/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* Timing tables for each SOC for all four oscillator options.
*/
struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
- /* T20: 1 GHz */
- /* n, m, p, cpcon */
- {{ 1000, 13, 0, 12}, /* OSC 13M */
- { 625, 12, 0, 8}, /* OSC 19.2M */
- { 1000, 12, 0, 12}, /* OSC 12M */
- { 1000, 26, 0, 12}, /* OSC 26M */
+ /*
+ * T20: 1 GHz
+ *
+ * Register Field Bits Width
+ * ------------------------------
+ * PLLX_BASE p 22:20 3
+ * PLLX_BASE n 17: 8 10
+ * PLLX_BASE m 4: 0 5
+ * PLLX_MISC cpcon 11: 8 4
+ */
+ {
+ { .n = 1000, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+ { .n = 625, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
+ { .n = 1000, .m = 12, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+ { .n = 1000, .m = 26, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
},
-
- /* T25: 1.2 GHz */
- {{ 923, 10, 0, 12},
- { 750, 12, 0, 8},
- { 600, 6, 0, 12},
- { 600, 13, 0, 12},
+ /*
+ * T25: 1.2 GHz
+ *
+ * Register Field Bits Width
+ * ------------------------------
+ * PLLX_BASE p 22:20 3
+ * PLLX_BASE n 17: 8 10
+ * PLLX_BASE m 4: 0 5
+ * PLLX_MISC cpcon 11: 8 4
+ */
+ {
+ { .n = 923, .m = 10, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+ { .n = 750, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
+ { .n = 600, .m = 6, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+ { .n = 600, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
},
-
- /* T30: 1.4 GHz */
- {{ 862, 8, 0, 8},
- { 583, 8, 0, 4},
- { 700, 6, 0, 8},
- { 700, 13, 0, 8},
+ /*
+ * T30: 1.4 GHz
+ *
+ * Register Field Bits Width
+ * ------------------------------
+ * PLLX_BASE p 22:20 3
+ * PLLX_BASE n 17: 8 10
+ * PLLX_BASE m 4: 0 5
+ * PLLX_MISC cpcon 11: 8 4
+ */
+ {
+ { .n = 862, .m = 8, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
+ { .n = 583, .m = 8, .p = 0, .cpcon = 4 }, /* OSC: 19.2 MHz */
+ { .n = 700, .m = 6, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
+ { .n = 700, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
+ },
+ /*
+ * T114: 700 MHz
+ *
+ * Register Field Bits Width
+ * ------------------------------
+ * PLLX_BASE p 23:20 4
+ * PLLX_BASE n 15: 8 8
+ * PLLX_BASE m 7: 0 8
+ */
+ {
+ { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+ { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+ { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
},
- /* T114: 1.4 GHz */
- {{ 862, 8, 0, 8},
- { 583, 8, 0, 4},
- { 696, 12, 0, 8},
- { 700, 13, 0, 8},
+ /*
+ * T124: 700 MHz
+ *
+ * Register Field Bits Width
+ * ------------------------------
+ * PLLX_BASE p 23:20 4
+ * PLLX_BASE n 15: 8 8
+ * PLLX_BASE m 7: 0 8
+ */
+ {
+ { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+ { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+ { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
},
};
-void adjust_pllp_out_freqs(void)
+static inline void pllx_set_iddq(void)
{
+#if defined(CONFIG_TEGRA124)
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH];
u32 reg;
- /* Set T30 PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */
- reg = readl(&pll->pll_out[0]); /* OUTA, contains OUT2 / OUT1 */
- reg |= (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) | PLLP_OUT2_OVR
- | (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) | PLLP_OUT1_OVR;
- writel(reg, &pll->pll_out[0]);
-
- reg = readl(&pll->pll_out[1]); /* OUTB, contains OUT4 / OUT3 */
- reg |= (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) | PLLP_OUT4_OVR
- | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) | PLLP_OUT3_OVR;
- writel(reg, &pll->pll_out[1]);
+ /* Disable IDDQ */
+ reg = readl(&clkrst->crc_pllx_misc3);
+ reg &= ~PLLX_IDDQ_MASK;
+ writel(reg, &clkrst->crc_pllx_misc3);
+ udelay(2);
+ debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__,
+ readl(&clkrst->crc_pllx_misc3));
+#endif
}
int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
u32 divp, u32 cpcon)
{
+ int chip = tegra_get_chip();
u32 reg;
/* If PLLX is already enabled, just return */
