select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
imply PANIC_HANG
config ARCH_LS1028A
bool
select ARMV8_SET_SMPEN
+ select FSL_LAYERSCAPE
select FSL_LSCH3
select NXP_LSCH3_2
select SYS_FSL_HAS_CCI400
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A050382
+ select RESV_RAM if GIC_V3_ITS
imply PANIC_HANG
config ARCH_LS1043A
select SYS_FSL_ERRATUM_A009660 if !TFABOOT
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009798
- select SYS_FSL_ERRATUM_A009929
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply CMD_PCI
config ARCH_LS1046A
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply SCSI
imply SCSI_AHCI
select SYS_I2C_MXC_I2C2 if !TFABOOT
select SYS_I2C_MXC_I2C3 if !TFABOOT
select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
imply SCSI
imply PANIC_HANG
select SYS_I2C_MXC_I2C2 if !TFABOOT
select SYS_I2C_MXC_I2C3 if !TFABOOT
select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply PANIC_HANG
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A050106
select SYS_FSL_HAS_RGMII
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_CCN508
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
+ select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply PANIC_HANG
imply SCSI
select SYS_FSL_SEC_BE
config FSL_LSCH3
+ select ARCH_MISC_INIT
bool
config NXP_LSCH3_2
config FSL_LAYERSCAPE
bool
-config FSL_PCIE_COMPAT
- string "PCIe compatible of Kernel DT"
- depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4
- default "fsl,ls1012a-pcie" if ARCH_LS1012A
- default "fsl,ls1028a-pcie" if ARCH_LS1028A
- default "fsl,ls1043a-pcie" if ARCH_LS1043A
- default "fsl,ls1046a-pcie" if ARCH_LS1046A
- default "fsl,ls2080a-pcie" if ARCH_LS2080A
- default "fsl,ls1088a-pcie" if ARCH_LS1088A
- default "fsl,lx2160a-pcie" if ARCH_LX2160A
- help
- This compatible is used to find pci controller node in Kernel DT
- to complete fixup.
-
config HAS_FEATURE_GIC64K_ALIGN
bool
default y if ARCH_LS1043A
config SYS_FSL_ERRATUM_A009798
bool "Workaround for USB PHY erratum A009798"
+config SYS_FSL_ERRATUM_A050106
+ bool "Workaround for USB PHY erratum A050106"
+ help
+ USB3.0 Receiver needs to enable fixed equalization
+ for each of PHY instances in an SOC. This is similar
+ to erratum A-009007, but this one is for LX2160A,
+ and the register value is different.
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config FSPI_AHB_EN_4BYTE
+ bool "Enable 4-byte Fast Read command for AHB mode"
+ default n
+ help
+ The default setting for FlexSPI AHB bus just supports 3-byte addressing.
+ But some FlexSPI flash sizes are up to 64MBytes.
+ This flag enables fast read command for AHB mode and modifies required
+ LUT to support full FlexSPI flash.
+
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
config SYS_FSL_ERRATUM_A009660
bool
-config SYS_FSL_ERRATUM_A009929
- bool
-
config SYS_FSL_ERRATUM_A050382
bool