config HAS_THUMB2
bool
+# Used for compatibility with asm files copied from the kernel
+config ARM_ASM_UNIFIED
+ bool
+ default y
+
+# Used for compatibility with asm files copied from the kernel
+config THUMB2_KERNEL
+ bool
+
# If set, the workarounds for these ARM errata are applied early during U-Boot
# startup. Note that in general these options force the workarounds to be
# applied; no CPU-type/version detection exists, unlike the similar options in
config CPU_V7M
bool
select HAS_THUMB2
+ select THUMB2_KERNEL
select SYS_CACHE_SHIFT_5
config CPU_PXA
config ARCH_AT91
bool "Atmel AT91"
+ select SPL_BOARD_INIT if SPL
config TARGET_EDB93XX
bool "Support edb93xx"
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
+ imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
select CPU_V7
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7
+ imply CRC32_VERIFY
+ imply CMD_HASH
+ imply FAT_WRITE
+ imply HASH_VERIFY
config TARGET_BCMNSP
bool "Support bcmnsp"
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
+ imply FAT_WRITE
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
select CPU_V7
+ select SPL_BOARD_INIT if SPL
select SUPPORT_SPL
imply FIT
select DM
select DM_SERIAL
select BOARD_EARLY_INIT_F
+ imply FAT_WRITE
imply SYS_THUMB_BUILD
config TARGET_S32V234EVB
select ARCH_MISC_INIT
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
select SYS_THUMB_BUILD
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
- select SPL_STACK_R if SUPPORT_SPL
- select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
+ select SPL_STACK_R if SPL
+ select SPL_SYS_MALLOC_SIMPLE if SPL
select SYS_NS16550
select SPL_SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
+ imply FAT_WRITE
+ imply PRE_CONSOLE_BUFFER
+ imply SPL_GPIO_SUPPORT
+ imply SPL_LIBCOMMON_SUPPORT
+ imply SPL_LIBDISK_SUPPORT
+ imply SPL_LIBGENERIC_SUPPORT
+ imply SPL_MMC_SUPPORT if MMC
+ imply SPL_POWER_SUPPORT
+ imply SPL_SERIAL_SUPPORT
config TARGET_TS4600
bool "Support TS4600"
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
+ select SPL_BOARD_INIT if SPL
select SPL_OF_CONTROL if SPL
select DM
select DM_ETH
select SPL_CLK
select CLK_ZYNQ
imply CMD_CLK
+ imply FAT_WRITE
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select DM_SERIAL
select SUPPORT_SPL
select CLK
+ select SPL_BOARD_INIT if SPL
select SPL_CLK
select DM_USB if USB
+ imply FAT_WRITE
config TEGRA
bool "NVIDIA Tegra"
+ imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
+config TARGET_LS2081ARDB
+ bool "Support ls2081ardb"
+ select ARCH_LS2080A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
+ select SUPPORT_SPL
+ select ARCH_MISC_INIT
+ help
+ Support for Freescale LS2081ARDB platform.
+ The LS2081A Reference design board (RDB) is a high-performance
+ development platform that supports the QorIQ LS2081A/LS2041A
+ Layerscape Architecture processor.
+
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64
select OF_CONTROL
select OF_LIBFDT
select PINCTRL
+ select SPL_BOARD_INIT if SPL
select SPL_DM if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SUPPORT_SPL
+ imply FAT_WRITE
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
select DM_USB if USB
select DM_PWM
select DM_REGULATOR
+ imply FAT_WRITE
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
source "arch/arm/mach-stm32/Kconfig"
+source "arch/arm/mach-sunxi/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-uniphier/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
-source "board/sunxi/Kconfig"
source "board/syteco/zmx25/Kconfig"
source "board/tcl/sl50/Kconfig"
source "board/birdland/bav335x/Kconfig"