config THUMB2_KERNEL
bool
+config SYS_ARM_CACHE_CP15
+ bool "CP15 based cache enabling support"
+ help
+ Select this if your processor suports enabling caches by using
+ CP15 registers.
+
+config SYS_ARM_MMU
+ bool "MMU-based Paged Memory Management Support"
+ select SYS_ARM_CACHE_CP15
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management.
+
+config SYS_ARM_MPU
+ bool 'Use the ARM v7 PMSA Compliant MPU'
+ help
+ Some ARM systems without an MMU have instead a Memory Protection
+ Unit (MPU) that defines the type and permissions for regions of
+ memory.
+ If your CPU has an MPU then you should choose 'y' here unless you
+ know that you do not want to use the MPU.
+
# If set, the workarounds for these ARM errata are applied early during U-Boot
# startup. Note that in general these options force the workarounds to be
# applied; no CPU-type/version detection exists, unlike the similar options in
# CONFIG_ARM_ERRATA_621766
# CONFIG_ARM_ERRATA_798870
# CONFIG_ARM_ERRATA_801819
+# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+
config ARM_ERRATA_430973
bool
config ARM_ERRATA_855873
bool
+config ARM_CORTEX_A8_CVE_2017_5715
+ bool
+
+config ARM_CORTEX_A15_CVE_2017_5715
+ bool
+
config CPU_ARM720T
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_ARM920T
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_ARM926EJS
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_ARM946ES
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_ARM1136
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_ARM1176
bool
select HAS_VBAR
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
-config CPU_V7
+config CPU_V7A
bool
select HAS_VBAR
select HAS_THUMB2
select SYS_CACHE_SHIFT_6
+ imply SYS_ARM_MMU
config CPU_V7M
bool
select HAS_THUMB2
select THUMB2_KERNEL
select SYS_CACHE_SHIFT_5
+ select SYS_ARM_MPU
+ select SYS_THUMB_BUILD
+
+config CPU_V7R
+ bool
+ select HAS_THUMB2
+ select SYS_CACHE_SHIFT_6
+ select SYS_ARM_MPU
+ select SYS_ARM_CACHE_CP15
config CPU_PXA
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config CPU_SA1100
bool
select SYS_CACHE_SHIFT_5
+ imply SYS_ARM_MMU
config SYS_CPU
default "arm720t" if CPU_ARM720T
default "arm946es" if CPU_ARM946ES
default "arm1136" if CPU_ARM1136
default "arm1176" if CPU_ARM1176
- default "armv7" if CPU_V7
+ default "armv7" if CPU_V7A
+ default "armv7" if CPU_V7R
default "armv7m" if CPU_V7M
default "pxa" if CPU_PXA
default "sa1100" if CPU_SA1100
default 5 if CPU_ARM946ES
default 6 if CPU_ARM1136
default 6 if CPU_ARM1176
- default 7 if CPU_V7
+ default 7 if CPU_V7A
default 7 if CPU_V7M
+ default 7 if CPU_V7R
default 5 if CPU_PXA
default 4 if CPU_SA1100
default 8 if ARM64
default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
+config SYS_ARCH_TIMER
+ bool "ARM Generic Timer support"
+ depends on CPU_V7A || ARM64
+ default y if ARM64
+ help
+ The ARM Generic Timer (aka arch-timer) provides an architected
+ interface to a timer source on an SoC.
+ It is mandantory for ARMv8 implementation and widely available
+ on ARMv7 systems.
+
config ARM_SMCCC
bool "Support for ARM SMC Calling Convention (SMCCC)"
- depends on CPU_V7 || ARM64
+ depends on CPU_V7A || ARM64
select ARM_PSCI_FW
help
Say Y here if you want to enable ARM SMC Calling Convention.
bool "prepare BOOT0 header"
help
If the SoC's BOOT0 requires a header area filled with (magic)
- values, then choose this option, and create a define called
- ARM_SOC_BOOT0_HOOK which contains the required assembler
- preprocessor code.
+ values, then choose this option, and create a file included as
+ <asm/arch/boot0.h> which contains the required assembler code.