debug(" pllx_set_rate entry\n");
+ pllx_set_iddq();
+
/* Set BYPASS, m, n and p to PLLX_BASE */
reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT);
reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT));
writel(reg, &pll->pll_base);
/* Set cpcon to PLLX_MISC */
- reg = (cpcon << PLL_CPCON_SHIFT);
+ if (chip == CHIPID_TEGRA20 || chip == CHIPID_TEGRA30)
+ reg = (cpcon << PLL_CPCON_SHIFT);
+ else
+ reg = 0;
/* Set dccon to PLLX_MISC if freq > 600MHz */
if (divn > 600)
reg |= (1 << PLL_DCCON_SHIFT);
writel(reg, &pll->pll_misc);
- /* Enable PLLX */
- reg = readl(&pll->pll_base);
- reg |= PLL_ENABLE_MASK;
-
/* Disable BYPASS */
+ reg = readl(&pll->pll_base);
reg &= ~PLL_BYPASS_MASK;
writel(reg, &pll->pll_base);
+ debug("pllx_set_rate: base = 0x%08X\n", reg);
/* Set lock_enable to PLLX_MISC */
reg = readl(&pll->pll_misc);
reg |= PLL_LOCK_ENABLE_MASK;
writel(reg, &pll->pll_misc);
+ debug("pllx_set_rate: misc = 0x%08X\n", reg);
+
+ /* Enable PLLX last, once it's all configured */
+ reg = readl(&pll->pll_base);
+ reg |= PLL_ENABLE_MASK;
+ writel(reg, &pll->pll_base);
+ debug("pllx_set_rate: base final = 0x%08X\n", reg);
return 0;
}
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
struct clk_pll_simple *pll = &clkrst->crc_pll_simple[SIMPLE_PLLX];
- int chip_type;
+ int soc_type, sku_info, chip_sku;
enum clock_osc_freq osc;
struct clk_pll_table *sel;
debug("init_pllx entry\n");
- /* get chip type */
- chip_type = tegra_get_chip_type();
- debug(" init_pllx: chip_type = %d\n", chip_type);
+ /* get SOC (chip) type */
+ soc_type = tegra_get_chip();
+ debug(" init_pllx: SoC = 0x%02X\n", soc_type);
+
+ /* get SKU info */
+ sku_info = tegra_get_sku_info();
+ debug(" init_pllx: SKU info byte = 0x%02X\n", sku_info);
+
+ /* get chip SKU, combo of the above info */
+ chip_sku = tegra_get_chip_sku();
+ debug(" init_pllx: Chip SKU = %d\n", chip_sku);
/* get osc freq */
osc = clock_get_osc_freq();
- debug(" init_pllx: osc = %d\n", osc);
+ debug(" init_pllx: osc = %d\n", osc);
/* set pllx */
- sel = &tegra_pll_x_table[chip_type][osc];
+ sel = &tegra_pll_x_table[chip_sku][osc];
pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon);
-
- /* adjust PLLP_out1-4 on T30/T114 */
- if (chip_type == TEGRA_SOC_T30 || chip_type == TEGRA_SOC_T114) {
- debug(" init_pllx: adjusting PLLP out freqs\n");
- adjust_pllp_out_freqs();
- }
}
void enable_cpu_clock(int enable)
void clock_enable_coresight(int enable)
{
u32 rst, src = 2;
- int chip;
debug("clock_enable_coresight entry\n");
clock_set_enable(PERIPH_ID_CORESIGHT, enable);
if (enable) {
/*
- * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by
- * 1.5, giving an effective frequency of 144MHz.
- * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor
- * (bits 7:0), so 00000001b == 1.5 (n+1 + .5)
- *
- * Clock divider request for 204MHz would setup CSITE clock as
- * 144MHz for PLLP base 216MHz and 204MHz for PLLP base 408MHz
+ * Put CoreSight on PLLP_OUT0 and divide it down as per
+ * PLLP base frequency based on SoC type (T20/T30+).
+ * Clock divider request would setup CSITE clock as 144MHz
+ * for PLLP base 216MHz and 204MHz for PLLP base 408MHz
*/
- chip = tegra_get_chip_type();
- if (chip == TEGRA_SOC_T30 || chip == TEGRA_SOC_T114)
- src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000);
- else if (chip == TEGRA_SOC_T20 || chip == TEGRA_SOC_T25)
- src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
- else
- printf("%s: Unknown chip type %X!\n", __func__, chip);
+ src = CLK_DIVIDER(NVBL_PLLP_KHZ, CSITE_KHZ);
clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
/* Unlock the CPU CoreSight interfaces */
void halt_avp(void)
{
for (;;) {
- writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \
- | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)),
- FLOW_CTLR_HALT_COP_EVENTS);
+ writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29),
+ FLOW_CTLR_HALT_COP_EVENTS);
}
}
projects / platform / kernel / u-boot.git / blobdiff