.globl _bss_end_ofs
_bss_end_ofs:
- .word __bss_end__ - _start
+ .word __bss_end - _start
.globl _end_ofs
_end_ofs:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
- b clear_bss
+
+relocate_done:
+
+ bx lr
+
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
.word __rel_dyn_end - _start
_dynsym_start_ofs:
.word __dynsym_start - _start
+ENDPROC(relocate_code)
-clear_bss:
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
+#endif
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-jump_2_ram:
+ENTRY(c_runtime_cpu_setup)
/*
* If I-cache is enabled invalidate it
*/
/*
* Move vector table
*/
-#if !defined(CONFIG_TEGRA20)
+#if !defined(CONFIG_TEGRA)
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
- add r0, r0, r9
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
-#endif /* !Tegra20 */
-
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-ENDPROC(relocate_code)
-#endif
+#endif /* !Tegra */
+
+ bx lr
+
+ENDPROC(c_runtime_cpu_setup)
/*************************************************************************
*
orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache
#endif
mcr p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARM_ERRATA_716044
+ mrc p15, 0, r0, c1, c0, 0 @ read system control register
+ orr r0, r0, #1 << 11 @ set bit #11
+ mcr p15, 0, r0, c1, c0, 0 @ write system control register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_742230
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 4 @ set bit #4
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_743622
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 6 @ set bit #6
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_751472
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 11 @ set bit #11
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
mov pc, lr @ back to my caller
ENDPROC(cpu_init_cp15)
* basic memory. Go here to bump up clock rate and handle
* wake up conditions.
*/
- mov ip, lr @ persevere link reg across call
- bl lowlevel_init @ go setup pll,mux,memory
- mov lr, ip @ restore link
- mov pc, lr @ back to my caller
+ b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif