*
* Copyright (C) 2012 Samsung Electronics
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SMDK5250_SETUP_H
#include <config.h>
#include <asm/arch/dmc.h>
-/* APLL_CON1 */
-#define APLL_CON1_VAL (0x00203800)
-
-/* MPLL_CON1 */
-#define MPLL_CON1_VAL (0x00203800)
-
-/* CPLL_CON1 */
-#define CPLL_CON1_VAL (0x00203800)
-
-/* GPLL_CON1 */
-#define GPLL_CON1_VAL (0x00203800)
-
-/* EPLL_CON1, CON2 */
-#define EPLL_CON1_VAL 0x00000000
-#define EPLL_CON2_VAL 0x00000080
-
-/* VPLL_CON1, CON2 */
-#define VPLL_CON1_VAL 0x00000000
-#define VPLL_CON2_VAL 0x00000080
+#define NOT_AVAILABLE 0
+#define DATA_MASK 0xFFFFF
-/* BPLL_CON1 */
-#define BPLL_CON1_VAL 0x00203800
+#define ENABLE_BIT 0x1
+#define DISABLE_BIT 0x0
+#define CA_SWAP_EN (1 << 0)
/* Set PLL */
#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
-/* CLK_SRC_CPU */
-/* 0 = MOUTAPLL, 1 = SCLKMPLL */
-#define MUX_HPM_SEL 0
-#define MUX_CPU_SEL 0
-#define MUX_APLL_SEL 1
-
-#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
- | (MUX_CPU_SEL << 16) \
- | (MUX_APLL_SEL))
-
/* MEMCONTROL register bit fields */
#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0)
#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1)
/* MEMCONFIG0 register bit fields */
#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
+#define DMC_MEMCONFIG_CHIP_MAP_SPLIT (2 << 12)
#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
)
+/*
+ * As we use channel interleaving, therefore value of the base address
+ * register must be set as half of the bus base address
+ * RAM start addess is 0x2000_0000 which means chip_base is 0x20, so
+ * we need to set half 0x10 to the membaseconfigx registers
+ * see exynos5420 UM section 17.17.3.21 for more.
+ */
+#define DMC_CHIP_BASE_0 0x10
+#define DMC_CHIP_BASE_1 0x50
+#define DMC_CHIP_MASK 0x7C0
+
#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80)
/* COJCONTROL register bit fields */
#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3)
+#define DMC_CONCONTROL_IO_PD_CON_ENABLE (1 << 3)
#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5)
+#define DMC_CONCONTROL_AREF_EN_ENABLE (1 << 5)
#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8)
#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8)
#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12)
#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16)
#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28)
-/* CLK_DIV_CPU0_VAL */
-#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \
- | (APLL_RATIO << 24) \
- | (PCLK_DBG_RATIO << 20) \
- | (ATB_RATIO << 16) \
- | (PERIPH_RATIO << 12) \
- | (ACP_RATIO << 8) \
- | (CPUD_RATIO << 4) \
- | (ARM_RATIO))
+#define DMC_CONCONTROL_VAL 0x1FFF2101
+#define DREX_CONCONTROL_VAL DMC_CONCONTROL_VAL \
+ | DMC_CONCONTROL_AREF_EN_ENABLE \
