status = "okay";
 };
 
-/* for U-Boot only */
-&serial0 {
-       u-boot,dm-pre-reloc;
+&eth {
+       status = "okay";
+       phy-handle = <&ethphy>;
 };
 
-&pinctrl_uart0 {
-       u-boot,dm-pre-reloc;
+&mdio {
+       ethphy: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&pinctrl_ether_rgmii {
+       tx {
+               pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+                      "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+               drive-strength = <9>;
+       };
+};
+
+&usb {
+       status = "okay";
 };