config ARM_CORTEX_CPU_IS_UP
bool
config ARCH_AT91
bool "Atmel AT91"
- select SPL_BOARD_INIT if SPL
+ select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
config TARGET_EDB93XX
bool "Support edb93xx"
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select SPI
config TARGET_DEVKIT3250
bool "Support devkit3250"
select CPU_ARM926EJS
select SUPPORT_SPL
-config TARGET_APX4DEVKIT
- bool "Support apx4devkit"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
-config TARGET_XFI3
- bool "Support xfi3"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
-config TARGET_M28EVK
- bool "Support m28evk"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
-config TARGET_MX23EVK
- bool "Support mx23evk"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
- select PL011_SERIAL
-
-config TARGET_MX28EVK
- bool "Support mx28evk"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
- select PL011_SERIAL
-
-config TARGET_MX23_OLINUXINO
- bool "Support mx23_olinuxino"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
- select PL011_SERIAL
-
-config TARGET_BG0900
- bool "Support bg0900"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
-config TARGET_SANSA_FUZE_PLUS
- bool "Support sansa_fuze_plus"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
-config TARGET_SC_SPS_1
- bool "Support sc_sps_1"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
config ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
config TARGET_STV0991
bool "Support stv0991"
- select CPU_V7
+ select CPU_V7A
select DM
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select SPI
select SPI_FLASH
select PL01X_SERIAL
select SUPPORT_SPL
select PL011_SERIAL
-config TARGET_IMX31_PHYCORE
- bool "Support imx31_phycore_eet"
- select CPU_ARM1136
- select BOARD_EARLY_INIT_F
-
-config TARGET_IMX31_PHYCORE_EET
- bool "Support imx31_phycore_eet"
- select BOARD_LATE_INIT
- select CPU_ARM1136
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX31ADS
- bool "Support mx31ads"
- select CPU_ARM1136
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX31PDK
- bool "Support mx31pdk"
- select BOARD_LATE_INIT
- select CPU_ARM1136
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
-
config TARGET_WOODBURN
bool "Support woodburn"
select CPU_ARM1136
select DM_GPIO
select OF_CONTROL
select PL01X_SERIAL
+ select SERIAL_SEARCH_ALL
imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select PL011_SERIAL
config TARGET_VEXPRESS_CA5X2
bool "Support vexpress_ca5x2"
- select CPU_V7
+ select CPU_V7A
select PL011_SERIAL
config TARGET_VEXPRESS_CA9X4
bool "Support vexpress_ca9x4"
- select CPU_V7
+ select CPU_V7A
select PL011_SERIAL
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
- select CPU_V7
+ select CPU_V7A
imply CRC32_VERIFY
imply FAT_WRITE
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
- select CPU_V7
+ select CPU_V7A
imply CRC32_VERIFY
imply FAT_WRITE
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
- select CPU_V7
+ select CPU_V7A
imply CRC32_VERIFY
imply CMD_HASH
imply FAT_WRITE
config TARGET_BCMNSP
bool "Support bcmnsp"
- select CPU_V7
+ select CPU_V7A
config TARGET_BCMNS2
bool "Support Broadcom Northstar2"
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
+ select SPI
imply FAT_WRITE
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
- select CPU_V7
+ select CPU_V7A
select DM
select DM_SERIAL
select DM_GPIO
config ARCH_HIGHBANK
bool "Calxeda Highbank"
- select CPU_V7
+ select CPU_V7A
select PL011_SERIAL
config ARCH_INTEGRATOR
config ARCH_KEYSTONE
bool "TI Keystone"
- select CPU_V7
+ select CPU_V7A
select SUPPORT_SPL
select SYS_THUMB_BUILD
select CMD_POWEROFF
+ select SYS_ARCH_TIMER
imply CMD_MTDPARTS
imply FIT
imply CMD_SAVES
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
- select CPU_V7
+ select CPU_V7A
select SPL_BOARD_INIT if SPL
select SPL_STACK_R if SPL
select SUPPORT_SPL
config ARCH_MESON
bool "Amlogic Meson"
+ imply DISTRO_DEFAULTS
help
Support for the Meson SoC family developed by Amlogic Inc.,
targeted at media players and tablet computers. We currently
support the S905 (GXBaby) 64-bit SoC.