+ | DMC_CONCONTROL_IO_PD_CON_ENABLE
-/* CLK_FSYS */
-#define CLK_SRC_FSYS0_VAL 0x66666
-#define CLK_DIV_FSYS0_VAL 0x0BB00000
+#define DMC_CONCONTROL_IO_PD_CON(x) (x << 6)
-/* CLK_DIV_CPU1 */
+/* CLK_DIV_CPU1 */
#define HPM_RATIO 0x2
#define COPY_RATIO 0x0
/* CLK_DIV_SYSLFT */
#define CLK_DIV_SYSLFT_VAL 0x00000311
+#define MUX_APLL_SEL_MASK (1 << 0)
+#define MUX_MPLL_SEL_MASK (1 << 8)
+#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8)
+#define MUX_CPLL_SEL_MASK (1 << 8)
+#define MUX_EPLL_SEL_MASK (1 << 12)
+#define MUX_VPLL_SEL_MASK (1 << 16)
+#define MUX_GPLL_SEL_MASK (1 << 28)
+#define MUX_BPLL_SEL_MASK (1 << 0)
+#define MUX_HPM_SEL_MASK (1 << 20)
+#define HPM_SEL_SCLK_MPLL (1 << 21)
+#define PLL_LOCKED (1 << 29)
+#define APLL_CON0_LOCKED (1 << 29)
+#define MPLL_CON0_LOCKED (1 << 29)
+#define BPLL_CON0_LOCKED (1 << 29)
+#define CPLL_CON0_LOCKED (1 << 29)
+#define EPLL_CON0_LOCKED (1 << 29)
+#define GPLL_CON0_LOCKED (1 << 29)
+#define VPLL_CON0_LOCKED (1 << 29)
+#define CLK_REG_DISABLE 0x0
+#define TOP2_VAL 0x0110000
+
+/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
+#define SPI0_ISP_SEL 6
+#define SPI1_ISP_SEL 6
+#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \
+ | (SPI0_ISP_SEL << 0)
+
+/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
+#define SPI0_ISP_RATIO 0xf
+#define SPI1_ISP_RATIO 0xf
+#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \
+ | (SPI0_ISP_RATIO << 0)
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO_MASK 0xf
+#define MMC2_RATIO_VAL 0x3
+#define MMC2_RATIO_OFFSET 0
+
+#define MMC2_PRE_RATIO_MASK 0xff
+#define MMC2_PRE_RATIO_VAL 0x9
+#define MMC2_PRE_RATIO_OFFSET 8
+
+#define MMC3_RATIO_MASK 0xf
+#define MMC3_RATIO_VAL 0x1
+#define MMC3_RATIO_OFFSET 16
+
+#define MMC3_PRE_RATIO_MASK 0xff
+#define MMC3_PRE_RATIO_VAL 0x0
+#define MMC3_PRE_RATIO_OFFSET 24
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL 0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL 0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL 0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL 0x10
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL 0x1
+
+/* CLK_SRC_KFC */
+#define SRC_KFC_HPM_SEL (1 << 15)
+
+/* CLK_SRC_KFC */
+#define CLK_SRC_KFC_VAL 0x00008001
+
+/* CLK_DIV_KFC */
+#define CLK_DIV_KFC_VAL 0x03300110
+
+/* CLK_DIV2_RATIO */
+#define CLK_DIV2_RATIO 0x10111150
+
+/* CLK_DIV4_RATIO */
+#define CLK_DIV4_RATIO 0x00000003
+
+/* CLK_DIV_G2D */
+#define CLK_DIV_G2D 0x00000010
+
+/*
+ * DIV_DISP1_0
+ * For DP, divisor should be 2
+ */
+#define CLK_DIV_DISP1_0_FIMD1 (2 << 0)
+
+/* CLK_GATE_IP_DISP1 */
+#define CLK_GATE_DP1_ALLOW (1 << 4)
+
+/* AUDIO CLK SEL */
+#define AUDIO0_SEL_EPLL (0x6 << 28)
+#define AUDIO0_RATIO 0x5
+#define PCM0_RATIO 0x3
+#define DIV_MAU_VAL (PCM0_RATIO << 24 | AUDIO0_RATIO << 20)
