+// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
+#include <dt-bindings/mfd/stm32h7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <25000000>;
+ clock-frequency = <0>;
};
clk_lse: clk-lse {
};
soc {
- rcc: rcc@58024400 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "st,stm32h743-rcc", "st,stm32-rcc";
- reg = <0x58024400 0x400>;
- clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>, <&clk_hsi>, <&clk_csi>;
- st,syscfg = <&pwrcfg>;
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&rcc TIM5_CK>;
};
- usart1: serial@40011000 {
- compatible = "st,stm32h7-usart", "st,stm32h7-uart";
- reg = <0x40011000 0x400>;
- interrupts = <37>;
+ lptimer1: timer@40002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40002400 0x400>;
+ clocks = <&rcc LPTIM1_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ spi2: spi@40003800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
+ clocks = <&rcc SPI2_CK>;
+ status = "disabled";
+
+ };
+
+ spi3: spi@40003c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x40003c00 0x400>;
+ interrupts = <51>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
+ clocks = <&rcc SPI3_CK>;
status = "disabled";
- clocks = <&rcc USART1_CK>;
};
usart2: serial@40004400 {
- compatible = "st,stm32h7-usart", "st,stm32h7-uart";
+ compatible = "st,stm32h7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
clocks = <&rcc USART2_CK>;
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
- clocks = <&rcc TIM5_CK>;
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
+ clocks = <&rcc I2C1_CK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005800 0x400>;
+ interrupts = <33>,
+ <34>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
+ clocks = <&rcc I2C2_CK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40005C00 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005C00 0x400>;
+ interrupts = <72>,
+ <73>;
+ resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
+ clocks = <&rcc I2C3_CK>;
+ status = "disabled";
+ };
+
+ dac: dac@40007400 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40007400 0x400>;
+ clocks = <&rcc DAC12_CK>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ status = "disabled";
+ clocks = <&rcc USART1_CK>;
+ };
+
+ spi1: spi@40013000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x40013000 0x400>;
+ interrupts = <35>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
+ clocks = <&rcc SPI1_CK>;
+ status = "disabled";
+ };
+
+ spi4: spi@40013400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x40013400 0x400>;
+ interrupts = <84>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
+ clocks = <&rcc SPI4_CK>;
+ status = "disabled";
+ };
+
+ spi5: spi@40015000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x40015000 0x400>;
+ interrupts = <85>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
+ clocks = <&rcc SPI5_CK>;
+ status = "disabled";
+ };
+
+ dma1: dma-controller@40020000 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020000 0x400>;
+ interrupts = <11>,
+ <12>,
+ <13>,
+ <14>,
+ <15>,
+ <16>,
+ <17>,
+ <47>;
+ clocks = <&rcc DMA1_CK>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ status = "disabled";
+ };
+
+ dma2: dma-controller@40020400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&rcc DMA2_CK>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ status = "disabled";
+ };
+
+ dmamux1: dma-router@40020800 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x40020800 0x1c>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ clocks = <&rcc DMA1_CK>;
+ };
+
+ adc_12: adc@40022000 {
+ compatible = "st,stm32h7-adc-core";
+ reg = <0x40022000 0x400>;
+ interrupts = <18>;
+ clocks = <&rcc ADC12_CK>;
+ clock-names = "bus";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_12>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x100>;
+ interrupt-parent = <&adc_12>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+ };
+
+ usbotg_hs: usb@40040000 {
+ compatible = "st,stm32f7-hsotg";
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc USB1OTG_CK>;
+ clock-names = "otg";
+ g-rx-fifo-size = <256>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ usbotg_fs: usb@40080000 {
+ compatible = "st,stm32f4x9-fsotg";
+ reg = <0x40080000 0x40000>;
+ interrupts = <101>;
+ clocks = <&rcc USB2OTG_CK>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ ltdc: display-controller@50001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x50001000 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
+ clocks = <&rcc LTDC_CK>;
+ clock-names = "lcd";
+ status = "disabled";
+ };
+
+ mdma1: dma-controller@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&rcc MDMA_CK>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ };
+
+ sdmmc1: sdmmc@52007000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x52007000 0x1000>;
+ interrupts = <49>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_CK>;
+ clock-names = "apb_pclk";
+ resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ };
+
+ exti: interrupt-controller@58000000 {
+ compatible = "st,stm32h7-exti";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x58000000 0x400>;
+ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
+ };
+
+ syscfg: syscon@58000400 {
+ compatible = "st,stm32-syscfg", "syscon";
+ reg = <0x58000400 0x400>;
+ };
+
+ spi6: spi@58001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x58001400 0x400>;
+ interrupts = <86>;
+ resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
+ clocks = <&rcc SPI6_CK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@58001C00 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58001C00 0x400>;
+ interrupts = <95>,
+ <96>;
+ resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
+ clocks = <&rcc I2C4_CK>;
+ status = "disabled";
+ };
+
+ lptimer2: timer@58002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002400 0x400>;
+ clocks = <&rcc LPTIM2_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@58002800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002800 0x400>;
+ clocks = <&rcc LPTIM3_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@58002c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002c00 0x400>;
+ clocks = <&rcc LPTIM4_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@58003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58003000 0x400>;
+ clocks = <&rcc LPTIM5_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: regulator@58003c00 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x58003C00 0x8>;
+ clocks = <&rcc VREF_CK>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ status = "disabled";
+ };
+
+ rtc: rtc@58004000 {
+ compatible = "st,stm32h7-rtc";
+ reg = <0x58004000 0x400>;
+ clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+ clock-names = "pclk", "rtc_ck";
+ assigned-clocks = <&rcc RTC_CK>;
+ assigned-clock-parents = <&rcc LSE_CK>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
+ status = "disabled";
+ };
+
+ rcc: reset-clock-controller@58024400 {
+ compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+ reg = <0x58024400 0x400>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+ st,syscfg = <&pwrcfg>;
};
pwrcfg: power-config@58024800 {
- compatible = "syscon";
+ compatible = "st,stm32-power-config", "syscon";
reg = <0x58024800 0x400>;
};
- fmc: fmc@52004000 {
- compatible = "st,stm32h7-fmc";
- reg = <0x52004000 0x1000>;
- clocks = <&rcc FMC_CK>;
- };
+ adc_3: adc@58026000 {
+ compatible = "st,stm32h7-adc-core";
+ reg = <0x58026000 0x400>;
+ interrupts = <127>;
+ clocks = <&rcc ADC3_CK>;
+ clock-names = "bus";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
- clk_hsi: clk-hsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <64000000>;
+ adc3: adc@0 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
};
- clk_csi: clk-csi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <4000000>;
+ mac: ethernet@40028000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <61>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ status = "disabled";
};
};
};
projects / platform / kernel / u-boot.git / blobdiff