config ARCH_LS1012A
bool
select ARMV8_SET_SMPEN
- select ARM_ERRATA_855873
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
select FSL_LSCH2
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_ERRATUM_A009008
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ imply PANIC_HANG
+
+config ARCH_LS1028A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select NXP_LSCH3_2
+ select SYS_FSL_HAS_CCI400
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select FSL_TZASC_1
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A008514 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A050382
+ select RESV_RAM if GIC_V3_ITS
imply PANIC_HANG
config ARCH_LS1043A
bool
select ARMV8_SET_SMPEN
- select ARM_ERRATA_855873
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
select FSL_LSCH2
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
- select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
- select SYS_FSL_ERRATUM_A009660
- select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009660 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009929
- select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
- imply SCSI
- imply SCSI_AHCI
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply CMD_PCI
config ARCH_LS1046A
bool
select ARMV8_SET_SMPEN
+ select FSL_LAYERSCAPE
select FSL_LSCH2
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
- select SYS_FSL_ERRATUM_A008336
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply SCSI
imply SCSI_AHCI
config ARCH_LS1088A
bool
select ARMV8_SET_SMPEN
- select ARM_ERRATA_855873
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
select FSL_LSCH3
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_1
select SYS_FSL_SRDS_2
select FSL_TZASC_1
+ select FSL_TZASC_400
+ select FSL_TZPC_BP147
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1 if !TFABOOT
+ select SYS_I2C_MXC_I2C2 if !TFABOOT
+ select SYS_I2C_MXC_I2C3 if !TFABOOT
+ select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
imply SCSI
imply PANIC_HANG
select ARM_ERRATA_828024
select ARM_ERRATA_829520
select ARM_ERRATA_833471
+ select FSL_LAYERSCAPE
select FSL_LSCH3
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_SRDS_2
select FSL_TZASC_1
select FSL_TZASC_2
- select SYS_FSL_ERRATUM_A008336
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008514
+ select FSL_TZASC_400
+ select FSL_TZPC_BP147
+ select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008514 if !TFABOOT
select SYS_FSL_ERRATUM_A008585
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009635
- select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A009203
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1 if !TFABOOT
+ select SYS_I2C_MXC_I2C2 if !TFABOOT
+ select SYS_I2C_MXC_I2C3 if !TFABOOT
+ select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
+ imply DISTRO_DEFAULTS
+ imply PANIC_HANG
+
+config ARCH_LX2160A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select NXP_LSCH3_2
+ select SYS_HAS_SERDES
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select SYS_NXP_SRDS_3
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A050106
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_CCN508
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select RESV_RAM if GIC_V3_ITS
+ imply DISTRO_DEFAULTS
imply PANIC_HANG
+ imply SCSI
+ imply SCSI_AHCI
config FSL_LSCH2
bool
select SYS_FSL_SEC_BE
config FSL_LSCH3
+ select ARCH_MISC_INIT
bool
-config FSL_MC_ENET
- bool "Management Complex network"
- depends on ARCH_LS2080A || ARCH_LS1088A
- default y
- select RESV_RAM
- help
- Enable Management Complex (MC) network
+config NXP_LSCH3_2
+ bool
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
-config FSL_PCIE_COMPAT
- string "PCIe compatible of Kernel DT"
- depends on PCIE_LAYERSCAPE
- default "fsl,ls1012a-pcie" if ARCH_LS1012A
- default "fsl,ls1043a-pcie" if ARCH_LS1043A
- default "fsl,ls1046a-pcie" if ARCH_LS1046A
- default "fsl,ls2080a-pcie" if ARCH_LS2080A
- default "fsl,ls1088a-pcie" if ARCH_LS1088A
- help
- This compatible is used to find pci controller node in Kernel DT
- to complete fixup.
+config FSL_LAYERSCAPE
+ bool
config HAS_FEATURE_GIC64K_ALIGN
bool
endchoice
-config SYS_LS_PPA_FW_ADDR
- hex "Address of PPA firmware loading from"
- depends on FSL_LS_PPA
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
- default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
- default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
- default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
- default 0x400000 if SYS_LS_PPA_FW_IN_MMC
- default 0x400000 if SYS_LS_PPA_FW_IN_NAND
-
- help
- If the PPA firmware locate at XIP flash, such as NOR or
- QSPI flash, this address is a directly memory-mapped.
- If it is in a serial accessed flash, such as NAND and SD
- card, it is a byte offset.