+
+/* CLK_SRC_CDREX */
+#define MUX_MCLK_CDR_MSPLL (1 << 4)
+#define MUX_BPLL_SEL_FOUTBPLL (1 << 0)
+#define BPLL_SEL_MASK 0x7
+#define FOUTBPLL 2
+
+#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
+#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
+
+#define PHY_CON0_RESET_VAL 0x17020a40
+#define P0_CMD_EN (1 << 14)
+#define BYTE_RDLVL_EN (1 << 13)
+#define CTRL_SHGATE (1 << 8)
+
+#define PHY_CON1_RESET_VAL 0x09210100
+#define RDLVL_PASS_ADJ_VAL 0x6
+#define RDLVL_PASS_ADJ_OFFSET 16
+#define CTRL_GATEDURADJ_MASK (0xf << 20)
+#define READ_LEVELLING_DDR3 0x0100
+
+#define PHY_CON2_RESET_VAL 0x00010004
+#define INIT_DESKEW_EN (1 << 6)
+#define DLL_DESKEW_EN (1 << 12)
+#define RDLVL_GATE_EN (1 << 24)
+#define RDLVL_EN (1 << 25)
+#define RDLVL_INCR_ADJ (0x1 << 16)
+
+/* DREX_PAUSE */
+#define DREX_PAUSE_EN (1 << 0)
+
+#define BYPASS_EN (1 << 22)
+
+/* MEMMORY VAL */
+#define PHY_CON0_VAL 0x17021A00
+
+#define PHY_CON12_RESET_VAL 0x10100070
+#define PHY_CON12_VAL 0x10107F50
+#define CTRL_START (1 << 6)
+#define CTRL_DLL_ON (1 << 5)
+#define CTRL_FORCE_MASK (0x7F << 8)
+#define CTRL_LOCK_COARSE_MASK (0x7F << 10)
+
+#define CTRL_OFFSETD_RESET_VAL 0x8
+#define CTRL_OFFSETD_VAL 0x7F
+
+#define CTRL_OFFSETR0 0x7F
+#define CTRL_OFFSETR1 0x7F
+#define CTRL_OFFSETR2 0x7F
+#define CTRL_OFFSETR3 0x7F
+#define PHY_CON4_VAL (CTRL_OFFSETR0 << 0 | \
+ CTRL_OFFSETR1 << 8 | \
+ CTRL_OFFSETR2 << 16 | \
+ CTRL_OFFSETR3 << 24)
+#define PHY_CON4_RESET_VAL 0x08080808
+
+#define CTRL_OFFSETW0 0x7F
+#define CTRL_OFFSETW1 0x7F
+#define CTRL_OFFSETW2 0x7F
+#define CTRL_OFFSETW3 0x7F
+#define PHY_CON6_VAL (CTRL_OFFSETW0 << 0 | \
+ CTRL_OFFSETW1 << 8 | \
+ CTRL_OFFSETW2 << 16 | \
+ CTRL_OFFSETW3 << 24)
+#define PHY_CON6_RESET_VAL 0x08080808
+
+#define PHY_CON14_RESET_VAL 0x001F0000
+#define CTRL_PULLD_DQS 0xF
+#define CTRL_PULLD_DQS_OFFSET 0
+
+/* ZQ Configurations */
+#define PHY_CON16_RESET_VAL 0x08000304
+
+#define ZQ_CLK_EN (1 << 27)
+#define ZQ_CLK_DIV_EN (1 << 18)
+#define ZQ_MANUAL_STR (1 << 1)
+#define ZQ_DONE (1 << 0)
+#define ZQ_MODE_DDS_OFFSET 24
+
+#define CTRL_RDLVL_GATE_ENABLE 1
+#define CTRL_RDLVL_GATE_DISABLE 0
+#define CTRL_RDLVL_DATA_ENABLE 2
+
+/* Direct Command */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_PALL 0x01000000
+#define DIRECT_CMD_ZQINIT 0x0a000000
+#define DIRECT_CMD_CHANNEL_SHIFT 28
+#define DIRECT_CMD_CHIP_SHIFT 20
+#define DIRECT_CMD_BANK_SHIFT 16
+#define DIRECT_CMD_REFA (5 << 24)
+#define DIRECT_CMD_MRS1 0x71C00
+#define DIRECT_CMD_MRS2 0x10BFC
+#define DIRECT_CMD_MRS3 0x0050C
+#define DIRECT_CMD_MRS4 0x00868
+#define DIRECT_CMD_MRS5 0x00C04
+
+/* Drive Strength */
+#define IMPEDANCE_48_OHM 4
+#define IMPEDANCE_40_OHM 5
+#define IMPEDANCE_34_OHM 6
+#define IMPEDANCE_30_OHM 7
+#define PHY_CON39_VAL_48_OHM 0x09240924
