default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
+config ARCH_CPU_INIT
+ bool "Enable ARCH_CPU_INIT"
+ help
+ Some architectures require a call to arch_cpu_init()
+ Say Y here to enable it
+
config SYS_ARCH_TIMER
bool "ARM Generic Timer support"
depends on CPU_V7A || ARM64
config SPL_SYS_THUMB_BUILD
bool "Build SPL using the Thumb instruction set"
default y if SYS_THUMB_BUILD
- depends on !ARM64
+ depends on !ARM64 && SPL
help
Use this flag to build SPL using the Thumb instruction set for
ARM architectures. Thumb instruction set provides better code
config SPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
- depends on !ARM64
+ depends on !ARM64 && SPL
help
Enable the generation of an optimized version of memcpy.
Such implementation may be faster under some conditions
config TPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for TPL"
default y if USE_ARCH_MEMCPY
- depends on !ARM64
+ depends on !ARM64 && TPL
help
Enable the generation of an optimized version of memcpy.
Such implementation may be faster under some conditions
config SPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
- depends on !ARM64
+ depends on !ARM64 && SPL
help
Enable the generation of an optimized version of memset.
Such implementation may be faster under some conditions
config TPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for TPL"
default y if USE_ARCH_MEMSET
- depends on !ARM64
+ depends on !ARM64 && TPL
help
Enable the generation of an optimized version of memset.
Such implementation may be faster under some conditions
but may increase the binary size.
+config SET_STACK_SIZE
+ bool "Enable an option to set max stack size that can be used"
+ default y if ARCH_VERSAL || ARCH_ZYNQMP
+ help
+ This will enable an option to set max stack size that can be
+ used by u-boot.
+
+config STACK_SIZE
+ hex "Define max stack size that can be used by u-boot"
+ depends on SET_STACK_SIZE
+ default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP
+ help
+ Defines Max stack size that can be used by u-boot so that the
+ initrd_high will be calculated as base stack pointer minus this
+ stack size.
+
config ARM64_SUPPORT_AARCH32
bool "ARM64 system support AArch32 execution state"
- default y if ARM64 && !TARGET_THUNDERX_88XX
+ depends on ARM64
+ default y if !TARGET_THUNDERX_88XX
help
This ARM64 system supports AArch32 execution state.
select ARCH_MISC_INIT
select BOARD_EARLY_INIT_F
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
imply MXC_GPIO
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select SYSRESET
select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
- select SYSRESET_SOCFPGA_STRATIX10 if TARGET_SOCFPGA_STRATIX10
+ select SYSRESET_SOCFPGA_S10 if TARGET_SOCFPGA_STRATIX10
imply CMD_DM
imply CMD_MTDPARTS
imply CRC32_VERIFY
select USB if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
imply CMD_GPT
imply CMD_UBI if NAND
select DM_MMC if MMC
select DM_SERIAL
select OF_CONTROL
+ imply BOARD_LATE_INIT
config ARCH_VF610
bool "Freescale Vybrid"
select CLK
select DM
select DM_ETH if NET
+ select DM_MAILBOX
select DM_MMC if MMC
select DM_SERIAL
select DM_SPI if SPI
select DM_SPI_FLASH if DM_SPI
select DM_USB if USB
+ select FIRMWARE
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
+ select SPL_DM_MAILBOX if SPL
+ select SPL_FIRMWARE if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
+ select ZYNQMP_IPI
imply BOARD_LATE_INIT
imply CMD_DM
imply FAT_WRITE
select PL01X_SERIAL
select SEMIHOSTING
-config TARGET_VEXPRESS64_BASE_FVP_DRAM
- bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
- select ARM64
- select PL01X_SERIAL
- help
- This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
- the default config to allow the user to load the images directly into
- DRAM using model parameters rather than by using semi-hosting to load
- the files from the host filesystem.
-
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
help
Support for Freescale LS2080A_SIMU platform
The LS2080A Development System (QDS) is a pre silicon
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
+config TARGET_HIKEY960
+ bool "Support HiKey960 96boards Consumer Edition Platform"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+ select PL01X_SERIAL
+ imply CMD_DM
+ help
+ Support for HiKey960 96boards platform. It features a HI3660
+ SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM.
+
config TARGET_POPLAR
bool "Support Poplar 96boards Enterprise Edition Platform"
select ARM64
select ARM64
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
+ select BOARD_LATE_INIT
+ select ARCH_MISC_INIT
help
Support for Freescale LS1028AQDS platform
The LS1028A Development System (QDS) is a high-performance
imply SPL_SYSRESET
imply CMD_DM
imply CMD_POWEROFF
+ imply OF_LIBFDT_OVERLAY
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
imply USE_PREBOOT
help
source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/hikey960/Kconfig"
source "board/hisilicon/poplar/Kconfig"
source "board/isee/igep003x/Kconfig"
source "board/phytec/pcm051/Kconfig"