ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1

[platform/kernel/u-boot.git] / arch / arm / dts / sun8i-a83t-cubietruck-plus.dts

diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
index 5dba4fc..e26af7c 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,25 +60,36 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
-               blue {
+               led-0 {
                        label = "cubietruck-plus:blue:usr";
                        gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
                };
 
-               orange {
+               led-1 {
                        label = "cubietruck-plus:orange:usr";
                        gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
                };
 
-               white {
+               led-2 {
                        label = "cubietruck-plus:white:usr";
                        gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
                };
 
-               green {
+               led-3 {
                        label = "cubietruck-plus:green:usr";
                        gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
                };
@@ -90,7 +101,7 @@
                initial-mode = <1>; /* initialize in HUB mode */
                disabled-ports = <1>;
                intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-               reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+               reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
                connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
                refclk-frequency = <19200000>;
        };
@@ -145,6 +156,18 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        /* GL830 USB-to-SATA bridge here */
        status = "okay";
@@ -160,10 +183,20 @@
        pinctrl-0 = <&emac_rgmii_pins>;
        phy-supply = <&reg_dldo4>;
        phy-handle = <&rgmii_phy>;
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
+       status = "okay";
+};
+
+&hdmi {
        status = "okay";
 };
 
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &mdio {
        rgmii_phy: ethernet-phy@1 {
                compatible = "ethernet-phy-ieee802.3-c22";
@@ -239,6 +272,14 @@
 
 #include "axp81x.dtsi"
 
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
 &reg_aldo1 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;
@@ -386,11 +427,37 @@
        status = "okay";
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm4330-bt";
+               clocks = <&ac100_rtc 1>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_dcdc1>;
+               vddio-supply = <&reg_sw>;
+               device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+               host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+               shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+       };
+};
+
 &usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
        status = "okay";
 };
 
 &usbphy {
+       usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_drivevbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";