+#define PHY_CON39_VAL_40_OHM 0x0B6D0B6D
+#define PHY_CON39_VAL_34_OHM 0x0DB60DB6
+#define PHY_CON39_VAL_30_OHM 0x0FFF0FFF
+
+#define CTRL_BSTLEN_OFFSET 8
+#define CTRL_RDLAT_OFFSET 0
+
+#define CMD_DEFAULT_LPDDR3 0xF
+#define CMD_DEFUALT_OFFSET 0
+#define T_WRDATA_EN 0x7
+#define T_WRDATA_EN_DDR3 0x8
+#define T_WRDATA_EN_OFFSET 16
+#define T_WRDATA_EN_MASK 0x1f
+
+#define PHY_CON31_VAL 0x0C183060
+#define PHY_CON32_VAL 0x60C18306
+#define PHY_CON33_VAL 0x00000030
+
+#define PHY_CON31_RESET_VAL 0x0
+#define PHY_CON32_RESET_VAL 0x0
+#define PHY_CON33_RESET_VAL 0x0
+
+#define SL_DLL_DYN_CON_EN (1 << 1)
+#define FP_RESYNC (1 << 3)
+#define CTRL_START (1 << 6)
+
+#define DMC_AREF_EN (1 << 5)
+#define DMC_CONCONTROL_EMPTY (1 << 8)
+#define DFI_INIT_START (1 << 28)
+
+#define DMC_MEMCONTROL_VAL 0x00312700
+#define CLK_STOP_EN (1 << 0)
+#define DPWRDN_EN (1 << 1)
+#define DSREF_EN (1 << 5)
+
+#define MEMBASECONFIG_CHIP_MASK_VAL 0x7E0
+#define MEMBASECONFIG_CHIP_MASK_OFFSET 0
+#define MEMBASECONFIG0_CHIP_BASE_VAL 0x20
+#define MEMBASECONFIG1_CHIP_BASE_VAL 0x40
+#define CHIP_BASE_OFFSET 16
+
+#define MEMCONFIG_VAL 0x1323
+#define PRECHCONFIG_DEFAULT_VAL 0xFF000000
+#define PWRDNCONFIG_DEFAULT_VAL 0xFFFF00FF
+
+#define TIMINGAREF_VAL 0x5d
+#define TIMINGROW_VAL 0x345A8692
+#define TIMINGDATA_VAL 0x3630065C
+#define TIMINGPOWER_VAL 0x50380336
+#define DFI_INIT_COMPLETE (1 << 3)
+
+#define BRBRSVCONTROL_VAL 0x00000033
+#define BRBRSVCONFIG_VAL 0x88778877
+
+/* Clock Gating Control (CGCONTROL) register */
+#define MEMIF_CG_EN (1 << 3) /* Memory interface clock gating */
+#define SCG_CG_EN (1 << 2) /* Scheduler clock gating */
+#define BUSIF_WR_CG_EN (1 << 1) /* Bus interface write channel clock gating */
+#define BUSIF_RD_CG_EN (1 << 0) /* Bus interface read channel clock gating */
+#define DMC_INTERNAL_CG (MEMIF_CG_EN | SCG_CG_EN | \
+ BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
+
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL 0x0
+#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
+#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */
+#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */
+#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */
+
+/* Driver strength for CK, CKE, CS & CA */
+#define IMP_OUTPUT_DRV_40_OHM 0x5
+#define IMP_OUTPUT_DRV_30_OHM 0x7
+#define DA_3_DS_OFFSET 25
+#define DA_2_DS_OFFSET 22
+#define DA_1_DS_OFFSET 19
+#define DA_0_DS_OFFSET 16
+#define CA_CK_DRVR_DS_OFFSET 9
+#define CA_CKE_DRVR_DS_OFFSET 6
+#define CA_CS_DRVR_DS_OFFSET 3
+#define CA_ADR_DRVR_DS_OFFSET 0
+
+#define PHY_CON42_CTRL_BSTLEN_SHIFT 8
+#define PHY_CON42_CTRL_RDLAT_SHIFT 0
+
+/*
+ * Definitions that differ with SoC's.
+ * Below is the part defining macros for smdk5250.
+ * Else part introduces macros for smdk5420.
+ */
+#ifndef CONFIG_SMDK5420
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL (0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL (0x00203800)
+
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL (NOT_AVAILABLE)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL (0x00203800)
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL 0x00000000
+#define EPLL_CON2_VAL 0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL 0x00000000
+#define VPLL_CON2_VAL 0x00000080
+
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL NOT_AVAILABLE
+#define RPLL_CON2_VAL NOT_AVAILABLE
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL 0x00203800
+
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL NOT_AVAILABLE
+
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL NOT_AVAILABLE
+
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL NOT_AVAILABLE
+
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL NOT_AVAILABLE
+#define CLK_DIV_ISP0_VAL 0x31
+#define CLK_DIV_ISP1_VAL 0x0
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL 0x66666
+#define CLK_DIV_FSYS0_VAL 0x0BB00000
+#define CLK_DIV_FSYS1_VAL NOT_AVAILABLE
+#define CLK_DIV_FSYS2_VAL NOT_AVAILABLE
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL 0
+#define MUX_CPU_SEL 0
+#define MUX_APLL_SEL 1
+
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
+ | (MUX_CPU_SEL << 16) \
+ | (MUX_APLL_SEL))
+
/* CLK_SRC_CDREX */
#define CLK_SRC_CDREX_VAL 0x1
/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL NOT_AVAILABLE
+#define CLK_DIV_CDREX1_VAL NOT_AVAILABLE
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL NOT_AVAILABLE
+
#define MCLK_CDREX2_RATIO 0x0
#define ACLK_EFCON_RATIO 0x1
#define MCLK_DPHY_RATIO 0x1
| (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+#define CLK_SRC_TOP4_VAL NOT_AVAILABLE
+#define CLK_SRC_TOP5_VAL NOT_AVAILABLE
+#define CLK_SRC_TOP6_VAL NOT_AVAILABLE
+#define CLK_SRC_TOP7_VAL NOT_AVAILABLE
+
/* CLK_DIV_TOP0 */
#define ACLK_300_DISP1_RATIO 0x2
#define ACLK_400_G3D_RATIO 0x0
| (ACLK_400_IOP_RATIO << 16) \
| (ACLK_300_GSCL_RATIO << 12))
-/* APLL_LOCK */
-#define APLL_LOCK_VAL (0x546)
-/* MPLL_LOCK */
-#define MPLL_LOCK_VAL (0x546)
-/* CPLL_LOCK */
-#define CPLL_LOCK_VAL (0x546)
-/* GPLL_LOCK */
-#define GPLL_LOCK_VAL (0x546)
-/* EPLL_LOCK */
-#define EPLL_LOCK_VAL (0x3A98)
-/* VPLL_LOCK */
-#define VPLL_LOCK_VAL (0x3A98)
-/* BPLL_LOCK */
-#define BPLL_LOCK_VAL (0x546)
+#define CLK_DIV_TOP2_VAL NOT_AVAILABLE
-#define MUX_APLL_SEL_MASK (1 << 0)
-#define MUX_MPLL_SEL_MASK (1 << 8)
-#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8)
-#define MUX_CPLL_SEL_MASK (1 << 8)
-#define MUX_EPLL_SEL_MASK (1 << 12)
-#define MUX_VPLL_SEL_MASK (1 << 16)
-#define MUX_GPLL_SEL_MASK (1 << 28)
-#define MUX_BPLL_SEL_MASK (1 << 0)
-#define MUX_HPM_SEL_MASK (1 << 20)
-#define HPM_SEL_SCLK_MPLL (1 << 21)
-#define APLL_CON0_LOCKED (1 << 29)
-#define MPLL_CON0_LOCKED (1 << 29)
-#define BPLL_CON0_LOCKED (1 << 29)
-#define CPLL_CON0_LOCKED (1 << 29)
-#define EPLL_CON0_LOCKED (1 << 29)
-#define GPLL_CON0_LOCKED (1 << 29)
-#define VPLL_CON0_LOCKED (1 << 29)
-#define CLK_REG_DISABLE 0x0
-#define TOP2_VAL 0x0110000
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR 250
+#define PLL_X_LOCK_FACTOR 3000
/* CLK_SRC_PERIC0 */
#define PWM_SEL 6
| (SPI1_SEL << 20) \
| (SPI0_SEL << 16))