-
-config SYS_LS_PPA_ESBC_ADDR
- hex "hdr address of PPA firmware loading from"
- depends on FSL_LS_PPA && CHAIN_OF_TRUST
- default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
- default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
- default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
- default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
- default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
- default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
- default 0x680000 if SYS_LS_PPA_FW_IN_MMC
- default 0x680000 if SYS_LS_PPA_FW_IN_NAND
- help
- If the PPA header firmware locate at XIP flash, such as NOR or
- QSPI flash, this address is a directly memory-mapped.
- If it is in a serial accessed flash, such as NAND and SD
- card, it is a byte offset.
-
config LS_PPA_ESBC_HDR_SIZE
hex "Length of PPA ESBC header"
depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
config SYS_FSL_ERRATUM_A009798
bool "Workaround for USB PHY erratum A009798"
+config SYS_FSL_ERRATUM_A050106
+ bool "Workaround for USB PHY erratum A050106"
+ help
+ USB3.0 Receiver needs to enable fixed equalization
+ for each of PHY instances in an SOC. This is similar
+ to erratum A-009007, but this one is for LX2160A,
+ and the register value is different.
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
config MAX_CPUS
int "Maximum number of CPUs permitted for Layerscape"
+ default 2 if ARCH_LS1028A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
default 8 if ARCH_LS1088A
+ default 16 if ARCH_LX2160A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
-config SECURE_BOOT
- bool "Secure Boot"
+config EMC2305
+ bool "Fan controller"
+ help
+ Enable the EMC2305 fan controller for configuration of fan
+ speed.
+
+config NXP_ESBC
+ bool "NXP_ESBC"
help
Enable Freescale Secure Boot feature
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config FSPI_AHB_EN_4BYTE
+ bool "Enable 4-byte Fast Read command for AHB mode"
+ default n
+ help
+ The default setting for FlexSPI AHB bus just supports 3-byte addressing.
+ But some FlexSPI flash sizes are up to 64MBytes.
+ This flag enables fast read command for AHB mode and modifies required
+ LUT to support full FlexSPI flash.
+
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
- default 0x3090000 if ARCH_LS1088A
+ default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A
default 0x180000 if FSL_LSCH2
help
Offset for CCI400 base
config SYS_FSL_HAS_CCN504
bool
+config SYS_FSL_HAS_CCN508
+ bool
+
config SYS_FSL_HAS_DP_DDR
bool
config SYS_FSL_SRDS_2
bool
+config SYS_NXP_SRDS_3
+ bool
+
config SYS_HAS_SERDES
bool
config FSL_TZASC_2
bool
+config FSL_TZASC_400
+ bool
+
+config FSL_TZPC_BP147
+ bool
endmenu
menu "Layerscape clock tree configuration"
config SYS_FSL_PCLK_DIV
int "Platform clock divider"
+ default 1 if ARCH_LS1028A
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1046A
default 1 if ARCH_LS1088A
config SYS_FSL_DUART_CLK_DIV
int "DUART clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LX2160A
default 2
help
This is the divider that is used to derive DUART clock from Platform
config SYS_FSL_I2C_CLK_DIV
int "I2C clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LS1012A
+ default 4 if ARCH_LS1028A
+ default 8 if ARCH_LX2160A
+ default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive I2C clock from Platform
config SYS_FSL_IFC_CLK_DIV
int "IFC clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LS1012A
+ default 4 if ARCH_LS1028A
+ default 8 if ARCH_LX2160A
+ default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive IFC clock from Platform
help
This is the divider that is used to derive SDHC clock from Platform
clock, in another word SDHC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_QMAN_CLK_DIV
+ int "QMAN clock divider"
+ default 1 if ARCH_LS1043A
+ default 2
+ help
+ This is the divider that is used to derive QMAN clock from Platform
+ clock, in another word QMAN_clk = Platform_clk / this_divider.
endmenu
config RESV_RAM
config SYS_FSL_EC1
bool
help
- Ethernet controller 1, this is connected to MAC3.
+ Ethernet controller 1, this is connected to
+ MAC17 for LX2160A or to MAC3 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_EC2
bool
help
- Ethernet controller 2, this is connected to MAC4.
+ Ethernet controller 2, this is connected to
+ MAC18 for LX2160A or to MAC4 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_ERRATUM_A008336
config SYS_FSL_ERRATUM_A009929
bool
+config SYS_FSL_ERRATUM_A050382
+ bool
config SYS_FSL_HAS_RGMII
bool
depends on SYS_FSL_EC1 || SYS_FSL_EC2
-
-config SYS_MC_RSV_MEM_ALIGN
- hex "Management Complex reserved memory alignment"
- depends on RESV_RAM
- default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
- help
- Reserved memory needs to be aligned for MC to use. Default value
- is 512MB.
-
config SPL_LDSCRIPT
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
projects / platform / kernel / u-boot.git / blobdiff