/dts-v1/;
#include "r8a77970.dtsi"
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Eagle board based on r8a77970";
aliases {
serial0 = &scif0;
ethernet0 = &avb;
- spi0 = &rpc;
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
+ d3p3: regulator-fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+
+ vcc-supply = <&d3p3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
};
&avb {
- pinctrl-0 = <&avb0_pins>;
+ pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
+
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
status = "okay";
- reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
};
};
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
+&du {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
};
-&pfc {
- avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
- function = "avb0";
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
};
};
+};
+
+&pfc {
+ avb_pins: avb0 {
+ groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+ function = "avb0";
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data_a";
+ function = "canfd0";
+ };
i2c0_pins: i2c0 {
groups = "i2c0";
};
};
-&rpc {
- num-cs = <1>;
- status = "okay";
- spi-max-frequency = <50000000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- flash0: spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fs512s", "spi-flash", "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <1>;
- reg = <0>;
- status = "okay";
- };
-};
-
&rwdt {
timeout-sec = <60>;
status = "okay";