-/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
-#define SPI0_ISP_SEL 6
-#define SPI1_ISP_SEL 6
-#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \
- | (SPI0_ISP_SEL << 0)
-
-/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
-#define SPI0_ISP_RATIO 0xf
-#define SPI1_ISP_RATIO 0xf
-#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \
- | (SPI0_ISP_RATIO << 0)
-
/* CLK_DIV_PERIL0 */
#define UART5_RATIO 7
#define UART4_RATIO 7
#define PWM_RATIO 8
#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0)
-/* CLK_DIV_FSYS2 */
-#define MMC2_RATIO_MASK 0xf
-#define MMC2_RATIO_VAL 0x3
-#define MMC2_RATIO_OFFSET 0
-#define MMC2_PRE_RATIO_MASK 0xff
-#define MMC2_PRE_RATIO_VAL 0x9
-#define MMC2_PRE_RATIO_OFFSET 8
+/* CLK_DIV_PERIC4 */
+#define CLK_DIV_PERIC4_VAL NOT_AVAILABLE
-#define MMC3_RATIO_MASK 0xf
-#define MMC3_RATIO_VAL 0x1
-#define MMC3_RATIO_OFFSET 16
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL 0x6
+#define CLK_DIV_DISP1_0_VAL NOT_AVAILABLE
-#define MMC3_PRE_RATIO_MASK 0xff
-#define MMC3_PRE_RATIO_VAL 0x0
-#define MMC3_PRE_RATIO_OFFSET 24
+#define APLL_FOUT (1 << 0)
+#define KPLL_FOUT NOT_AVAILABLE
-/* CLK_SRC_LEX */
-#define CLK_SRC_LEX_VAL 0x0
+#define CLK_DIV_CPERI1_VAL NOT_AVAILABLE
-/* CLK_DIV_LEX */
-#define CLK_DIV_LEX_VAL 0x10
+#else
+#define PAD_RETENTION_DRAM_COREBLK_VAL 0x10000000
-/* CLK_DIV_R0X */
-#define CLK_DIV_R0X_VAL 0x10
+/* APLL_CON1 */
+#define APLL_CON1_VAL (0x0020F300)
-/* CLK_DIV_L0X */
-#define CLK_DIV_R1X_VAL 0x10
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL (0x0020F300)
-/* CLK_DIV_ISP0 */
-#define CLK_DIV_ISP0_VAL 0x31
-/* CLK_DIV_ISP1 */
-#define CLK_DIV_ISP1_VAL 0x0
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL 0x0020f300
-/* CLK_DIV_ISP2 */
-#define CLK_DIV_ISP2_VAL 0x1
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL (0x0020F300)
-/* CLK_SRC_DISP1_0 */
-#define CLK_SRC_DISP1_0_VAL 0x6
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL (NOT_AVAILABLE)
-/*
- * DIV_DISP1_0
- * For DP, divisor should be 2
- */
-#define CLK_DIV_DISP1_0_FIMD1 (2 << 0)
-/* CLK_GATE_IP_DISP1 */
-#define CLK_GATE_DP1_ALLOW (1 << 4)
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL 0x00000000
+#define EPLL_CON2_VAL 0x00000080
-#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
-#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL 0x0020f300
+#define VPLL_CON2_VAL NOT_AVAILABLE
-#define PHY_CON0_RESET_VAL 0x17020a40
-#define P0_CMD_EN (1 << 14)
-#define BYTE_RDLVL_EN (1 << 13)
-#define CTRL_SHGATE (1 << 8)
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL 0x00000000
+#define RPLL_CON2_VAL 0x00000080
-#define PHY_CON1_RESET_VAL 0x09210100
-#define CTRL_GATEDURADJ_MASK (0xf << 20)
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL 0x0020f300
-#define PHY_CON2_RESET_VAL 0x00010004
-#define INIT_DESKEW_EN (1 << 6)
-#define RDLVL_GATE_EN (1 << 24)
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL 0x0020f300
-/*ZQ Configurations */
-#define PHY_CON16_RESET_VAL 0x08000304
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL 0x00000080
-#define ZQ_CLK_DIV_EN (1 << 18)
-#define ZQ_MANUAL_STR (1 << 1)
-#define ZQ_DONE (1 << 0)
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL 0x200000
-#define CTRL_RDLVL_GATE_ENABLE 1
-#define CTRL_RDLVL_GATE_DISABLE 1
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL 0x33366000
