*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
- states = <1800000 0x1 2900000 0x0>;
+ states = <1800000 0x1>,
+ <2900000 0x0>;
+ };
+};
+
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ pinctrl-0 = <&adc1_in6_pins_a>;
+ pinctrl-names = "default";
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+ adc1: adc@0 {
+ st,adc-channels = <0 1 6>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-nsecs = <400>;
+ status = "okay";
+ };
+};
+
+&dac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+ dac1: dac@1 {
+ status = "okay";
+ };
+ dac2: dac@2 {
+ status = "okay";
};
};
};
&i2c4 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_pins_a>;
+ pinctrl-1 = <&i2c4_pins_sleep_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
+ clock-frequency = <400000>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
vddcore: buck1 {
regulator-name = "vddcore";
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
status = "okay";
};
-&pwr {
- pwr-regulators {
- vdd-supply = <&vdd>;
- vdd_3v3_usbfs-supply = <&vdd_usb>;
- };
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
};
&rng1 {
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
- broken-cd;
+ cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
st,sig-dir;
st,neg-edge;
st,use-ckin;
st,neg-edge;
bus-width = <8>;
vmmc-supply = <&v3v3>;
- vqmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
mmc-ddr-3_3v;
status = "okay";
};