+config ARCH_MX8M
+ bool "NXP i.MX8M platform"
+ select ARM64
+ select DM
+ select SUPPORT_SPL
+
+config ARCH_MX23
+ bool "NXP i.MX23 family"
+ select CPU_ARM926EJS
+ select PL011_SERIAL
+ select SUPPORT_SPL
+
config ARCH_MX25
bool "NXP MX25"
select CPU_ARM926EJS
+ imply MXC_GPIO
+
+config ARCH_MX28
+ bool "NXP i.MX28 family"
+ select CPU_ARM926EJS
+ select PL011_SERIAL
+ select SUPPORT_SPL
+
+config ARCH_MX31
+ bool "NXP i.MX31 family"
+ select CPU_ARM1136
config ARCH_MX7ULP
bool "NXP MX7ULP"
- select CPU_V7
+ select CPU_V7A
select ROM_UNIFIED_SECTIONS
+ imply MXC_GPIO
config ARCH_MX7
bool "Freescale MX7"
- select CPU_V7
+ select CPU_V7A
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
+ imply MXC_GPIO
config ARCH_MX6
bool "Freescale MX6"
- select CPU_V7
+ select CPU_V7A
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
+ imply MXC_GPIO
if ARCH_MX6
config SPL_LDSCRIPT
config ARCH_MX5
bool "Freescale MX5"
- select CPU_V7
+ select CPU_V7A
select BOARD_EARLY_INIT_F
+ imply MXC_GPIO
+
+config ARCH_OWL
+ bool "Actions Semi OWL SoCs"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
config ARCH_QEMU
bool "QEMU Virtual Platform"
config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
- select CPU_V7
- select SUPPORT_SPL
- select OF_CONTROL
- select SPL_OF_CONTROL
- select DM
- select DM_SPI_FLASH
- select DM_SPI
- select ENABLE_ARM_SOC_BOOT0_HOOK
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
- select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ select CPU_V7A
+ select DM
+ select DM_SERIAL
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select OF_CONTROL
+ select SPL_LIBCOMMON_SUPPORT
+ select SPL_LIBDISK_SUPPORT
+ select SPL_LIBGENERIC_SUPPORT
+ select SPL_MMC_SUPPORT if DM_MMC
+ select SPL_NAND_SUPPORT if SPL_NAND_DENALI
+ select SPL_OF_CONTROL
+ select SPL_SERIAL_SUPPORT
+ select SPL_DM_SERIAL
+ select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
+ select SPL_SPI_SUPPORT if DM_SPI
+ select SPL_WATCHDOG_SUPPORT
+ select SUPPORT_SPL
+ select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ select SYS_NS16550
select SYS_THUMB_BUILD
imply CMD_MTDPARTS
imply CRC32_VERIFY
+ imply DM_SPI
+ imply DM_SPI_FLASH
imply FAT_WRITE
+ imply HW_WATCHDOG
+ imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
+ select SPECIFY_CONSOLE_INDEX
select SPL_STACK_R if SPL
select SPL_SYS_MALLOC_SIMPLE if SPL
select SYS_NS16550
select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
imply CMD_GPT
+ imply DISTRO_DEFAULTS
imply FAT_WRITE
imply OF_LIBFDT_OVERLAY
imply PRE_CONSOLE_BUFFER
imply SPL_SERIAL_SUPPORT
imply USB_GADGET
-config TARGET_TS4600
- bool "Support TS4600"
- select CPU_ARM926EJS
- select SUPPORT_SPL
- select PL011_SERIAL
-
config ARCH_VF610
bool "Freescale Vybrid"
- select CPU_V7
+ select CPU_V7A
select SYS_FSL_ERRATUM_ESDHC111
imply CMD_MTDPARTS
imply NAND
config ARCH_ZYNQ
bool "Xilinx Zynq based platform"
select BOARD_LATE_INIT
- select CPU_V7
+ select CPU_V7A
select SUPPORT_SPL
select OF_CONTROL
select SPL_BOARD_INIT if SPL
+ select BOARD_EARLY_INIT_F if WDT
select SPL_OF_CONTROL if SPL
select DM
- select DM_ETH
- select DM_GPIO
+ select DM_ETH if NET
select SPL_DM if SPL
- select DM_MMC
+ select DM_MMC if MMC
select DM_SPI
select DM_SERIAL
select DM_SPI_FLASH
select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
- select BLK
select CLK
- select SPL_CLK
+ select SPL_CLK if SPL
select CLK_ZYNQ
+ select SPI
imply CMD_CLK
imply FAT_WRITE
imply CMD_SPL
+ imply ARCH_EARLY_INIT_R
+
+config ARCH_ZYNQMP_R5
+ bool "Xilinx ZynqMP R5 based platform"
+ select CPU_V7R
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
+ select CLK
config ARCH_ZYNQMP
bool "Xilinx ZynqMP based platform"
config TEGRA
bool "NVIDIA Tegra"
+ imply DISTRO_DEFAULTS
imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
select DM_SERIAL
select OF_CONTROL
select PL01X_SERIAL
+ select SPECIFY_CONSOLE_INDEX
help
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1012AFRWY
+ bool "Support ls1012afrwy"
+ select ARCH_LS1012A
+ select BOARD_LATE_INIT
+ select ARM64
+ imply SCSI
+ imply SCSI_AHCI
+ help
+ Support for Freescale LS1012AFRWY platform.
+ The LS1012A FRWY board (FRWY) is a high-performance
+ development platform that supports the QorIQ LS1012A
+ Layerscape Architecture processor.
+
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
select ARCH_LS1012A
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select BOARD_LATE_INIT
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select BOARD_LATE_INIT
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
select BOARD_LATE_INIT
- select CPU_V7
+ select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
(formerly, System LSI Business Division of Panasonic Corporation)
config STM32
- bool "Support STM32"
+ bool "Support STMicroelectronics STM32 MCU with cortex M"
select CPU_V7M
select DM
select DM_SERIAL
config ARCH_STI
bool "Support STMicrolectronics SoCs"
- select CPU_V7
+ select CPU_V7A
select DM
select DM_SERIAL
select BLK
Support for STMicroelectronics STiH407/10 SoC family.