+#define CLK_DIV_ISP0_VAL 0x13131300
+#define CLK_DIV_ISP1_VAL 0xbb110202
-/* Direct Command */
-#define DIRECT_CMD_NOP 0x07000000
-#define DIRECT_CMD_PALL 0x01000000
-#define DIRECT_CMD_ZQINIT 0x0a000000
-#define DIRECT_CMD_CHANNEL_SHIFT 28
-#define DIRECT_CMD_CHIP_SHIFT 20
-/* DMC PHY Control0 register */
-#define PHY_CONTROL0_RESET_VAL 0x0
-#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
-#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */
-#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */
-#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL 0x33033300
+#define CLK_DIV_FSYS0_VAL 0x0
+#define CLK_DIV_FSYS1_VAL 0x04f13c4f
+#define CLK_DIV_FSYS2_VAL 0x041d0000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL 1
+#define MUX_CPU_SEL 0
+#define MUX_APLL_SEL 1
-/* Driver strength for CK, CKE, CS & CA */
-#define IMP_OUTPUT_DRV_40_OHM 0x5
-#define IMP_OUTPUT_DRV_30_OHM 0x7
-#define CA_CK_DRVR_DS_OFFSET 9
-#define CA_CKE_DRVR_DS_OFFSET 6
-#define CA_CS_DRVR_DS_OFFSET 3
-#define CA_ADR_DRVR_DS_OFFSET 0
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
+ | (MUX_CPU_SEL << 16) \
+ | (MUX_APLL_SEL))
-#define PHY_CON42_CTRL_BSTLEN_SHIFT 8
-#define PHY_CON42_CTRL_RDLAT_SHIFT 0
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL 0x00000011
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL 0x30010100
+#define CLK_DIV_CDREX1_VAL 0x300
+
+#define CLK_DIV_CDREX_VAL 0x17010100
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL 0x01440020
+
+/* CLK_SRC_TOP */
+#define CLK_SRC_TOP0_VAL 0x12221222
+#define CLK_SRC_TOP1_VAL 0x00100200
+#define CLK_SRC_TOP2_VAL 0x11101000
+#define CLK_SRC_TOP3_VAL 0x11111111
+#define CLK_SRC_TOP4_VAL 0x11110111
+#define CLK_SRC_TOP5_VAL 0x11111100
+#define CLK_SRC_TOP6_VAL 0x11110111
+#define CLK_SRC_TOP7_VAL 0x00022200
+
+/* CLK_DIV_TOP */
+#define CLK_DIV_TOP0_VAL 0x23712311
+#define CLK_DIV_TOP1_VAL 0x13100B00
+#define CLK_DIV_TOP2_VAL 0x11101100
+
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR 200
+#define PLL_X_LOCK_FACTOR 3000
+
+/* CLK_SRC_PERIC0 */
+#define SPDIF_SEL 1
+#define PWM_SEL 3
+#define UART4_SEL 3
+#define UART3_SEL 3
+#define UART2_SEL 3
+#define UART1_SEL 3
+#define UART0_SEL 3
+/* SRC_CLOCK = SCLK_RPLL */
+#define CLK_SRC_PERIC0_VAL ((SPDIF_SEL << 28) \
+ | (PWM_SEL << 24) \
+ | (UART4_SEL << 20) \
+ | (UART3_SEL << 16) \
+ | (UART2_SEL << 12) \
+ | (UART1_SEL << 8) \
+ | (UART0_SEL << 4))
+
+/* CLK_SRC_PERIC1 */
+/* SRC_CLOCK = SCLK_EPLL */
+#define SPI0_SEL 6
+#define SPI1_SEL 6
+#define SPI2_SEL 6
+#define AUDIO0_SEL 6
+#define AUDIO1_SEL 6
+#define AUDIO2_SEL 6
+#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 28) \
+ | (SPI1_SEL << 24) \
+ | (SPI0_SEL << 20) \
+ | (AUDIO2_SEL << 16) \
+ | (AUDIO2_SEL << 12) \
+ | (AUDIO2_SEL << 8))
+
+/* CLK_DIV_PERIC0 */
+#define PWM_RATIO 8
+#define UART4_RATIO 9
+#define UART3_RATIO 9
+#define UART2_RATIO 9
+#define UART1_RATIO 9
+#define UART0_RATIO 9
+
+#define CLK_DIV_PERIC0_VAL ((PWM_RATIO << 28) \
+ | (UART4_RATIO << 24) \
+ | (UART3_RATIO << 20) \
+ | (UART2_RATIO << 16) \
+ | (UART1_RATIO << 12) \
+ | (UART0_RATIO << 8))
+/* CLK_DIV_PERIC1 */
+#define SPI2_RATIO 0x1
+#define SPI1_RATIO 0x1
+#define SPI0_RATIO 0x1
+#define CLK_DIV_PERIC1_VAL ((SPI2_RATIO << 28) \
+ | (SPI1_RATIO << 24) \
+ | (SPI0_RATIO << 20))
+
+/* CLK_DIV_PERIC2 */
+#define PCM2_RATIO 0x3
