arm: dts: am3x: Update devicetree header comments to sync with v6.3-rc6

[platform/kernel/u-boot.git] / arch / arm / dts / am335x-evm.dts

diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts
index e1c5d4f..5b756d4 100644 (file)
--- a/arch/arm/dts/am335x-evm.dts
+++ b/arch/arm/dts/am335x-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -16,6 +13,7 @@
 
        chosen {
                stdout-path = &uart0;
+               tick-timer = &timer2;
        };
 
        cpus {
@@ -79,8 +77,6 @@
 
        gpio_keys: volume_keys@0 {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
                autorepeat;
 
                switch@9 {
@@ -487,7 +483,7 @@
 &epwmss0 {
        status = "okay";
 
-       ecap0: ecap@48300100 {
+       ecap0: ecap@100 {
                status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&ecap0_pins>;
@@ -676,6 +672,7 @@
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        status = "okay";
+       slaves = <1>;
 };
 
 &davinci_mdio {
@@ -683,16 +680,15 @@
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
        status = "okay";
-};
 
-&cpsw_emac0 {
-       phy_id = <&davinci_mdio>, <0>;
-       phy-mode = "rgmii-txid";
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
 };
 
-&cpsw_emac1 {
-       phy_id = <&davinci_mdio>, <1>;
-       phy-mode = "rgmii-txid";
+&cpsw_emac0 {
+       phy-handle = <&ethphy0>;
+       phy-mode = "rgmii-id";
 };
 
 &tscadc {
@@ -716,14 +712,14 @@
        bus-width = <4>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc1_pins>;
-       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
        /* these are on the crossbar and are outlined in the
           xbar-event-map element */
-       dmas = <&edma 12
-               &edma 13>;
+       dmas = <&edma 12 0
+               &edma 13 0>;
        dma-names = "tx", "rx";
        status = "okay";
        vmmc-supply = <&wlan_en_reg>;
@@ -763,3 +759,8 @@
        pinctrl-names = "default";
        pinctrl-0 = <&dcan1_pins_default>;
 };
+
+&rtc {
+       clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+       clock-names = "ext-clk", "int-clk";
+};