ARM: dts: omap3-gta04a5: uses different sensors than gta04a4

[platform/kernel/linux-starfive.git] / arch / arm / boot / dts / omap3-gta04a5.dts

diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 600b6ca..973d07d 100644 (file)
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,9 +9,126 @@
 #include "omap3-gta04.dtsi"
 
 / {
-       model = "Goldelico GTA04A5";
+       model = "Goldelico GTA04A5/Letux 2804";
 
        sound {
-               ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
+               ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;      /* GTA04A5 only */
+       };
+
+       wlan_en: wlan_en_regulator {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wlan_pins>;
+               regulator-name = "wlan-en-regulator";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+
+               gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;    /* GPIO_138 */
+
+               startup-delay-us = <70000>;
+               enable-active-high;
+       };
+
+       pps {
+               compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pps_pins>;
+
+               gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+       };
+
+};
+
+&gpio5 {
+       irda_en {
+               gpio-hog;
+               gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+               output-high;    /* activate gpio_175 to disable IrDA receiver */
+       };
+};
+
+&omap3_pmx_core {
+       wlan_pins: pinmux_wlan_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)       /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+               >;
+       };
+
+       wlan_irq_pin: pinmux_wlan_irq_pin {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+               >;
+       };
+
+       irda_pins: pinmux_irda {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)        /* mcspi1_cs1 = gpio175 */
+               >;
+       };
+
+       pps_pins: pinmux_pps_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+               >;
+       };
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+       /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+       vmmc-supply = <&wlan_en>;
+       bus-width = <4>;
+       cap-power-off-card;
+       non-removable;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&wlan_irq_pin>;
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       /delete-property/ mmc-pwrseq;
+
+       wlcore: wlcore@2 {
+               compatible = "ti,wl1837";
+               reg = <2>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;  /* GPIO_139 */
+               ref-clock-frequency = <26000000>;
+       };
+};
+
+&i2c2 {
+       /delete-node/ bmp085@77;
+       /delete-node/ bma180@41;
+       /delete-node/ itg3200@68;
+       /delete-node/ hmc5843@1e;
+
+       bmg160@69 {
+               compatible = "bosch,bmg160";
+               reg = <0x69>;
+       };
+
+       bmc150@10 {
+               compatible = "bosch,bmc150_accel";
+               reg = <0x10>;
+       };
+
+       bmc150@12 {
+               compatible = "bosch,bmc150_magn";
+               reg = <0x12>;
+       };
+
+       bme280@76 {
+               compatible = "bosch,bme280";
+               reg = <0x76>;
        };
 };