Merge branch 'master' of git://git.denx.de/u-boot-spi

[platform/kernel/u-boot.git] / arch / arm / dts / meson-gxl-s905x-p212.dtsi

diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
index f3eea8e..a1b3101 100644 (file)
--- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
  * Based on meson-gx-p23x-q20x.dtsi:
@@ -5,8 +6,6 @@
  *   Author: Carlo Caione <carlo@endlessm.com>
  * - Copyright (c) 2016 BayLibre, SAS.
  *   Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /* Common DTSI for devices which are based on the P212 reference board. */
@@ -17,6 +16,7 @@
        aliases {
                serial0 = &uart_AO;
                serial1 = &uart_A;
+               ethernet0 = &ethmac;
        };
 
        chosen {
@@ -28,6 +28,18 @@
                reg = <0x0 0x0 0x0 0x80000000>;
        };
 
+       hdmi_5v: regulator-hdmi-5v {
+               compatible = "regulator-fixed";
+
+               regulator-name = "HDMI_5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+       };
+
        vddio_boot: regulator-vddio_boot {
                compatible = "regulator-fixed";
                regulator-name = "VDDIO_BOOT";
@@ -95,7 +107,8 @@
 &sd_emmc_a {
        status = "okay";
        pinctrl-0 = <&sdio_pins>;
-       pinctrl-names = "default";
+       pinctrl-1 = <&sdio_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
        #address-cells = <1>;
        #size-cells = <0>;
 
@@ -116,7 +129,8 @@
 &sd_emmc_b {
        status = "okay";
        pinctrl-0 = <&sdcard_pins>;
-       pinctrl-names = "default";
+       pinctrl-1 = <&sdcard_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
 
        bus-width = <4>;
        cap-sd-highspeed;
@@ -133,11 +147,11 @@
 /* eMMC */
 &sd_emmc_c {
        status = "okay";
-       pinctrl-0 = <&emmc_pins>;
-       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+       pinctrl-1 = <&emmc_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
 
        bus-width = <8>;
-       cap-sd-highspeed;
        cap-mmc-highspeed;
        max-frequency = <200000000>;
        non-removable;
@@ -171,3 +185,14 @@
        pinctrl-0 = <&uart_ao_a_pins>;
        pinctrl-names = "default";
 };
+
+&usb0 {
+       status = "okay";
+};
+
+&usb2_phy0 {
+       /*
+        * HDMI_5V is also used as supply for the USB VBUS.
+        */
+       phy-supply = <&hdmi_5v>;
+};