/*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
CLOCK_MAX_MUX = 8 /* number of source options for each clock */
};
-enum {
- MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
- MASK_BITS_31_29,
- MASK_BITS_29_28,
-};
-
/*
* Clock source mux for each clock type. This just converts our enum into
* a list of mux sources for use by the code.
MASK_BITS_31_29},
{ CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
- MASK_BITS_29_28}
+ MASK_BITS_31_28}
};
/*
/* 40 */
NONE(KFUSE),
- NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_SBC1,
PERIPHC_NOR,
NONE(RESERVED43),
PERIPHC_SBC2,
void clock_early_init(void)
{
- /*
- * PLLP output frequency set to 408Mhz
- * PLLC output frequency set to 228Mhz
- */
- switch (clock_get_osc_freq()) {
- case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
- break;
-
- case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
- break;
-
- case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
- break;
- case CLOCK_OSC_FREQ_19_2:
- default:
- /*
- * These are not supported. It is too early to print a
- * message and the UART likely won't work anyway due to the
- * oscillator being wrong.
- */
- break;
- }
+ tegra30_set_up_pllp();
+}
+
+void arch_timer_init(void)
+{
}