+#define PCM1_RATIO 0x3
+#define CLK_DIV_PERIC2_VAL ((PCM2_RATIO << 24) \
+ | (PCM1_RATIO << 16))
+
+/* CLK_DIV_PERIC3 */
+#define AUDIO2_RATIO 0x5
+#define AUDIO1_RATIO 0x5
+#define AUDIO0_RATIO 0x5
+#define CLK_DIV_PERIC3_VAL ((AUDIO2_RATIO << 28) \
+ | (AUDIO1_RATIO << 24) \
+ | (AUDIO0_RATIO << 20))
+
+/* CLK_DIV_PERIC4 */
+#define SPI2_PRE_RATIO 0x2
+#define SPI1_PRE_RATIO 0x2
+#define SPI0_PRE_RATIO 0x2
+#define CLK_DIV_PERIC4_VAL ((SPI2_PRE_RATIO << 24) \
+ | (SPI1_PRE_RATIO << 16) \
+ | (SPI0_PRE_RATIO << 8))
+
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL 0x10666600
+#define CLK_DIV_DISP1_0_VAL 0x01050211
+
+#define APLL_FOUT (1 << 0)
+#define KPLL_FOUT (1 << 0)
+
+#define CLK_DIV_CPERI1_VAL 0x3f3f0000
+#endif
struct mem_timings;
};
/*
- * Memory variant specific initialization code
+ * Memory variant specific initialization code for DDR3
*
* @param mem Memory timings for this memory type.
* @param mem_iv_size Memory interleaving size is a configurable parameter
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
int reset);
+/* Memory variant specific initialization code for LPDDR3 */
+void lpddr3_mem_ctrl_init(void);
+
/*
* Configure ZQ I/O interface
*
* @param mem Memory timings for this memory type.
- * @param phy0_ctrl Pointer to struct containing PHY0 control reg
- * @param phy1_ctrl Pointer to struct containing PHY1 control reg
+ * @param phy0_con16 Register address for dmc_phy0->phy_con16
+ * @param phy1_con16 Register address for dmc_phy1->phy_con16
+ * @param phy0_con17 Register address for dmc_phy0->phy_con17
+ * @param phy1_con17 Register address for dmc_phy1->phy_con17
* @return 0 if ok, -1 on error
*/
-int dmc_config_zq(struct mem_timings *mem,
- struct exynos5_phy_control *phy0_ctrl,
- struct exynos5_phy_control *phy1_ctrl);
-
+int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
+ uint32_t *phy1_con16, uint32_t *phy0_con17,
+ uint32_t *phy1_con17);
/*
* Send NOP and MRS/EMRS Direct commands
*
* @param mem Memory timings for this memory type.
- * @param dmc Pointer to struct of DMC registers
+ * @param directcmd Register address for dmc_phy->directcmd
*/
-void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc);
+void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd);
/*
* Send PALL Direct commands
*
* @param mem Memory timings for this memory type.
- * @param dmc Pointer to struct of DMC registers
- */
-void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc);
-
-/*
- * Configure the memconfig and membaseconfig registers
- *
- * @param mem Memory timings for this memory type.
- * @param exynos5_dmc Pointer to struct of DMC registers
+ * @param directcmd Register address for dmc_phy->directcmd
*/
-void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
+void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd);
/*
* Reset the DLL. This function is common between DDR3 and LPDDR2.
* However, the reset value is different. So we are passing a flag
* ddr_mode to distinguish between LPDDR2 and DDR3.
*
- * @param exynos5_dmc Pointer to struct of DMC registers
+ * @param phycontrol0 Register address for dmc_phy->phycontrol0
* @param ddr_mode Type of DDR memory
*/
-void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
+void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode);
#endif
projects / platform / kernel / u-boot.git / blobdiff