+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for common parts of Salvator-X board variants
*
* Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
*/
/*
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
aliases {
serial0 = &scif2;
- serial1 = &scif1;
+ serial1 = &hscif1;
ethernet0 = &avb;
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
};
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ };
+ };
+ };
+
+ hdmi1-out {
+ compatible = "hdmi-connector";
+ label = "HDMI1 OUT";
+ type = "a";
+
+ port {
+ hdmi1_con: endpoint {
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW4-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW4-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW4-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW4-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-a {
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_A>;
+ label = "TSW0";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_B>;
+ label = "TSW1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_C>;
+ label = "TSW2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-always-on;
};
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
+ sound_card: sound {
+ compatible = "audio-graph-card";
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
+ label = "rcar-sound";
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
+ dais = <&rsnd_port0>;
};
vbus0_usb2: regulator-vbus0-usb2 {
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi3: regulator-vcc-sdhi3 {
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- hdmi0-out {
- compatible = "hdmi-connector";
- label = "HDMI0 OUT";
- type = "a";
-
- port {
- hdmi0_con: endpoint {
- };
- };
- };
-
- hdmi1-out {
- compatible = "hdmi-connector";
- label = "HDMI1 OUT";
- type = "a";
-
- port {
- hdmi1_con: endpoint {
- };
- };
+ states = <3300000 1>, <1800000 0>;
};
vga {
};
};
+&csi20 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&adv7482_txb>;
+ };
+ };
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
clock-frequency = <32768>;
};
+&hscif1 {
+ pinctrl-0 = <&hscif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ /* Please only enable hscif1 or scif1 */
+ status = "okay";
+};
+
&hsusb {
dr_mode = "otg";
status = "okay";
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint0>;
+ };
+ };
};
cs2000: clk_multiplier@4f {
#gpio-cells = <2>;
};
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio6>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+ <31 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+
+ port@b {
+ reg = <11>;
+
+ adv7482_txb: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
+ };
+ };
+
csa_vdd: adc@7c {
compatible = "maxim,max9611";
reg = <0x7c>;
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
+ rohm,ddr-backup-power = <0xf>;
+ rohm,rstbmode-level;
regulators {
dvfs: dvfs {
};
};
};
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&ohci0 {
avb_pins: avb {
mux {
- groups = "avb_link", "avb_mdc", "avb_mii";
+ groups = "avb_link", "avb_mdio", "avb_mii";
function = "avb";
};
- pins_mdc {
- groups = "avb_mdc";
+ pins_mdio {
+ groups = "avb_mdio";
drive-strength = <24>;
};
function = "du";
};
+ hscif1_pins: hscif1 {
+ groups = "hscif1_data_a", "hscif1_ctrl_a";
+ function = "hscif1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2_a";
function = "i2c2";
function = "intc_ex";
};
+ keys_pins: keys {
+ pins = "GP_5_17", "GP_5_20", "GP_5_22";
+ bias-pull-up;
+ };
+
pwm1_pins: pwm1 {
groups = "pwm1_a";
function = "pwm1";
power-source = <1800>;
};
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
- function = "sdhi2";
- power-source = <1800>;
- };
-
sdhi3_pins: sd3 {
groups = "sdhi3_data4", "sdhi3_ctrl";
function = "sdhi3";
<&audio_clk_c>,
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rsnd_port0: port@0 {
+ reg = <0>;
+ rsnd_endpoint0: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
};
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
uart-has-rtscts;
- status = "okay";
+ /* Please only enable hscif1 or scif1 */
+ /* status = "okay"; */
};
&scif2 {
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
-
- max-frequency = <208000000>;
};
&sdhi2 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-1 = <&sdhi2_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <®_3p3v>;
non-removable;
fixed-emmc-driver-type = <1>;
status = "okay";
- max-frequency = <200000000>;
};
&sdhi3 {
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
- max-frequency = <208000000>;
};
&ssi1 {
phys = <&usb3_phy0>;
phy-names = "usb";
+ companion = <&xhci0>;
+
status = "okay";
};
clock-frequency = <100000000>;
};
-&wdt0 {
- timeout-sec = <60>;
+&vin0 {
+ status = "okay";
+};
+
+&vin1 {
+ status = "okay";
+};
+
+&vin2 {
+ status = "okay";
+};
+
+&vin3 {
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&vin6 {
+ status = "okay";
+};
+
+&vin7 {
status = "okay";
};