This SoC is used on Linaro 96Board STiH410-B2260
+config ARCH_STM32MP
+ bool "Support STMicroelectronics STM32MP Socs with cortex A"
+ select ARCH_MISC_INIT
+ select BOARD_LATE_INIT
+ select CLK
+ select DM
+ select DM_GPIO
+ select DM_RESET
+ select DM_SERIAL
+ select OF_CONTROL
+ select OF_LIBFDT
+ select MISC
+ select PINCTRL
+ select REGMAP
+ select SUPPORT_SPL
+ select SYSCON
+ select SYSRESET
+ select SYS_THUMB_BUILD
+ help
+ Support for STM32MP SoC family developed by STMicroelectronics,
+ MPUs based on ARM cortex A core
+ U-BOOT is running in DDR and SPL support is the unsecure First Stage
+ BootLoader (FSBL)
+
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
select OF_CONTROL
select DM_PWM
select DM_REGULATOR
select ENABLE_ARM_SOC_BOOT0_HOOK
- imply CMD_FASTBOOT
- imply FASTBOOT
+ select SPI
+ imply DISTRO_DEFAULTS
imply FAT_WRITE
imply USB_FUNCTION_FASTBOOT
imply SPL_SYSRESET
imply TPL_SYSRESET
imply ADC
imply SARADC_ROCKCHIP
+ imply SYS_NS16550
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
endchoice
+config TI_SECURE_DEVICE
+ bool "HS Device Type Support"
+ depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
+ help
+ If a high secure (HS) device type is being used, this config
+ must be set. This option impacts various aspects of the
+ build system (to create signed boot images that can be
+ authenticated) and the code. See the doc/README.ti-secure
+ file for further details.
+
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-imx/mx2/Kconfig"
-source "arch/arm/mach-imx/mx7ulp/Kconfig"
+source "arch/arm/mach-imx/mx3/Kconfig"
-source "arch/arm/mach-imx/mx7/Kconfig"
+source "arch/arm/mach-imx/mx5/Kconfig"
source "arch/arm/mach-imx/mx6/Kconfig"
-source "arch/arm/mach-imx/mx5/Kconfig"
+source "arch/arm/mach-imx/mx7/Kconfig"
+
+source "arch/arm/mach-imx/mx7ulp/Kconfig"
+
+source "arch/arm/mach-imx/mx8m/Kconfig"
+
+source "arch/arm/mach-imx/mxs/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-owl/Kconfig"
+
source "arch/arm/mach-rmobile/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
+source "arch/arm/mach-stm32mp/Kconfig"
+
source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
+source "arch/arm/mach-zynqmp-r5/Kconfig"
+
source "arch/arm/cpu/armv7/Kconfig"
source "arch/arm/cpu/armv8/zynqmp/Kconfig"
source "arch/arm/mach-imx/Kconfig"
-source "board/aries/m28evk/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/armadeus/apf27/Kconfig"
source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
-source "board/bluegiga/apx4devkit/Kconfig"
source "board/broadcom/bcm23550_w1d/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
source "board/broadcom/bcmcygnus/Kconfig"
source "board/broadcom/bcmns2/Kconfig"
source "board/cavium/thunderx/Kconfig"
source "board/cirrus/edb93xx/Kconfig"
-source "board/creative/xfi3/Kconfig"
source "board/eets/pdu001/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
-source "board/freescale/mx23evk/Kconfig"
-source "board/freescale/mx28evk/Kconfig"
-source "board/freescale/mx31ads/Kconfig"
-source "board/freescale/mx31pdk/Kconfig"
source "board/freescale/mx35pdk/Kconfig"
source "board/freescale/s32v234evb/Kconfig"
source "board/gdsys/a38x/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/hisilicon/poplar/Kconfig"
-source "board/imx31_phycore/Kconfig"
source "board/isee/igep003x/Kconfig"
-source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
-source "board/ppcag/bg0900/Kconfig"
-source "board/sandisk/sansa_fuze_plus/Kconfig"
-source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/silica/pengwyn/Kconfig"
source "board/spear/spear300/Kconfig"
source "board/spear/spear310/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
+source "board/ucRobotics/bubblegum_96/Kconfig"
source "board/birdland/bav335x/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
-source "board/technologic/ts4600/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/work-microwave/work_92105/Kconfig"
+source "board/xilinx/zynqmp/Kconfig"
source "board/zipitz2/Kconfig"
source "arch/arm/Kconfig.debug"
endmenu
config SPL_LDSCRIPT
- default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
+ default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64